SlowMoe

Thanks bro! Clutch sold Basket sold Transmission: Every other dog is cut off 2-6 gear. What this does is effectively reduces the amount of missed shifts under power by 100%. IMO everyone should have this mod done to their tranny if they are running 55hp or more. It will cost you $200 plus shipping both ways if you send yours off...

up

up

There is a 3" rip behind one of the paddles, hence the low price. They are, however tubed and the tubes have held up very well for close to 3 years. The rip looks bad but all you do is squeeze some permatex ultra black in the cut and air it up. Then spread the silicon around the hole and it is very well protected after it dries. These tires work great for a mild build like a dune ported 350. $140 shipped

Also Boyesen Pro series reeds brand new $55 shipped for BOTH sets

Alright i have a trued and welded crank. My original crank was trued and welded by a site sponsor which I used and re checked after 15 hours and it was way out of spec. I then bought this crank off Sleeper06 which came out of an 05. It was just checked and hasn't been ran since, so i guarantee is is within spec. $125 shpped Cut transmission. This has the same mod done to it that HJR charges $200 for. I will also throw in the shafts forks drum and shift star if you need them. I need $135 shipped. Ported cases including all hardware. $150 shipped Billet wiseco clutch basket $110 shipped Brand new in box heavy duty clutch pack. This clutch will hold 90 hp with the included drag springs.. I will also include the light/ medium spring combo. $75 shipped

I can assure you it is not blown. Thanks for that BTW

THe swingarm comes with the chain AND the brake line extension. Make me an offer I need this stuff gone.

Make me an offer. Here are some pics as requested. I am also open to offers on thi stuff.

Ok pipes are now sold as well as the cylinders with the pistons. All I have left is: Holeshots with wheels $140 shipped +8 Swingarm $120 shipped Boyesen pro series reeds $75 Shipped Complete bottom end unassembled crank is guaranteed to be within spec. $500 Shipped 11 paddle haulers $140 shipped Marvin Shaw competition rear shock $130 shipped Pro design cool head w/ 21cc domes $125 shipped And a partridge in a pear tree

I'll measure the shaw and take pics tomorrow nite. The swingarm is a stock extended one and looks pretty nice. Sorry about the pics I will have the rest of them tomorrow evening if at all possible.

I'll get some tonite..

Whoa bro easy. The dent in the pic is on the inside by the pingel. You can't see it at all when installed. Here I took some better pics here you can see the other dent isn't bad at all.

Stock cylinders w/o pistons ......................SOLD Stock milled rechambered head.................SOLD I would take 180 shipped for the trans. Here is a better pic of the bad spot on the paddle tire. It was like this when I bought it almost 3 years ago. It had a 10 mill cheetah engine on it at that time too. What I do is let the air out and squeeze in some RTV black. Then I air it up and let the silicone ooze out and spread the excess to protect the pucnture somewhat. That is what you see around the hole.

Stock bore honed not ported

Shocks are sold No studs on the cool head, not ready to part the bottom end yet Pipes have 2 small dings the one in the pic is from the petcock my wife couldn't find the other one but I'm pretty sure there is one more small ding no worse than the one in the pic http://i1195.photobucket.com/albums/aa392/inspectorb/a-1.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/e.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/c-2.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/d-1.jpg

Sorry for the crappy pictures if you need better pics of any item I will take more tomorrow..

Ok I need this stuff gone ASAP so new prices There are pics of some of the stuff in the other thread but I will try to upload the rest tonite Vitos fat bastards chrOme near flawless 400 shipped Stock cylinders unported with good pistons pro design studs fresh hone 225 shipped Pro design cool head with 21cc domes 125 shipped Stock head milled and rechambered I bought this from hjr 90 shipped 11 paddle sls haulers tear behind 1paddle they are tubed but tubes have held for close to 3 years so... 190 shipped Complete bottom end crank trued welded just checked still like new brand new heavy duty drag clutch billet basket cut tranny ported cases shift star mod +4 timing plate all covers new gaskets seals it is currently apart so I can soft bolt it so you can inspect it if that makes you feel better or I can assemble it for you your choice 775 shipped Marvin shaw rear shock 130 shipped + 8 swingarm comes with chain 125 shipped Boyesen pro series reeds brand new never used 75 shipped Itp holeshot rears on stock wheels painted black but paint is chipping 80% or more tread 150 shipped Stock bore cylinders good bore fresh hone 110 shipped I'll try to get pics tonite sorry if you pmed me previously I've been busy thanks for looking

IF they did fight, I think that if GSP stood there and played Anderson's little dancing games for long enough he would get knocked out. BUT I believe GSP is too smart to fall for that. I think GSP would (should) go for the take down as quick as possible and try to wear him out on the ground. GSP is so strong and athletic for a welterweight, he just doesn't have the reach to stand and trade with a guy with long arms who has such a nasty jab. I think it could go either way but GSP's my boy and I'd have to put my money on him.

To the top

Exactly! If you read back I came to this realization a few posts back. When the engine is below peak rpm the cylinder is filling and bleeding before the port closes. The lower the duration the faster it will close and seal in pressure at a low rpm. Even though this mod wouldn't change the duration per say, there willl be more area for the pressure to bleed out before the port closes, causeing a narrowing of the powerband. On the other hand above peak rpm there will be more area for the pressurized pipe to feed the cylinder so your overrev would be improved. Man I wish I had a dyno

Carbs..........................SOLD Pingel.........................SOLD Front shocks................SOLD Cylinders.....................SOLD

Yeah on my aftermarket clutch cable (assuming the stock is similar in design) there was the chance of the cable sliding in and out of the little tee that splits the cables from 2 to 1. If one of the cables slid out and got hung up that could be your problem. Take your time and inspect the cable real good. I doubt it got stretched that bad, but I've been wrong before...

TTT

Hey RB did your porting huh? Are you happy with the results? He did a banshee for me a few years back and I was extremely impressed.