O/CbansheeRider

I quite buying disk and now just do monthly subscription. Been using it about 15 years now. Have u used the simple start. I think it's free but I can't remember it's limitations. Sent from my iPhone using Tapatalk

I shock or Hydrodynamic. I think are same company. My buddy has a set look just like those. Same ball joints. Sent from my iPhone using Tapatalk

Thx special. I guess I haven't looked close. Bike ran good when I got it so I haven't really touched it. Sent from my iPhone using Tapatalk

Do u think 35s are to big for mild port motor? Sent from my iPhone using Tapatalk

Ok. I'll check for some. Thx Sent from my iPhone using Tapatalk

The clutch arm on my sons banshee hits the float bowl pretty bad. It has a pro design intake on it and the arm has already been bent down. I'm concerned about it tearing the rubber boot. Can I flip the rubber boots around to angle carbs up and away from the arm? Sent from my iPad using Tapatalk

A younger guy left the parking lot today on a raptor 700 with a twist for his first ride on new quad. He was gone ten minutes and he'd whiskey throttled it. Broken subframe,two bent silencers,cracked plastics etc. He was sore but not injured. Sent from my iPhone using Tapatalk

Thx guys. I'll already got some for nasty for good price. They are for my buddy so. Thx Shiner that's mighty nice of you. I don't really head to Salem much but I drive thru once in awhile. I don't do so well when I head to more populated areas so I try cross the coast range as little as possible. Sent from my iPad using Tapatalk

I'm looking for a set of lower engine struts and the hardware to go with them. Thx Sent from my iPhone using Tapatalk

About thirty seconds with aluminum foil and soapy water Sent from my iPhone using Tapatalk

Rub with a ball of Aluminum foil and soapy water. Sent from my iPhone using Tapatalk

Thx slower. I know a lot guys on here don't like trinity but I don't wanna buy a new head as I just bought the bike for my son and I'm not too keen on him having a faster bike than me so I'll just get some domes so I can run non ethanol. Sent from my iPhone using Tapatalk

Ok. I'll wait to hear back and call another sponsor if he tells me the same. Who did u go thru? Sent from my iPhone using Tapatalk

No cheetah just a stock cylinder bike. I've got a call into redline yesterday so I'll just wait for him to call back maybe Monday if that's best route. Thx Sent from my iPhone using Tapatalk

I'm looking for set of domes for a trinity cool head. It currently has 17cc domes and I would like to run pump fuel or 50/50. Let me know if anyone has some thx. Sent from my iPhone using Tapatalk

I got some. Thx Sent from my iPhone using Tapatalk

Payment sent on pro tapers. Thx Sent from my iPhone using Tapatalk

Yes srry I thought of that right after I posted Sent from my iPhone using Tapatalk

I'm looking for a set of banshee hubs to put on a blaster. If you have some pm me please. Sent from my iPad using Tapatalk

So I bought this one. Guy just pulled it apart had stock crank trued and welded. New wiseco pistons on stock bore. It has 35 pwk, lrd adjustable pipe, trinity head,stock timing plate ground for 5 degrees. Bike is very clean and the oem 97 plastics are hardly scratched. I don't know why this guy felt it was okay as he seems very knowledgable but it has 17cc domes in it and I checked comp it was 192 lbs and he said I could run pump fuel. I did not want to stir the pot with himand I drained gas filled with fresh vp110 now I just gota wait to rip it around. He only put two rides on it said it was good on pump. Sent from my iPhone using Tapatalk

Still might buy the red and black one. Was asking opinions in that thread so I thought I'd throw it out that I'm still shopping. Sent from my iPhone using Tapatalk

So I'm in market for banshee in Oregon sw Washington. I'm going to be at the swap meet in Portland Friday. I've got 2500 to spend so if anybody has one or knows of one let me know. Thx. Sent from my iPhone using Tapatalk

I think I'm gonna go for red and black one. Thx guys for input. Sent from my iPhone using Tapatalk

He's local guy works on stuff and he's built a few drag banshees trx etc. He seems to know his stuff pretty well and did nice job on my buddy's motor after he destroyed his cases from throwing chain. Motor is brand new barely ridden. I'm sure he did some mild porting work and such. I also had him rebuild my kids cr125 and it's a screamer now. It be a trade and cash for this trx250r I bought my son for 1300 and put 200$ into but I really just wanna try to get him on a banshee that way parts can swap etc. the trx has been a pain in the ass and I would need to take to a builder because it would need machine work to be right. Sent from my iPhone using Tapatalk

So the guy with yellow one said it rips and keeps up with 11 yfz blah blah. He doesn't know anything about motor cause it was his buddy's who is now in jail. Guy put 1500 into motor but I'm concerned cause it looks pretty crusty. Sent from my iPhone using Tapatalk