Jump to content

AlkyGirl

Members
 View Profile  See their activity

  • Posts

    92

  • Joined

  • Last visited

 Content Type 

Everything posted by AlkyGirl

  1. AlkyGirl
    They are OEM but painted white. Sorry I did not specify..
  2. AlkyGirl
    They are OEM wacko.....just cut
  3. AlkyGirl
    The bitch will be done in two weeks...Shees gonna spend the week before St Patties on the getting tuned on her Alky Carbs and on the Dyno.
  4. AlkyGirl
    Thanks Hard Luck...saved me the trouble : )
  5. AlkyGirl
    Whos gonna make it out and what weekend?
  6. AlkyGirl
    THERE SHEE IS BEFORE....FOLLOW THE THREAD TO WATCH HER GET BACK ON HER FEET : ) HERE IS THE BEGINGING......
  7. AlkyGirl

    NP Skind

  8. AlkyGirl
    I think that is a bit much for a 4mil Cub.....I run +8 and 10 Paddles n myne but I also sit really low with a short marvin in the rear....I have not problems with keeping the front down and now problems with too much paddle bogging me down.
  9. AlkyGirl
    Stick with your fatty's or some T5's....also like savage said depends of mods and where you want your power.
  10. AlkyGirl
    Stick with your fatty's or some T5's....also like savage said depends of mods and where you want your power.
  11. AlkyGirl
    So how many of you all are gonna make it out here for PRES/VALENTINES day? I know of quit a few already and want to know if I cant expect more?
  12. AlkyGirl
    BFH and someone moving the arm as your trying to smack it out....Not Fun
  13. AlkyGirl
    Doesnt sound good....you need to do a compression check.....Snow=Cold and Cold=Lean and Lean=Piston melted to your cylinder possibly so do a compression check to rule that out....good luck
  14. AlkyGirl
    Im gonna have to say you need to go up on the pilot jet, the pilot jets main purpose it for starting and idle.
  15. AlkyGirl
    You get a crowd goin and Ill be there with at least 4 bikes....
  16. AlkyGirl
    Id say you definintaly need to fattin up a bit...sounds like starvation
  17. AlkyGirl
    +8 on my 421 but thats in sand....anything smaller than that I cant keep the front down
  18. AlkyGirl
    HAHA...I did that just for you to see if youd catch it loco....good lookin out
  19. AlkyGirl
    When I first got my banshe I put Rad's in it seemd to make a bit of difference in the top end and overall power. Of course when I build a bigger motor I swtiched to VF3's and I have 39 Pwk's. They dont seem to be over worked at all. I am a fan of the VF3's on any build.
  20. AlkyGirl
    like I said
  21. AlkyGirl
    so I talked to some people that have looked into setting up an event out there and it takes about 9 months to get permits and a bunch of $$$
  22. AlkyGirl
    I had a problem like this and it was the sator....
  23. AlkyGirl
    Sounds like you may have tightened your springs a little much? Did you try and loosen them a bit?
  24. AlkyGirl

    <3 : )

  25. AlkyGirl
    Shifting can depend alot upon your gearing you run too....just depends and something you will have to get used to...but I would say the majority of people take off in second

BHQ Quick Links

×
×
  • Create New...