SLOPOKE21

you said it was overhauled with good bearing and was welded up but you dont know if it pinned or not? if i was going to spend 800 on a crank i would just save up another 400 and get a BRAND NEW billet. no way in hell i would spend 800 on a USED forged crank whether it had good bearings and welded or not. hell you can find used billet crank for what your asking for this one.

how much for flywheel only?

What are they bored to and are they trenched? Sent from my SCH-I605 using Tapatalk now Free

I have some 12 paddle staggered extrmemes 72ro if interested. Sent from my SCH-I605 using Tapatalk 2

Is this still available? Sent from my SCH-I605 using Tapatalk 2

Old shitty studs* Sent from my SCH-I605 using Tapatalk 2

I agree that they might be overkill but I had some old shitty sis and I figured that if I bought new cylinders I might as well do it right and put top of the line shit. Im a firm believer in you get what you pay for. I had intended on spreading this motor so I went ahead and put the good studs in it and the next setup I buy will have them as well. They are 10 times nicer than stock studs though in my opinion. My next motor will have ARP or titanium everything in it. Sent from my SCH-I605 using Tapatalk 2

They dont add any value?? I mean they only cost like $10 a stud so to me that adds some value, and a little peace of mind knowing that is one less thing to worry about breaking. As long as the guy who bought them is happy thats all I care about. Thanks for your help though. Sent from my SCH-I605 using Tapatalk 2

The cylinders are already sold! Thanks for all the help guys. Sent from my SCH-I605 using Tapatalk 2

Open to offers guys. I really need this gone. Sent from my SCH-I605 using Tapatalk 2

I have a complete unported 7mil cub topend. Comes with ARP studs, domes, pistons, and head shell. Fresh build with little run time. Can text pics if needed. Sent from my SCH-I605 using Tapatalk 2

Thats why I said the cylinders were from Titan and thn when I referred to the domes I said Titan 20cc domes, but ys you are correct. Sent from my SCH-I605 using Tapatalk 2

No I was just trying to be a little humorous. Sorry if this caused any confusion. This isnt an auction. Sent from my SCH-I605 using Tapatalk 2

I have a 7mil cub cylinder from Titan Racing that is unported and has very little run time. Also comes with ARP head studs, Titan 20cc domes, head shell, and 2 fresh pistons. I have pics but they are to large to upload. I'd like to start the bidding at $1000. Sent from my SCH-I605 using Tapatalk 2

Someone correct me if I am wrong, but I believe these are a good trail pipe for good low to mid range power. I ran them on my 4mil cub back when I first started building my bike and they ran good. They also have a very unique sound that is love. I wish my shearer's sounded like these. Just find you a welder and tack up that hole. I would try and do it but I don't have a tig welder. I will do it with a mig if someone buys them and wants them fixed. I won't guarantee it to be the best looking fix, but there won't be a hole anymore. I don't have a use for them anymore. Sent from my DROID RAZR using Tapatalk 2