dmfisher71

I WOULD EVEN BE INTERESTED IN TRADING FOR A DIRT BIKE 250 OR BIGGER

thanks Builder i just dont mess with it much at all anymore and i dont have a truck or trailer anymore to pull it, if i dont trade it i will end up dropping a small block in it here sometime. hell there is a little over $1000 in the cage and the tires on it

sorry forgot to ad the pic

ok i will try to trade this now.... i have a 1988 Chevy S-10 Blazer 4x4 mud toy off road only not currently street legal but could be it does have a title. it is slightly lifted, has a bullet proof home made front bumper (very solid bumper), it has a professionally welded roll cage inside. it has a 2.8 liter v6 with am auto tranny 4x4 does work and it sits on super swamper boggers. keep in mind this is a play toy and its not the best lookin thing out there but it is fun. it does come with (not installed) jeep yj control arms and coild springs for a straight jeep axle. for the right trade i may be able to find a sbc 350 to go with it i would like to trade this for a Banshee preferably but would consider other quads (400ex, trx 250r, lt250r, or similar) prefer a 2 stroke quad dont have to look the best but it does need to run decent if it needs a LITTLE work thats ok i have more pics if some one is interested i live in Brownstown, IN i am pretty much right in the middle of southern IN (1 hour north of Louisville, KY and about an hour and 15 minutes south of Indy) message me here or feel free to email me directly at [email protected] i can only do a trade at this time THANKS

ok i will try to trade this now.... i have a 1988 Chevy S-10 Blazer 4x4 mud toy off road only not currently street legal but could be it does have a title. it is slightly lifted, has a bullet proof home made front bumper (very solid bumper), it has a professionally welded roll cage inside. it has a 2.8 liter v6 with am auto tranny 4x4 does work and it sits on super swamper boggers. keep in mind this is a play toy and its not the best lookin thing out there but it is fun. it does come with (not installed) jeep yj control arms and coild springs for a straight jeep axle. for the right trade i may be able to find a sbc 350 to go with it i would like to trade this for a Banshee preferably but would consider other quads (400ex, trx 250r, lt250r, or similar) prefer a 2 stroke quad dont have to look the best but it does need to run decent if it needs a LITTLE work thats ok i have more pics if some one is interested i live in Brownstown, IN i am pretty much right in the middle of southern IN (1 hour north of Louisville, KY and about an hour and 15 minutes south of Indy) message me here or feel free to email me directly at [email protected]

the link doesnt work because everything has been deleted this was posted in december of last year sorry guys since i got rid of all my banshee stuff i dont check this site HARDLY ever... all this stuff is long long gone. my apologies to every one sorry fellas

oh by the wayu would need to be close to southern Indiana (Brownstown, IN)

ok i got a Traxxas revo nitro 4x4 r/c truck, just put a big block conversion on it with a new Ofna .26 motor traxxas hi-flow header and resontator pipe, heavy duty suspension pushrods and tie rods (red), tranny has forward only kit installed, brand new (installed last thursday) aluminum front and rear skid plates steer servo skids and front and rear bumpers, 2 sets of wheels/tires stockers and 40 series pro line bow ties on chrome rims, aluminim wheel hexes, like new body. i have not even started the new motor yet i am waiting on the starter box to get here (ordered last week). alot of extra parts and extra supplies. i am sure i am forgetting something. i can email pics i cant post pics on here from my mac (its an old mac) i am just seeing if anyone would be interested in this i know its a longshot but i would like to see if anyone has an older banshee, 400ex, or something like that, i dont expect it to look perfect or run perfect but halfway decent tires would be nice but not priority.. or i would sell this if i get a good offer message me through here or email me directly [email protected] i can also text pics

bottom end SOLD air box pending tires SOLD if some one wants to pick it up i am in Southern IN zip code 47220 i will take $200 for everything that remains and even have a pair of other front rims (bald tires)

this shit is just to funny

man if i were a little closer i got an 87 roller i would let go for $450 and it has like new set of ITP holeshots on it. i am in Southern Indiana thats a little to far to drive

