steeler2169
-
Posts
124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by steeler2169
-
so its not me
-
me and my friend were talking about the nose of the bike when you jump if its down do you give it gas or rear brake. And I have a problem every time I jump me feet come off the pegs and I scrape the shit out of my ankles any suggestions.Dont laugh at me im trying to keep my teeth
-
thnx ill try it
-
the 25 is in but bought the 27.5. so try screw first then pilot
-
elev. 880, K&N air Filter is it
-
i put in 240 jet & k&n air filter. when i started it didnt smoke so that tells me not enough fuel. it wont stay running. so do i need to move clip to 4
-
thnx ill advise him of this. he has a friend that has it on and thanks its the best thing
-
my friend keeps say get a boost bottle. what do you guys thinks
-
Ok thnx ill try it
-
tonight im putting in a 240 main 27.5 pilot k&N air filter no air box lid. My Q is what do you think i should set my needle at and the air box screws at. alt is 880 iride trails and some motor cross. no other mods
-
today i messed with the air box screws it help alittle but it didnt come up on the power band as quick
-
she boggs qt throttle & idle stalling. I was riding behind my daughter last night and stalled like 5 times, because she was going slow, but its not a clutch stall.
-
nothing holes in air box lol
-
so im rejetting tom. main jet is 220 pilot jet 25 needle at 3. altitude is around 900 trail ride and sometimes track ride when i get bored. prev. owner cut holes in air box lid w/ stock filter. So my q is what would be good jets. One more where should i set air box screws after jetting.
-
I havent check the jet sizes, needle clip i think it 3, elev. 850
-
what size jetts would you suggest i live in ohio. Go uo 2 sizes
-
the shee is bogging at quarter throttle. Ive adjusted the air box screws not much improvement, the carbs are in sync. The prev. owner drilled holes in the air box lid, it still has org. filter. Could this be the prob. or do i need to jet? Everything is stock.PLZ help its bugging me
-
Ok ill check them out thnx
-
what can i do to get more low end power? Every thing is stock right now, the kicker is low on money. The shee is a little doggish in 2nd until power band.I ride mainly trails and some motor cross tracks
-
quick q about air screws on carbs
steeler2169 replied to steeler2169's topic in General Banshee Discussion
ok thats the ones there the stock carbs thnx -
are the air screws little brass screws or the big silver knobs on top of the carbs the air box screws
-
ok ive got another Q about the air screw there are two right on each carb. do iturn them toward the back or the front of the bike
-
Thnx for the prompt response.Ill Give it a whirl
-
Ive recently bought an 05 shee, my elevation is around 800. My Q is would a 240 jet help with low end throttle? Its also kind of hard to start. Everything is stock. The next Q is removing the air box cover with the stock filter in it for now. Will it help? Im going to get k&N filter here soon. One more Q where can I get a service manuel on the shee