dragbanshee98

hey i am very intersted in this shee. if you could get me a list of the mods on the bike and # of hours or miles estimate that is on the bike, along with what kind of fuel you are running, and what extras ur throwing in the deal there is a good chance that i can take it off your hands for ya... let me know

dirt drags, mx track, woods track, large mud pit, final event of the series!!! all are welcome to attend... near Harrisville NY at the adirondack atv club... on site camping... will post morte info when i get the flyer... any questions feel free to ask me

i was looking into getting a speedometer combo from trail tech. anyone know if these are any good? are they at all accurate? if i could get some different opinions on here that would be great

the flyers should now be finished by the end of the week, will post it within next 2-3 days, if you have any questions i can answer them on this site...

ya i was not able to get a hold of a flyer but it will be at the adirondack atv riders club location, you can visit their website and get the location info... http://www.adirondackatv.org/ there is a campsite on location and that is the only lodging in the area that i know of... there is a 5-10 dollar price of admission, that only gets you in the gate! there will be another 5 dollar charge for every class that you enter.... there are currently going to be NO PAYOUTS FOR ANY CLASS!!! we will start payouts next season for the next years tour... if you need any more info let me know...

i will have more info when the flyer is completed... should have it by sunday

this event will be at the atv club just outside of Harrisville, NY. there will be dirt drags for atv's and dirtbikes, mx races for both along with a woods track for both. there will also be a large mud bog. WILL POST MORE INFO WHEN FINAL FLYER IS COMPLETED!

where in the hell do i find this fusin stuff... willing to pay good money if it will give that much power...

it has not been ported, and i assume it is jetted right, but not sure.. it only has three tramks through the new wiseco pistons that have been bored over 20 thounsandths, and would that do this problem because the pistons are really tight???

i have had the entire engine apart and nothing is leaking or anything... the carbs are clean... reeds are new... and the jetting is spot on... it runs awesome in higher rpm's... but on the bottom it bogs real bad... then takes off really hard... idk... someone HELP!!!! please

i bought a banshee about a week ago... it has a few mods and new pistons, pipe and clutch. there are about 3 tanks through the motor... does not want to rev up like i think it should... tryed draggin it and on take off unless i revved it to the moon, it would hesitate real bad through every gear, but if i kept it revved up, it outran every other wheeler that i came up against... would this be because the motor is new and the pistons are still really tight??? not sure what the problem is... HELP!!!

thanks man, ill try to get a hold of a few of them... i need to do something to the shee cause im gettin beat by 2-3 wheeler lengths in 300 ft... hopefully that will help... i have also heard about shaving the flywheel?!? what does this do and is it worth the mod??? if i could get a few different opinions bout this that would be nice because i know nothing about theis mod

where should i go to get an override tranny? i race 300ft sand drags and dont know what would be the best gear # to get? i was thinking a 4 but was not sure... any help would be nice

ya thats what i want to know, where can i get one and how much do they cost???

hmm that sucks, i thought about gettin one, but not if tis gonna be that hard to set up. where did u get it from???

if one of the machines is suspicious of being out of class, it is tore down and looked over... it sucks real bad to have it happen cause it takes you out of the rest of the class and maybe even the next, i have had it happen wheni tryed to get my mod raptor into the bolt on class... it can and does happen alot... the series that i am in is very strict about people cutting corners with the rules.... any other help that people can give me on simple mods to gain ground on the big dogs would help alot

what is a mr fusion kit? where do i find one of these??? the open mod class has no limits other than no porting is allowed, and the stock frame must still be used, other than that, there are really no limits... would it worthwhile to get a mod tranny, and can i do it for under 1000 dollars???

just got a 98 banshee few days ago. has wiseco pistons bored 20 thousandths over, cpi inframe pipes with silencers, v force 2 reeds, +4 swingarm, new clutch, k&n single air filter, and 10 paddle hauler tires. alkl else is stock... need help on what to do for mods next... not looking to spend alot of money, but looking to run with the open mod drag classes... appreciate any help i can get