blackedout96

Just as the title says. Need a set of either CPI or Shearer inframes with Silencers. Have to be small bore small flange. Let me know what ya got! Thanks!!

Wish you were closer man, I'd buy those right now!

I am a complete retard and sold the Banshee that I spent countless hours and dollars building. Needless to say it was a bad decision and now it's time to find or build another. As long as the price is right, I am open to anything... could be anything from a completely stock, blown motor Banshee to a full on 10 mill cub. Please respond with everything and anything that you have! Thanks Y'all, hope I find something! - I do Dune/Trail riding so no drag shees

If the description was legit I would have bought that for $650 in a heart-beat! Somebody stole that

These are my auctions... stuff looks like it's going to end up selling pretty cheap and would rather someone from here gets a deal on it than some random fleabayer. Especially if someone needs a cool head or carbs, check it out!! Auctions

Though there might be someone one here that could give me a line on some good parts. Looking for a nice set of reeds, D&D or Black Magic Single pipe, Chip, Trail Clutch kit, Ported Jugs, etc. Just want to mod up this little 600, anyone has any of this or anything else you think I could use, please let me know. Can pay via paypal, check or money order, however you like. Let me know what ya got!!

I think I'm going to leave the chassis together and just sell it ad a roller. If anything changes ill let you know

Leaving the bottom end together... Basically new stock stroke Hot Rods crank, great trans, clutch, stator, everything is perfect. Only flaw you might find is the flywheel. Looks bad, but runs great! Great lower assembly. Any questions please feel free to contact me any time!!!!

Take a look... If there's anything you want please please let me know! Ebay Auctions

Where are you located

PM sent

MSD Ignition - Sold

Bike ran perfect and is EXTREMELY clean... Motor is a fresh .30 over bore stock stroke/stock port with hot rods crank, wiseco pistons and Pro-Design Cool Head. Ran long enough to tune and break-in, that's it. Bike is still fully assembled for the most part, but will be coming apart in the next few days. I will ship everything but the Frame, Tires, Motor and Plastics - Located in Southwest Michigan. Will get pics up tonight! Let me know what you need.... Paypal: [email protected] All Prices Are + Shipping Motor-complete $1,000 (If this doesn't sell quick I will part it) MSD Ignition(complete) $200 Stock Carbs, TORS removed w/ throttle cable and K&N pods $100 Complete J arm front end- arms, shocks, spindles, tie rods and hardware $325 Rear Shock $65 Swingarm(stock) $40 axle-straight with nuts and hubs(stock) $80 Stock Carrier-good bearings $50 Rear Caliper $45 Front Calipers $75 Rear Rotor and Hub $20 Sprocket and Hub $20 Seat- all black w/ newer cover $50 Plastics- Red with ceet graphics $125 Frame- very clean with factory silver finish $150 Also Look Here! EBAY Auctions If there is anything you need but don't see, please pm me and I'll get you pics and a price. Thanks For Looking!!

Are you still looking? What size pods do you need?

I have a good stock stroke crank if you're still lookin pm me

Got it traded guys. Got a mostly stock but solid shee with a fresh top and bottom end. Does have tors elim. and cool head but that's it. Port, pipes and ext swinger will come soon... Can't Wait!!

LOL! Just saw your post... Man if you were closer I'd do it in a heart-beat. I'm willing to drive a bit, but 1800 miles is a bit much. haha Is that my old bumper on there!?

Looking to trade my CR250 for another Banshee... Bike is near mint with tons of upgrades and only approx. 6 hours on new hotrods crank and wiseco piston\rings. Has FMF Gnarly pipe w/ shorty silencer, Factory connection suspension front and rear, V force reeds, Pro Taper bars, etc. Will also come with a brand new set of tires, tubes, service manual and whatever else I have laying around for it. Let me know if you'd like to see more pics. Bike is located in southwest Michigan... Please let me know what you have if interested!

I have someone interested in the whole setup. If that falls apart, ill get back with you

Someone emailed me earlier for pictures of the wiring harness... I can't access my work email from home and can't rememer your screen name. If you see this, please message me on here and I'll get it sent right away. The gas tank is off of an '05.... petcock is gone, not sure if that makes a difference to you or not. I'll get the pictures of the brake hub over asap! Sorry for the delay, haven't been on in a few days....

Just have a few things left to get rid of... -Complete wiring harness from '05. Still has all plugs, key switch, key and kill switch... $50 + shipping -Sparky universal spark arrestors.... $80 + shipping ($160 new) -Rotor and hub.... $20 + shipping -Sprocket and hub.... $20 + shipping -Kicker gear assembly.... $20 + shipping (I have 2, both in good shape) I have a few other things laying around as well. Radiator, gas tank, stock pegs & heel guards, steering stem... Let me know what you might need and I'll see if I have it. Thanks!

Found a few pictures of this place on another site.... Looks like a great place to break some bones! http://www.greatlakes4x4.com/album.php?albumid=905

Cases are sold.... sorry I am just now posting that