glamisaurus

Alignment and tension are good. The old sprocket was a JT and lasted a long time behind a T-Rex motor. Bike has stock cylinders now. Maybe I just got a soft one. Thanks for the suggestions.

Bought new chain and sprockets from Rocky Mountain ATV. The teeth on the steel rear sprocket were bent over in one day of riding. What brands have you had better luck with?

I used to have one. It liked to spit oil everywhere and eat power valves on a regular basis. The pistons for it are expensive. I sold it to a drag racer who blocks off the power valves. Might as well get a cub.

Glad I could help you guys out. Items still available: A-arms and tie rods $40 Desert tank $100 Stock carbs(TORS removed but one adjuster is broken), cable, twist throttle, and airbox w/boots $40 (I also found some reed spacers and intake boots I will throw in for an extra $20)

I have a buyer for the carbs but will let you know if it falls through.

Sale pending on the pipes.

For some reason I thought you were talking about their throttle cable. :laugh: I looked up that throttle and that thing is big. I have the Terry Cable standard thumb throttle and you have to move things around to make it fit also.

I ordered a cable from trinity and that is what they sent. It was bulky, did not operate smooth, and was expensive. It did not even put it on the bike. Just get a standard cable from some place like Vito's.

There is a guy on ebay that is selling the extensions for Blasters and Banshees for $60. He stopped making them and is selling what he has left. I used one on a Banshee for a while and it works fine but I would not use it if you race or jump big.

Racer's Edge has Wiseco custom make their pistons. They are good guys to deal with and usually have the stuff in stock.

Elka said that specific length is for their linkage setup.

It is close to an inch difference. The linkage would slam against the swingarm every time it extends.

No, it looks like I've got a buyer for the whole setup.

Old Banshee had the Elka on it attached to a Roll Design stock length swinger. I go to put it on the new Banshee with a stock swinger and it is about an inch too long. The linkage hits the swingarm before it is down far enough for the shock to fit. The shock is about 14.5" eye to eye. I sent an e-mail to Elka but was wondering if you guys have seen anything like this.

No

Frame, tires - sold Swingarm, silencers, shocks - in the process

Pair of 35mm PWK Air Strykers with K&N pods, a few pilots, and a few mains. I have outerwares i will send but they have a few small holes in them. Good shape. $200 plus shipping. PM me your e-mail if you want pics.

Thanks, good doing business with you.

Pic of the tank sent again. Not going to separate tires/wheels. I am not going to deal with Paypal right now. If you have not heard back from me please be patient, I am getting bombarded with e-mail .

Thanks for your input.

I have friends looking for a 2 to 1 manifold. I have a T-Rex right now and am sick of dealing with the power valves and race gas. My old Banshee with bolt ons went five hard seasons without a rebuild and never broke so I am headed back in that direction.

That's what I thought. Anyone need a pair of 35's?

Putting together a motor and already have a pair of 35pwk air strykers laying around. It would be cheaper to buy intakes than a different carb setup. Mods to include: +4 timing shaved head lightened flywheel Pro circuit pipes afternarket reeds dune port Too big or will it work decent enough for duning?

I am not to excited about using Paypal but most people ask about it. I don't want to get burned and would like the buyer to feel comfortable. How do you deal with exchanging money.

I am working to get back to everyones pm's. Shipping is extra.