bump

i have an 87 j arm banshee i am parting out or will sell whole (whole it does not run at this time and is partially disassembled please call for details) well sell entire quad for $600 (firm) you pick up brownstown, IN 47220 I HAVE NEVER SEEN THIS RUN IT HAS A BAD WIRE HARNESS go here for pics http://s919.photobucket.com/albums/ad31/dmfisher71/banshee%20parts%208-28-10/ here is a brief list of parts i have bottom end motor (missing stator cover) stator wires are kinda a mess but they are there good crank, kicker, and billet shifter-- $325 obo wont sell parts off the bottom end sold as whole --- SOLD --- cylinders and head smooth bore needs a hone had good compression with wiseco pistons, with stock reeds -- $150 obo ---SOLD--- white plastic front nose has a shatter on the left front white rear is good red tank cover (no radiaitor cover) white front and rear needs bleached and cleaned (is mildewed from sitting outside) --- $65 for all firm rims and tires stock yamaha gold rims with like new ITP holeshots (probably 95% tread left front and rear) $200 for set OR $125 per pair FIRM 2 into 1 head pipe (no silencer) dynoport brand i think $50 stock carbs (still has tors on them) $50 2 radiators $20 each no reserviors airbox no filter w/lid --$15 rear brake system --- $100 front brake system ---$ 75 j arm frame w/ j arms rear swinger and stock axle (all 3 shocks are staying on the frame BUT SHOCKS ARE BAD just keeping them on the to keep everything from falling --- $125 all prices are OR BEST OFFER Unless marked firm and prices are plus shipping to USA only

pm sent

pm sent

banshees are fun and fast but if you want something you dont have to tinker with everytime you ride you may want to look into a 4 stroke. love the banshees but they are sometimes a lot of work and can be a money pit.

ok i thought i was going to part this thing out but not sure what i want to do, here is what i will need. throttle and clutch cables round plug style wire harness for an old j arm key switch same as above silencer for an old 2 into one head pipe pair of rings for wiseco 65.5 mm pistons (dont really need these but it would be nice) red radiator shroud white front plastic (cut or uncut dont matter) complete seat OR just foam and cover (plain black cover prefered) front wheel bearings shoot me some offers still debating on what i want to do with this thing trying to see how much i will have into this thing thanks

here is a link to pictures http://s919.photobucket.com/albums/ad31/dmfisher71/banshee%20parts%208-28-10/#!cpZZ1QQtppZZ16

also got a 2 into 1 head pipe not sure of maker a little rough looking but probably clean up well and it has a rigged up mid pipe and silencer (if you want to call it that) $75obo and yuo can tell me if you want the so called silencer or not your call oh and big block the camera has been located

also got the complete rear brake system for $100 have the front also but i need to put fluid in them to make sure they work before i price them

sorry about that i do apologize they are white but in pretty bad shape need restored BAD i will put pics up tomorrow hopefully just have to find my darn camera

i have a 87 banshee i am parting out i have not seen this thing run has major wiring problem pulled it out of a corner of a garage he told me it sit outside for at least 4 years but did seem to have good compression bottom end motor crank seems to be good (have not pulled jugs off yet just head) $350 missing plastic stator cover looks like someone cut the stator wires right and left cylinders think they may need a bore but a hone may be just fine with pistons 65.5mm $150 kicker lever $15 billet shifter lever $35 newer stock yamaha bars $10 stock carbs with tors still on them $40 probably need cleaned real good seat pan only no foam (lost it on the drive home) $10 plastic rear no beaks $40 (needs shined alot of weather residue on it) front the r/s nose is busted $30 maier red tank plastic $20 decent shape (there was no radiator cover) stock radiator no over flow tank $20 (i have 2 of these) foot pegs (stock) $15 swing arm $40 front shocks $20 rear shock $10 (junk) stock steer stem $40 frame with front a arm/j arms and the brake/ hub assy. $150 no title like new (probably 95% tread) ITP hole shots on stock yamaha gold rims $220 for set or $140 pair with rims cdi box (round style) and coil $15 each (not sure of functionality) all prices are or best offer and plus shipping tp united states only and sales are final sorry no pics yet as i cant find my camera hopefully tomorrow i will upload to photobucket please email me at [email protected] or message me here thanks, Dave

like it says i am looking for a complete wire harness with the old round plugs for an 87 banshee prefer it to be "uncut" and not modified. with out with out cd(would kinda be nice to have another cdi) let me know and of course money is tight, meaning i cant pry much from the wife, so pm me let me know what ya got if any. thanks

Got a Sony ps3 slim less than a year old works great just dont play it, 250 gig has about 8-10 movies and several episodes of the simpsons on the hard drive comes with 11 games (please go to my photobucket link to see pic of games) one wireless controller all required wires and cables including a good 3 foot hdmi cable . selling cause #1 no time to play it and #2 need to get a snow plow the the garden tractor for the winter. thanks for looking would like to get around $400 for it OBO + $25 shipping (insured) will only ship to the United States (excludes Hawaii and Alaska) message me here or email me directly at [email protected] http://s919.photobucket.com/albums/ad31/dmfisher71/6-1-10%20%20new%20pics/yz%20250/