nitrocircus

i am looking for a rear marvin shaw shock for a +6 linkless swingarm. i also have parts i can trade or partial trade thanks.

i guess. does anybody here have a used rear marvin shaw for a linkless +6 they would get rid of for a decent price i also have lots of stock and some aftermarket parts i could put doun on a trade. thanks

ya thats what i was thinking. a marvin is a little pricey, is there any other cheap shock any one knows about that i could use for the meantime

i need some advise on what shock to use on a +6 linkless swingarm. can i use the same shock as a link setup or do i need a different shock. i have a r1 shock now. i just bought a swingarm and didnt know it was a linkless setup. any help would be appreciated. thanks.

i cant rember much about them i got them done 2 years ago and never used them i think he said it was a stage 3 port

here are some pics of my port job, i had them done from a place on e-bay, cant remember the name right now, but let me know what you guys think of the work. i had to pull them off before i could run it becouse of a bad head stud

wanted cheep crappy black rear fenders to cut

take a look at my brothers bike it is in the for sale section under "2000 banshee for sale $2000" all i did was cut right on the fender line, and round off the bottom, you can do the same with the back.

here are some pics, this is my brothers bike so call for answers thanks

when i cut mine i used masking tape to line where i wanted to cut them, and used a jig saw with a sheetmetal blade, it actualy cut prety smooth, then i scraped the edges with a razor blade to smooth out the cut ,sanded it with emmery cloth, then i carefully went around the cut with a propane torch and it made the cut nice and glossy. good luck

2000 banshee forsale, boarded 20 over cool head with 22cc domes boost bottle different clutches D&G pipes full skid plade nerf bars Lonestar axle Billet waterpump Front Works shocks To much to list, $2000 obo.please call with any questions! 715-681-0045

thanks i got them in but it was tricky they kept falling off even with vasoline but it helped a lot.

thanks but is there an actual bog bore o ring?

it mounts to the subframe using existing holes, it did not come with bolts, but i have a bunch of stainless bolts, i will look through them and see if i have any that will fit, if i do they will be included in the sale. the coolant bottle uses the rear air box mounts and bolts. Yhanks for looking

thanks for the info

i just got a set of big bore stroker domes and i cant seem to keep the bottom o-rings on them to install them because the seats are bigger , do they need big bore o-rings?

i am not shure what the advantages are but it makes it real handy to work on the carbs because they slide back in the mounts out of the way. i got them about a year ago and never used them, i mounted them never ran it, and took them right off because i got a nitrous kit and the tank mounted right in the way of them. i will try to do some research on the advantages.

come on make an offer these things are brand new

I have a set of new, never used uni filters with real carbon fiber tubes, and mounting bracket. It also comes with a carbon fiber coolant bottle bracket and upp carb boots to fit 35mm carbs. They will also work with stock carbs but you need the stock intake boots off your air box. The mounting bracket loosens so you can slide the tubes back to remove carbs without removing the filters and tubes. Real sick looking parts. $85 shipped, they are located in northern Wisconsin.

where would be a good place to send my domes?

i need my domes cut .012 to get the squish right i was wondering if it is possible to use a stock head gasket under the cool head to change that i checked the gasket and it is .012. i cant change the base gasket becouse of my porting any help would be appreciated thanks.

i will buy 2 of them in lime green also p.m. me w/prices

x2

i was at a gas station today and seen a flyer for atv drag races at the ASHLAND county fair i'm just posting this incase anybody wants to race it is in marengo wisconsin i dont know much about it but here is the web adress http://www.ashlandcountyfair.org/Event_Schedule_2.html

I checked my gaskets and i need an aditional .012, my gasket mesures .025 and my squish is .033. I am planing on running nitrous, i read on here i want about .045 squish to run nitrous and the .012 will set it at .045. My porting i dont think it is drag port that is what i was told but here is my port mesurements if any one can help me deck to exhaust 1.135 deck to transfers 1.690 deck to intakes- i have 2 large intake borts they are 2.970 and a small intake port that is 1.850 all mesurements from top of ports to deck Keep in mind i have a 4mil. stroker 115 long rod. This is my first build and i just want to get it right THANKS