trx4502shee

+1

If he was a good builder and really broke it in he should have noticed if it was to rich or to lean in my opinion it was caused by either to much pistion wall clearence or the squish was not right and the piston hit the head and rocked breaking the piston skirt.This is what happened to my 4mill cause the squish was too tight....banshee piston

How much without trade

http://cgi.ebay.com/ebaymotors/BANSHEE-DRAG-RACING-130LINK-HEAVY-DUTY-GOLD-CHAIN-_W0QQcmdZViewItemQQhashZitem43a4f51cb8QQitemZ290530335928QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

It sounds like you have a ring of rust in the cylinders from the pistons sitting in one spot for so long with the spark plug holes open for moister to get in which is keeping it from making a full revolution that is why you can spin it clock wise with the stator and when you use the kickstart it moving counter clockwise take the head and cylinders off and get the cylinders honed you should be good to go after that.....

Wtb 38-40mm intakes just let me know what you got Thanks

I bought a tank with a duel pingel.It was exactly as described had great communication,great price and fast shipping will do business again

Want used 38mm intakes at used price....thanks

imo i would stay away from Namura I've had nothing but trouble with them you know the saying you get what you pay for...lol I like wiseco pro lite they are made different i think one is forged and the other is cast i think I know Namura will crack and come apart in your cylinder were as wiseco will usually bend instead of crack just my .02

Just to let you know they don't sell 35 pj's they are more than likely 34s if they are 35s they are pwks unless you had them bored

+2 http://cgi.ebay.com/ebaymotors/Tusk-Clutch-Kit-Yamaha-Banshee-350-87-06-/180552987726?pt=Motors_ATV_Parts_Accessories

you should just buy a cool head and get the domes you want instead of paying a machine shop to do the stock head if you ever go a different route with the top end such as go bigger with the pistons like 65.00 you need to get the head cut for that piston size

pics to todd_stroble2000@yahoo.com thanks