tt_bansheerida

My images are to large to post pm me if you want to see them

I have a set of 40 mm keihin carbs for sale bored by A&S racing I havnt had the chance to run them yet but going a different route the carbs are currently at tyson racing in MI Asking 400$ come with fuel pump also buyer pays shipping

elka tt front shocks and full flight 2+ 1+ a arms with a durablue sway bar

https://scontent-lga1-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/10425167_10203146892391566_2147284502815513588_n.jpg?oh=a94be466a9425a8acec5a766eb62fd14&oe=5623D0DA https://scontent-lga1-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11204915_10203109156168184_2732220160633697898_n.jpg?oh=4c5b5d60351c4a394c9d2cd77397111a&oe=56228797 https://scontent-lga1-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10421439_10203109157968229_5010978357734296323_n.jpg?oh=fa9674882594aa00c474879a0337cc79&oe=561E55DF https://scontent-lga1-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11329987_10203109159368264_8850518384251454562_n.jpg?oh=3bef1c16fefcf445753c620f20bd191b&oe=561750AF https://scontent-lga1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11067675_10155560412630183_7970027675425118855_n.jpg?oh=8e052ac54ef2cf937236285665450c62&oe=561149FA https://scontent-lga1-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/11150812_10155501788245183_534276590195792357_n.jpg?oh=dd3b3bfc567399fb133fee6881cdf4eb&oe=5654834F

sweet man my 10 mill run great to on the half miles

hey guys i have a 2005 firecat f7 EFI diamond drive im parting out email me with what your looking for snopro66@hotmail.com

would you like to buy them as are or re plated ?

i have 2 sets of cub cylinders a 392 set and a 10 mill set both need to be re plated im interested in trading cylinders and head (hemi head 2) if anyone has a wampus 10 mill cylinders they are looking to sell give me a price or we can trade plus cash if there in great condition

i have 2 sets of cub cylinders a 392 set and a 10 mill set both need to be re plated im interested in trading cylinders and head (hemi head 2) if anyone has a wampus 10 mill cylinders they are looking to sell give me a price or we can trade plus cash if there in great condition

i still do not have a engine together but i might be going there in august and September

nope still in windsor ontario

im looking for lime stone (horse) 1/2 mile tracks with a outlaw class or a class with no engine restrictions im willing to drive 4 hours anyway from Detroit MI

klotz r-50 is my choice i wont ever use anything else

id like to see it

has anyone have there hands on a set of these also im not sure what size of carbs are in the picture if you do have a set can you fit these with in frames it looks very tight in there also clearance for air filters i havent herd of anyone talking about these i found skip condor on facebook if you are a member of this site please i would like all the info i can get about these https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/p206x206/427548_342992925722667_1703853819_n.jpg https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/426929_342993682389258_290624636_n.jpg https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/426721_342992885722671_1620630720_n.jpg

well i all i can say is ask shane hitt on facebook if you have facebook hes been riding pro longer than iv owned quad ask him hes from west virginia hell know of any tt of flat track around you and some or if you would like check out the extreme dirt track racing website its the biggest ama pro and non pro race event on the east coast good luck here is the website http://www.atvriders.com/atvnews/extreme-dirt-track-atv-racing-2013-season-schedule.html

after you change the main jets and pilots you may need to change the position of your clips on the slide needles going down with the clip will allow more fuel in the mid range going towards the top of the needle it will have less fuel through the mid range

will do thanks ! ill have some feed back for you in a bit

i took another stator out to compare this one has 2 yellow wires a green and red so im guessing the one yellow should be the white wire im not sure if it came like this or someone thought they knew what they where doing the one yellow wire was cut and not being used for anything this diagram says there should be 6 wiring coming from the stator i have 7 on this one http://www.dfn.com/agservices/banshwdc.jpg im just confused with this any help will be appreciated

well after some searching around i have not found another stator that looks close to it other than a rickey stator just wondering if anyone else hes seen or used this blue coloured stator

im looking for a rear rim and hub possibly a swing arm let me know what you have

evo x shocks or air shocks i just sold my set of evos

i had mine re programed when i built my engine most shops should be able to do so

sorry what ball joints are you talking about ? the stock black a arms where painted high gloss black with a primer . the blue frame has after market a arms and i already told this to someone the a arms where painted

its not bent i did a sub frame mod to make it feel more like its slammed to the ground but really it still has the same clearance as before