the baddest banshee

pm me a price for everything!!!

how do i measure ea. of those? whats the tool called for measuring these tolerances?

actually thats how i diagnosed the bad crank i redlined it till it stopped running and my frend sed however many minutes that took thats how many degrees out of true my crank is! it was actually 31 degrees out of true!!! good thing i cought this before it broke down in the woods! i will make sure to test my new crank in this manner to make sure my new one is really trued!!

actually thats how i diagnosed the bad crank i redlined it till it stopped running and my frend sed however many minutes that took thats how many degrees out of true my crank is! it was actually 31 degrees out of true!!! good thing i cought this before it broke down in the woods! i will make sure to test my new crank in this manner to make sure my new one is really trued!!

any special tools needed to remove and install crank? besides flywheel puller?

the crank seems ok no play or crunching in bearings shud i split the cases and check it out?

thankyou now how do i check if its good? if i send it to get trued and welded by FAST how much approximately would that run? one more question the motor i got has 1 ported intake runner 1 stock intake runner. do you recomend porting the other cyl to match myself or send it to FAST also? how much would that cost?

how do i "check" or do i just send it to get welded if i got it out?

i bought it in pieces i wanna check if its good before i reassemble the engine thnx!

how can i check if i have a bad bottom end bearing? they roll like sooth ball bearings? i boght a engine unknown assembled i pulled cylinders do i have to split cases to check the crank bearings?

how can i check if i have a bad bottom end bearing? i boght a engine unknown assembled i pulled cylinders do i have to split cases to check the crank bearings and rod lower bearing?

i will pay $50 for carbs and boot $5 for rear sprocket $5 for throttle cable $15 for a rear rim (j arm) $20 for complete stock exhaust all parts in usable condition pleese plus ill pay shipping thnx for the help in advance! happy holidays!

i have 20 inch chrome 5 lug universal rims and tires for a bansheee motor prefer running prefer near ny also have a coleman powermate generator 6250watt works great! wiill trade rims and gen for a decent motor may be able to add couple hundred cash after christmas http://s1183.photobucket.com/albums/x467/zzakariah23/ i also need carbs/ intake boot/ rear sprocket/ complete exhaust/throttle cable/a rear rim http://s1183.photobucket.com/albums/x467/zzakariah23/banshee/

http://s1183.photobucket.com/albums/x467/zzakariah23/