cce12

What times are you shooting for on asphalt 1/8 mile? 5.6ish? Good luck with your new setup!!

Now that's some MacGyver shit! lol

do you still have the stem?

crank sold ..

Bump

I'll take the v2. Pm sent

Thanks Bryan for the reply. I will hold off on the 2 step until I get my 60' to where I want it to be, once there I will add the 2 step in to my set up. I want to get a handle on my clutch set up before I go chasing my tail if the 2 step might be bring up other issues at the same time. Thanks again

I am looking to use a MPS or pingle adjustable switch clutch lever with a drl-300 and wanted to know if anyone has used this before and if so where is a good starting point on making the adjustments on the lever. My goal is to get better and have more consistency with my 60' time. Any pointers or suggestions would be appreciated. Thanks

price drop... A.R 19x10x8 sd23 $100 shipped +10 stock style swingarm $ 140 shipped 35mm round carrier $ 45 shipped 35mm intakes $ 55 shipped blaster axle $ 50 shipped

billet basket sold.

carbs sold crank pending

Yup.26" drag axle with carrier. That's without sprocket/ brake rotor..

I thought i'd post this here for you guys that were wondering about the difference between the two... 10 pounds! i hope this means i'll pick up a couple of tenths when i get back to racing... lol. http://s1172.beta.photobucket.com/user/cce1975/media/D55B2539-3156-4FDC-88BD-2B0D8722D472-19438-0000054AA8EAEAFE_zps4e15c845.jpg.html?sort=3&o=1 http://s1172.beta.photobucket.com/user/cce1975/media/FFF89367-1CA6-4A32-9BA2-33099965153C-19438-0000054ABF67D3B2_zps63d62bbc.jpg.html?sort=3&o=0

4 mil hot rod/ long rod crank with only a few hours on it. $320 shipped http://s1172.beta.ph...html?sort=3&o=3

New prices... 4mil hot rod 115/rods $320 shipped mull 4mil stock race head $70 shipped billet clutch basket with gear $110 shipped 35 pwks with outerwears,filters $250 shipped 35mm intakes $65 shipped blaster axle with hubs $70 shipped 35mm round carrier $50 shipped +10 stock swingarm $155 shipped

These things here are up for sale... http://s1172.beta.photobucket.com/user/cce1975/media/DFDAEF7B-6416-40DF-B971-10EDCE763E43-6261-000001B4EA2BA9FE.jpg.html?sort=3&o=3 +10 stock style swingarm $165 Billet clutch basket with gear $120 A.R tires 19x10x8 sd23 $115 plenty left on tires,i just went bigger: http://s1172.beta.photobucket.com/user/cce1975/media/0544F7A8-95D9-44BD-80B7-A1188F4F03D8-6286-000001B57778ACF0.jpg.html?sort=3&o=0 35mm pwks with filters,outerwear and intake $325 4mil hot rods crank.only a few hours on it. $340 mull 4mil stock race head. $75 Will sell the crank and head for $400 blaster axle with hubs and carrier. $140 chain came off and hit the carrier but it works just fine. http://s1172.beta.photobucket.com/user/cce1975/media/DFDAEF7B-6416-40DF-B971-10EDCE763E43-6261-000001B4EA2BA9FE.jpg.html?sort=3&o=3 Used!! 795 series pistons few hours on the rings $45 Prices includes shipping..Gift or pay the paypal fees.. pm me with any questions. if you want more pics of anything i can text them

This is my set up: quad just a stock frame with a + 12 swingarm + wheelie bar. Motor is a 421 cub, 1-5 override, race gas with a 210 rider. I was just making a general statement, but any suggestions would be helpful. I've played with my tire pressure from 10psi - 7psi, burnouts, no burnouts and it seems to be a fine line to what my motor likes.

Hey Bryan- I want to first say thank you for starting this thread, because I now really have a much BETTER understanding on making the appropriate adjustments to the lock up. Before this thread my best 60' was 1.63 now in just 3x's to the track it is mid 1.5s and I am not even close on my setup yet. I think that you have posted all the correct information on the thread for everyone to read and even dropped some hints to get us moving in the right direction. I was very surprised with the S.P. I had to use before I got my 60ft to start improving. My goal is to get into the low 1.4s. With that said thanks again.

I had Chris over at Wheelman Chassie build me a +12 swingarm/wheelie bar...to cut to the chase I couldn't be any happier with what I received,can"t beat the quality or cost. Highly recommend his work. I'll post some pics at a later point in time. Nice work CHris. Thanks Casey

get rid of the 18s and get american racing 19x8x10gt or sd-23...

Barely used 42 and 44 rear sprockets. $40 shipped for both. +2 swingarm. $150 shipped. I don't know much about the swingarm - it came on a bike i just bought. Have no use for it, it's straight, no cracks.

Looking for some 35 or bigger pwks. Gas carbs Thx

I'll take the f.a.s.t basket. Pm me with your paypal info.

sent you a PM

WOW!!! That Sucks Bro!!!!!!!!