mofoka

Or does anyone have an idea for different springs? Progressives or 2 stage?

Can anyone lend a hand? I weigh 195lbs and was thinking about buying a stiffer spring from Eibach. I'm pretty aggressive but I don't want too stiff. I'm running a stock shock and swinger. I was thinking around a 6.7 but I'm taking a stab in the dark. 891.0063.1 56x56x230 mm 6.3 891.0067.1 56x56x230 mm 6.7 891.0072.1 56x56x230 mm 7.2 891.0076.1 56x56x230 mm 7.6 Thanks again!!

Offer sent by PM

Rear Shock PM'd

How much to send it to Calgary, Canada? T3J2N9

What condition is the rear shock and caliper in? Is the shock modified?

How much for the rear shock and rear brake caliper?

Fixed my carb issue and took it for a rip around the block. When I slammed on the brakes my bud saw it squirt out the back. Now if I just press the brake jently it will leak. So, should I just take the block off .. off and put some gasket maker around? Or do I need to fix the caliper?

Yeah, it was fine there. It ended up that in the 'Y' the one cable slipped off and wasn't pulling. I can't believe I've been running it for so long like that. I've make shifted back for now until I buy a new cable. Seriously, how was that possible...? Oh well, it is twice as good now!

I'm axing mine because the fuel line into the carb maintains a huge air pocket due to the bottle pushing the hose higher than the petcock spout. And cause everybody says it's sh!t so I'll try it without.

Payment sent. Details sent by PM THANKS!

How much for a white one to Calgary AB, Canada? T3J2N9 12...?

Sorry Found it local... THANKS ANYWAYS!

I will definately be looking into getting the TORS removed kit. Does anyone know what might be causing the one carb slider malfunction so I can fix it for the meanwhile? Do I tear into the tors? Is there an easy fix to get it working again?

I don't know, You tell me. I'm pretty sure it's important. I've checked ebay and nothing. What is that a picture of? A torn boot?

..... I thought it was the Float... it is the cylinder that you see by looking in the carb from the air box. When I push the throttle it moves up on the right side but not the left.

Okay I'll give it a try. Here is the forum page I just added. http://www.bansheehq.com/forums/index.php?showtopic=98240 Thanks for the advice.

I'm taking off the boost bottle because it is SH!T.... anyone have a stock cross over tube that would take care of that???? HOOK ME UP!

..... I thought it was the Float... The cylinder that you see by looking in the carb from the air box. When I push the throttle it moves up on the right side but not the left.

I've got a boost bottle tapped into my carb boots and I want it gone! How do I get rid of it? Shouldn't there be a stock tube or something???? Or can I just plug those two holes. I was going to leave it but my fuel line is pushed up by it and I can't completely git rid of the air bubble.

One float is not moving when I push the throttle. I have stock carbs with TORS. I can move the float with a screwdriver so it isn't stuck.... Any idea's on how to get it going again? Do I need to open up the TORS system?

Okay, I sprayed the carb cleaner and it got it running as good as before. But I noticed only one float is moving.... WTF The cable looks good and I have stock TORS still. I can move the float with a screwdriver and it feels as good as the other one but it just doesn't move by pulling the throttle! Any ideas?

According to the manual they are called the upper and lower rear weel hub bolts

I'm also getting a spark plug wrench. I think it is 13/16" can someone confirm that too?