Boner

pm's sent.

30 bucks with the cable.

Sorry don't have one.

pics sent to everyone.

Yeah, its been well used but isn't broke or pushed up into the sprocket or rotor. open to offers on it.

I have an 01' that the crank went bad in and I'm parting it out. Couldn't load pics to site but can text pics. Located in New Tazewell,TN (37825) Open to fair offers on items without a price. Have no pay pal but accept money orders and cashier checks,all items shipped via ups. If you have any questions feel free to Pm me for my number or Pm me yours for pics,thanks. Will also try and help with shipping on larger items. Crank cases (no chain wack) $125+shipping gnarly pipes (few small dings in one pipe) $150 shipped 01' Frame (no breaks/cracks, stripped and painted copper) $200+shipping Black seat ( no tears) Black plastic (race cut front) Stock size Blue label front wheels ( look like new) $65+shipping 10" blue label rear wheels (minor bends on each one but both still hold air) $65+shipping Stock carbs (need cleaned) Stock swingarm (needs bearings) Stock port/bore cylinders (needs honed) Transmission/clutch basket Flywheel Rear shock Front shocks Front hubs (Brand new bearings in both) Radiator (no leaks) Stock head Front brake caliper (paint silver) Rear brake caliper (paint silver) CDI box Billet water pump cover (Looks new) Billet in-line cooler (has wear marks on fins in two spots) Pretty much its the hole bike minus crank/rods rear bearing carrier and axle/hubs and missing some nuts and bolts.

Pm sent.

Pm sent

Pm sent.

Where you located?

I can sell ya the whole seat.

Got a complete 01' roller. Can give bill of sale, Tennessee doesn't issue title's for atv's.

got a set of case's for an 01', Their in great shape with no chain wack.

FUCK YOU PRICK!

WOW! You can buy 2 rollers for that!

I know you might think I'm lowballin ya but I'd offer ya $150 shipped for them. seeing as how they where used when you bought them and then used them yourself, their no where near worth what your asking! Not being a dick, just letting ya know.

Were in knox county you at? I'm the local coca-cola guy for knox county I'd like to come by and look at it.

Well he did state it had some marks on the snout where a bolt came loose and rattled around inside and in the 2nd pic if you look close enough you can see what shape the weld is in......That pic and that remark about the loose bolt rattleing around was enough warning for me too pass it up. Not putting blame on you or defending alex29573, just sayin......

Bought a set of A-Arm bushing that was in great shape. Tony is a great guy to buy from he kept in contact until I received them and shipped them out fast and well packaged! I wouldn't hesitate to buy from him again. Thanks Tony.

Exactly what I had to do also. Spent 4 nights using PB blaster letting it sit over night beating it with a 5lb sledge with golf type swings,heated it and beat some more then finally just used a sawzall and did like troyzstang said. One of my bearings was completely gone like only the inner/outer race was left, the rest of it was dust and the bolt and sleeve where fuzed together by rust. Never did find any of the needles from that bearing!

If the kx125 out ran the cr250 it must have had major problems, but as far as smoking the raptor, You'll need more then bolt-on's. I had a 660 that was only bored .30 over with a full exhaust, stage II hot cams, k&n with no lid and would smoke a piped shee with regular bolt-on's in a 400-600ft drag. After 600ft it would run me down fast due to it have'n more top-endbut up too that 600ft mark I'd had'em.

No doubt, Just got the water pump cover,dipstick and case saver today and was very pleased with everything! Already bought a second round of parts from him and comm. with him is great. deff a good guy to deal with.

TTT....No one has anything to trade?

I want the timing plate and cylmers. Lol

$150 shipped is the best I can do.