Jump to content

Sandfrk33

Members
  • Posts

    552
  • Joined

  • Last visited

Everything posted by Sandfrk33

  1. Have you tried changing your sprocket sizes? 1 tooth bigger in the front might help taking off in 1st gear.
  2. Just got back from dumont today. first trip with a new ricky stator 200w POS. High RPM miss. Checked everything on the bike. Carbs, jetting, plugs, Set the timing back to 0. Last thing was the stator. Put the stocker back on, ran like a champ. Luckily its still warrantied.
  3. How often would you guys suggest replacing reed pedals on VF3,s. I've had them on for a few years. Still runs fine, just curious.
  4. Sandfrk33

    +4 swinger

    Little more than I have to spend without a carrier. thanks for checking.
  5. Sandfrk33

    +4 swinger

    I saw it on here but didn't want to spend the extra $ for a new carrier. Do you have any other carriers that will fit it?
  6. Sandfrk33

    +4 swinger

    I'm looking for a +4 swinger if anyone has one. Stock carrier set-up is OK. The cheaper the better. Thanks
  7. Planning a trip to dumont jan. 31. Anyone else going that weekend?
  8. Twist is the only way to go . I like the motion pro better than streamline.
  9. I'm interested, but I don't know about shipping to CA. Have you ever shipped anything like this before?
  10. Thanks for the help guys. I doubt he still has proof after 6 years, but I will let him know.
  11. My buddy got hit by a rail in dumont this weekend. Bent his durablue axle. Can they be straightened, or is it trash. thanks for the help.
  12. When you get into the camping area, there is a marked road that leads to the big dunes. A finger comes all the way to that road. We usually camp right at the end of the finger. Look for a red/silver f-250 with a 5th wheel hauler.
  13. Going out wednesday after work. Got 5 or 6 banshees in our group. We camp by the last finger before comp where the vendors used to be. If you guys wanna go on a ride , come by and let us know.
  14. Do I need to run 100+ octane to get the full benefits of advancing the timing? I am running a hemi head with 21 domes, v-force reeds, cylinders are bored to 65 mil, and it was ported. Thanks
×
×
  • Create New...