Joejr915
-
Posts
232 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Joejr915
-
I going to a 4 bar. Would 2 -1" be overkill or could I get away with 7/8" bars? My bar will 6 1/2 foot
-
Im looking for set dm pipes both out stator side, clutch basket with 2.54 or 2.68 straight cuts, dm reeds
-
Anyone have a wire diagram for setup a shift light also what type of shift lights u guys run?
-
What the best way to measure the height of the spring? To get rhe installed height. Also what a good starting point on base presure of all the springs together? 240lb of spring pressure for 421 cub
-
Anybody have pic or a diagram to setup a dyna drl-300 to a banshee wiring harness
-
Im looking for a delta reeds and upp intakes 39mm. Im also looking for a head with domes with 68mm bore.
-
Looking for a set of delta reeds and intakes 39mm and also head and domes for 68mm bore. let me know what u have perfer used please thanks
-
What the biggest motor you can build without being spread bore crank? What size crank or cylinder?
-
I have a 421 cub and was curious if a 421 cheetah would b better for 500ft drags
-
Which one runs better? Or produce more power?
-
i was tring to pm you slowerthanyou ur inbox is full , what setup do u use for ignition
-
those guys running stock ignition for drag racing whats your setup? i thought about tring a stock ignition this year instead of pvl. i want to try a launch limiter. what for cdi(dyna msd or stocK),coil,stator flywheel(cut or uncut), And where do you guys get your adjustable clutch lever switch at?
-
Im looking for a stock ignition drag cut harness if possible. I would like to look for complete if possible. I have a pvl now what to try stock ignition.
-
Whats a good mixing oil for alky
-
What sprockets do u guys recommend for my setup. 421 cub for 300ft also what gear to launch in? I will b running dirt im about 250 with +8 with 22" terrian traks. I was thinking 15-43 or 16-43 pull 2nd
-
I run 175 with gas. Does 200-210 sound ok for 500ft drags?
-
Thinking about putting my cub on alky. Whats a good compression for alky
-
Our track doesnt have traction that much in the past. This weekend there will be probably way to much traction. My question is would i need to take weights off lockup or put more on. Or should i put weaker or stiffer spring in? Also should i just gear it? Im running stock spring at the moment.
-
Thanks for ur ideas i got a 1" split collor for a frame mount and drill a hole in it for whatever bolt i was using then welded a tab on shifter for the other end i would post pics but dont know how
-
weld a tab on a shifter and put a bolt through it i just got my frame painted and i dont want to weld on it i didnt know if anyone had any pics of one someone bolt a plate on the frame
-
Whats the best way to mount a air shifter to a banshee
-
My drag radiator doesnt have an place for it to go to