9banshee6

i have them at 2 1/2 turns out

well the other day i was riding my bike and when ever i would give my bike about 3/4 of the throttle it would stay accelerated and run on its self . is it possible that my carb slides are sticking with something??

ya did that but it is still running weird

say im going on 3rd gear and im going (slow) about to climb a hill then i just give it gass is it supposed to bogg out or get balls cause mine boggs out on 2nd 3rd etc the only gear it dosent bogg out on is on 1st my modds are fmf pipes k&nfilter boost bottle

it dont know whats up with my banshee i just bought some new idle screws and there 2.5 turns out. ok say im in neutral i give it gas and it like says accelerated for like 20sec and then it goes back to normal whats up with that? thers like a bog at 1/4 of the throttle i have 290 mains.when i take off only one fatty is sounding you would hae to give it about mabey half so both of them couls sound what the problem????????

well the other day i took off my filter to check my carb slides too see if they were equal and they weren't so i did my best to make them equal so i rode it without the filter it was running better but still not right so when i put the filter back on hoping it was going to work better it was worse! it boggs out at about at 1/4 of the throttle and i just had my jetting done what do you guys think?

oki i know this is a dumb qouestion but where is the Timing Plate located??? i want to get the RDZ Timing Plate i s it good?

gosh hes new to them give him a break

yup the raptor

do the v force 3 reeds gain alot of power is it worth the 200 bucks what mod should i get for my shee that gives it power but is not too expensive besides pipes/fattys , k&n air filter, and boost bottle

the year

im thinking of getting her some wiseco pistons but is it worth the money what do you guys think of them?

thats what happened to me later i found out mymy carb slides were messed up but when i and adjusted my carbs it ran like cherry but make the vid about it

yup that's what happened to me my chain came off. Just dont over tight it or leave it too lose also make sure the lock on the chain is well put together cause then your chain will snap

i think its funny do you guys?

thats one strong bike

omg you people have no sense of humor!

haha she got what she deserved.

watch it ts funny

OK i have heard that you can take something off from something from pipes to make the bike louder louder but i not sure what it is so if you guys could help also is it hard?

i think the OEM plastics are better

ok when ever i ride my bike its really weird cause when you have it on neutral and rev it only on pipe sounds and the other dosent you"ll have to give it like half throttle so that other pipe could sound . Same thing when your riding it it sux! you give it gas and it like bogges out no power you"ll have to give the throttle little by little so both pipes could get .i took it to motorsports so they could check my jetting and on the paper it said (changed main jets from 370 - 290 . pilot ok) $337! so are my jets ok cause it still running like crap the only modsi have it fmf fatty's an silences k&n air filter boost bottle and i think it is ported and polished but im not so sure. i live in espanola new Mexico but im not sure what the altitude over here isso if you guys could please help.

i thought you were supposed to mix at 32:1