Holyman

I might have some of that stuff... email me... [email protected]

Send me a weight... [email protected]

Did you get my email bro? I sent you a pic after we talked on the phone. [email protected]

Send me a email... [email protected]

Send me a pic and a price on the intakes... [email protected]

Well let me just throw this out there... Higher compression needs higher octane otherwise you have ignition problems, overheating, siezure etc. When you add more oil, you also increase the LEANNESS of of the air FUEL ratio which will often lead to improved horse power. The amount of oil should be just enough to lubricate properly for your engine. And the fuel jetting should be adjusted to the fuel you use. Since the oil ratio effects the cumbustability of the fuel, it's best to have as much fuel present to do it's job and not put more oil in there to mess with combustability. In reality, it's best to rely on the quality of fuel to make the power rather than excess oil.

yes... email an offer to [email protected]

Send me pics of the 2 setups you have and exactly what you are looking for in trade or how much you want... [email protected]

Still have the Vforce reeds? Send me an email... [email protected]

I always ran Yamalube... never had a problem. I switched to Amsoil Sabre 100:1 and run it at 80:1. I run in the full heat of summer in S L O W trails, I run in the snow at high revvs at -10deg for hours. I never change jetting and never had a hint of trouble. I have spoken to people who professionally race sleds and who run the 100:1 Sabre at 200 and 300 to 1 with no negative effects. As far as I can see it, Amsoil Sabre is one of the few things in the world that is BOTH good AND cheap

send me a pic of your current setup and give me a shipped price without the airbox... I have no need of that. [email protected]

Multiple career changes... just haven't had the time.

Send me an email with pics of the plastics and seat. I have rears with tires and I can I have a kicker that will NEVER rattle!!! email to [email protected]

How much do you want to sell the set for? Send me a pic... [email protected]

Send me a price on shipping tp IL zip 60087 and any trades you might want.

Alot of you old timers know that I have sold bearings for years. Due to several life changes, I no longer have time to do it. For around $1000, I will give you all the part numbers, purchasing info, and other stuff I have to get your business up and running. I have sold thousands of bearings all over the world and never had a single bearing returned. These are the best bearings on the market but I just don't have the time. In my best year, I made about $10,000 selling bearings alone! Email me direct and I can give you all the details... [email protected]

got plenty to trade

got a kicker and some other stuff but brakes are gone. kicker is like new off 2002. email me... [email protected]

Haven't talked with you guys in a while so it's nice to stop in and see what's up. Got a kinda neat story about an eBay sale. Many of you know I had a Blaster I was parting out. I sold most everything except the frame. Put it on eBay listed as frame with title. Sold it pretty quickly and the guy paid right away. A couple days later I wrap it all up and find a small ding in the frame so I let the guy know and he said he didn't want it because he was buying it for a friend and the friend wanted one in perfect shape. So I refund the money. And relist it. It's on there about 4 days and eBay kicks it off and says I can't list a frame only with a title. Gotta be a complete ATV that is running or can't sell it. So I argue {as most of you know I can} until I'm blue in the face telling them how retarded that is but they say no way to relisting it. Anyway... about a week later I get a call from the friend who the guy was going to get it for. No biggie, money is money and I send it down the road. Well I come home from work 2 days ago from work and there's a message on the machine from the State Police and they want to know who I sold the frame to. After tracking thru my papers and extensive discussions with the inspector, it turns out my frame was used on a stolen quad and it came back as my frame which was clearly documented on eBay as ONLY a frame. Anyway this guy rips off quads and buys frames with titles and then swaps the frames for the stolen frame. Turns out he sells alot of parts too. All I gotta say is that I'm glad my stuff has titles and it's all legit and registered. They have more dirt on this guy than a NewYork phone book and they are planning to throw the book at him.

I still have mine

I'm getting part otgether for a street shee. So far I am going to run a 335/35-17 rear tire and since that it kind of tall, I want to go with something kind of tall and wide on the front. I think I may be able to fit the R6 rear rim to the banshee front hubs. I want to get a junker first for fitment and to eyeball the size.

No, don't really need another one of those BUT I could use a Dodge Dakota Axle for the 6 bolt rim from the rear just one side, either one. Gotta be straight.

For you guys who know me, this is another usual wacko request... rear R1 or R6 rim. Flat spots, busted, bent doesn't matter with or without sprock or brake disc... another experiment. email me... [email protected] gotta be cheap.

Can someone tell me what the bolt pattern is for the sprocket? It is 5 bolts and I'm curious if it is bigger or smaller than 156MM on center.

I hate to break this to you but we're going to have to go back to kindergarden when you were stoned out of your mind on second hand smoke... The word "AND" means 1 also, 2 plus, 3 as a result. Just basic English you just don't seem to grasp. See when I was a kid we used to read childrens books that helped us to understand the meaning of the word "and". There were books like Dick and Jane and Spot. It was about 2 people and their dog. Not all three in one. We also had nursury rhymes like 3 blind mice. They were all blind and they were all mice but there were 3 distinct mice. Even the Three Stooges were all Stooges but there was Larry AND Curly AND Moe. They were not all the same. Even today there is Chrysler, Plymouth and Dodge and even though they may be made in the same factory, they are not all the same. We also learned in early grade school the words meaning possession. Mine, yours, ours, his, hers, thiers. These words mean... I have, you have, we have, he has, she has, they have. Then there are descriptive words like am, are, and is. I am, you are, we are, he is, she is, they are. These describe us as individuals or as a group. Hopefully these English basics will help you understand the texts you have exhibited a complete inability to comprehend. I don't have time right now to address the rest of your nonsensical rantings but rest assured, I will.