SNTBANSHEE

100% usable my ass. I bought a set of front shocks from you before you were a site sponser. The shocks were not the ones pictured in your add and were beat to shit. The add said RED springs and I got fucked up yellow ones and to top it off one of them leaks. When I tried to get a refund you filed a nonpayment dispute with ebay even thought you had already been paid. I sent all the transaction info to ebay and they dropped the dispute. I figured , lesson learned, dont deal with this guy agian. 100% useable.......junk dealer in my book.

Impact wrench and a little heat goes a long way.

14/41 is stock. You might want to give 13/41 a try if you want more low end. If you can't pull the front wheels with just the throttle you should do some tuning because a stock banshee should have no problem doing a nose stand on command.

Man thats alot of rock. I would hate to bite it where you guys ride. I think I'll stick to the dirt.

Its all I use and I have never had an issue with it. Good stuff.

Use www.photobucket.com to host your pictures and then paste the image code diretly into your post.

Yeah ,when you pull the choke you are making the mix richer which means you are lean right now. You need to jet up. Check the pipe manufacturer's jetting recommendations and go from there.

Looks sweet. I'm for a few stickers and shirts when there done.

I was just dressing up the old bag boards and figured I couldn’t go wrong throwing some HQ style on them. I covered the stickers in 4 coats of poly so they should hold up pretty well.

If they are both leaking its probably time for a rebuild or you could just replace the float needle and seat.

A little attention starved, are ya.

I'm not sure if any site sponsors carry them but I would check with them first. If not www.fastbygast.com can take care of you.

I can’t imagine a better place to be. Sponsors are top notch, a lot of good people with a wealth of banshee info and a bunch of shit talkers to boot.

Aliens and 916's use the same pipe so the only real difference is in the sound.

There are 100 different ways to go but if you build your own motor you will know your machine top to bottom when your done.

I think we all agree they include instructions that say to use anti seize or loctite, no pic necessary. The issue is their customer service. I used blue loctite to assembly all nylon insert nuts and still broke three of them because they cold welded. When I called Alloy Boltz to get replacements they treated me like an idiot and pretty much said take a hike. A business is built on customer service and Alloy Boltz has none.

I just put the pipes on and they have maybe 2 hours on them. They were like that when I got them.

Ran into the same shit. Do not buy. http://www.alloyboltz.com/catalog/index.php http://cgi.ebay.com/ebaymotors/Yamaha-Banshee-Polished-Stainless-Steel-ATV-Bolt-Kit-/300352177883?cmd=ViewItem&pt=Motors_ATV_Parts_Accessories&hash=item45ee6286db

Man I am always a day late. I ordered a seat cover on Sat. and paid way more than that. Sounds like a great deal, I'm sure you won't have those long.

Trails 14-41.

The one with the ball in it goes on the carb with the choke knob. If you only get fuel when in the 'res" position you probably need to clean your sceens. Take the petcock off and take a look.