willardwright59

Im wonderin if i should drop some money on some yfz shocks for my banshee. What will i have to do to make them fit?? Thanks for any help.

To answer your question: yes your bike will run a little shitty with it being outa sync. Tors are just a pain in the ass. Id remove them before i did any major mods. Vf2 or vf3 reeds are a huge improvement over stock. But not something your really gonna notice. But it will let your bike be crisp and more responsive. Guys here love messin with peoples mistakes. So id just watch what i say and spell.

Im helpin a friend out with a build. Lookin for some parts for a 2007 trx 400ex. Looking for the following: aftermatket front bumper high performance cam Pro circuit head pipe bigger carb Lemmie know what youve got thats performance. Thanks guys!

Keihins

Keihins

Could i make some? What should i use?

Whered you pick that up at?

I recently bought some 28mm carbs cheap. They are in beautiful shape. My question is: going from stock carbs with no tors and 350 main, 1st clip on needle, 30 pilots, air screw 2 turns out. Where should i start with my new carbs?? Thanks

Nice man! Who did your porting? And what kind of port is it?

Pics will be posted as a link to photobucket. I mean im kinda wonderin why some have this problem and some dont? I told kevin it was stock so im sure im gonna have what ya'll do or close to it.

I got a set of pods from hjr for my 26mm carbs, i put them on "made for your stock bike" bullllllllll shit! They hit the frame where the rear shock mounts, and are about 1/4" away from my pc pipes. The outerwears will melt wont they? What should i do to fix this?

I really need a good set of works shocks but just dont have the money now.

Pm sent

Im looking to get a set of yfz shocks or aftermarket shocks for on my banshee. Please let me know what you have. I have a good yellow stock set to trade with some cash. Thanks!

Im looking to get a set of yfz shocks or aftermarket shocks for on my banshee. Please let me know what you have. I have a good yellow stock set to trade with some cash. Thanks!

Pics to [email protected]

Very good guy! Keeps in contact with you throughout the whole purchaseing process. Tells you exactly what your buying and gives you a hell of a deal! Good seller to deal with!!!

Could you cut the stock a arms and just use some pipe to extend them? By that i mean cut them, use a bigger piece of pipe and slip the a arms ends into them to extend them a few inches?

My link

[/img]

The only thing that gets me is it ran fine with no lid and holes drilled. I didnt think pods would affect that so much?

About what size?

I recently upgraded my banshee from airbox with no lid, to pods. My jetting is 340 main, 27.5 pilot, airscrew 2 turns out, clip at very bottom of needle. Plugs were perfect caramel brown when it was rode last. Now it wont start or run. And from what ive been told os that my pilot is too lean? Well it ran fine before i did the pods. But i guess my idle screws were the whole way in and it barely idled. So i need some help here? What do i need to change?

I have a stock axle good condition, ready to run I have stock a arms also great condition brass bushings I have stock carbs, excellent condition. Work great! I have stock shocks also. Yellow in color clean up nice and work great. All parts are still on a banshee that is being taken apart. Willing to trade for: 28+mm carbs Extended axle extended a arms Works shocks. Pm me offers and we can work out a deal with cash or trade or both. Thanks.