Craig_b

Shipping is fast. Takes longer to get through customs here than it dose for them to get the order to the country

Hey, Im looking at buying a Durablue eliminator 2+2 axle. Dose anyone have any feed back for these, Or is there any other 2+2 axles you would recommend that is reasonably priced? Cheers

Would you be interested in shipping rear brake res overseas?

cheers that will be easy then, do you know about the carbs and airbox or anyone else out there?

Before i go buying parts thought id ask a couple of questions. i have serval cylinders, 35mm pwk carbs, upp intakes, no reed spacers. will i have an issue fitting oversize bowls from the likes of f.a.s.t? as i see for some the standard bowls hit the clutch arm with the above setup and cpi inframes im also wanting to run an airbox, im sure ive read somewhere that the airbox will need to be cut up because of the cpi stinger's, is this correct and if so dose anyone have pics? and.. my kick start idler gear is pretty worn, dose anyone make a replacement bushing or is the idler gear a throw away job ? cheers.

Cheers dudes

hey all, has anyone purchased one of these kits " https://www.rockymountainatvmc.com/p/1151/5794/Pro-Design-Pro-Flow-Uni-Intake-System?term=pro%20design%20banshee", whether from rocky mountain or ebay etc? wondering what the quality of the uni filter is like, dose it have a removable outer foam that can be oiled? when i asked rocky mountain they said the filter did not have a part # on it. cheers in advance

cheers, haha yeap needs to be running asap cheers will be running asap

i dont know what you want? ive got no time for you at all

no worrys there, i hadnt gotten around to doing measurements. i thought pics might have told part of the story but my mistake. cheers for ya help though no worrys, as above i thought pics might have given and indication and hadnt gotten around to measurements but thats all good. cheers for ya reply

hence the post / question, since the build is getting closer to being finished was looking for an idea of how its going to run. cheers cheers for ya replys, i had the porting and domes done by the same person. ive heard nothing but good things about who i have had it done through, was just looking to see how they stack up compared to other servals out there to get an idea of how it will run. cheers for your replys

more interested to see what other serval port jobs look like to see how this compares really. im no expert on them

yeah, im interested in how it will run, and interested to know how aggressive or not it is etc no worrys ill sort that and get back

its a serval cyl measurments from where to where?

hey all, interested to know what kind of port job you would call this, all i hear is drag,dune,trail port etc but have never seen what the actual difference is. also the last photo looking into the intake is upside down, has been rotated on photobucket, but for some reason computers and stuff fucked it up bud

this is the twin powerband model http://www.gumtree.com.au/s-ad/moorebank/motorcycles/yamaha-banshee-2011/1084541652 and this one dont come with any recipes, learn how to make your own damn sloppy joes http://www.gumtree.com.au/s-ad/alexander-heights/motorcycles/350-banshee/1084533117

85mm bore + 10mm stroke would be 726cc i think ? cant help ya on who makes them though

that front bumper !! http://www.trademe.co.nz/motors/motorbikes/motorbikes/quads-atvs/auction-917006466.htm

This is my piece of America. Such a cool truck to drive, Compared to the other shit we have here.

is it in general all honda thumb throttles or from a specific model ?

Id say dave is right. Looks like a keeper spring just to keep your main spring captive. Ive got the same set up but havent ridden on it or set it up. The small spring should collapse completly before the larger spring takes effect

Might be a speedway bike. Left turns only so port left side. job done

someones been tarnishing the kawasaki banshee name with them yamaha stickers on it. not craigslist but check this beast.... http://www.trademe.co.nz/motors/motorbikes/motorbikes/quads-atvs/auction-879307944.htm

yo whats up, i regrettably bought a banshee in bits, i bought a shit load of good bits, and now in the process of putting it together im finding more and more things missing. just putting the feelers out to see weather i buy OEM, 2nd hand (some things really need to be really good condition), or aftermarket from somewhere (or maybe another bike)? ideally buying a bulk lot from someone/somewhere than buying 100 individual pieces. anyway heres what i can see i need, any ideas where to get or who has, throw that shit my way. thinking it might be best for me to pick up a running bike and put my good stuff on it as not being from the states or aussie, getting parts is a pain CHEERS !! #2 head nuts x 10 #18 head studs x 10 #9 dowl pin x 4 #19 x 1 #17 x 1 #15 x 1 #13 x 1 #10 x 1 #9 x 1 #8 x 1 #4 x 6 #2 x 1 #13 x 1 #15 x 1 #28 x 1 #31 x 1 #7 x 4 #9 x 2 #1 x 2 #7 x 2 #8 x 2 # 18 x 2 #14 x 2 #15 x 2 #17 x 2 #1 x 1 #2 x 2 #3 x 2 #3 x 2 #6 x 1 #9 x 2 (or 4?)

do you have pics of the white and blue shee on its own tom? wheres that graphics kit from ?