Natemills8
-
Posts
300 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Natemills8
-
I need a good full transmission with shift forks
-
How much do you want for it? is it the whole motor or just the top end?
-
I got a set, the top as a hole in it behind the left side where the cylinder goes on at from a broken rod.
-
Trade Banshee Parts for Paintball guns and gear
Natemills8 replied to ellison445's topic in Swap and Trade
What kinda sand tires do you have? -
Have you still got the Cylinders?
-
320 Main is all youll need
-
If its just the gears there not much
-
If you have a lock up clutch it will make it pull forward some 2 My bike did it after we put a new clutch basket clutchs & lock up in it
-
I ran mine on +7 but my bike was stock so you might not have to have as much
-
is it a strut of a shock? if its a shock the lowering linkage will work you can get them on ebay if its a strut but get some square tubing & cut it how long you need it & drill your holes in it for a bolts
-
Looking for a clean uncut stock airbox lid and filter cage.
Natemills8 replied to J. Allen's topic in Wanted
So you need a air box top & the aif filter cage? -
I need a left cylinder unported or lightly ported, flywheel, a 4 mil crank thats not been used any or very little.
-
No in 200ft it ran a 3.72 with my dad on it & it was runnin3.9 with me & im alittle south of 300lbs
-
Bore 20 over shaved head Shaved Trans little port work alky vitos t&w stock crank
-
Mine done the same thing but it didnt do it til the chain broke goin down the track
-
A stock frame is a stock frame J-Arm Or A-Arm Their Gonna weight about the same
-
I ran a 14 front 40 rear drag racing in 200 ft & I was gettin 5th gear at the line & running 3.9s
-
All you will have to have in powerjets & your main jet drilled out but when you get the powerjets make sure you get the adjustable kind not the kind you have to put the jets in.
-
Id use 927 Koltz will turn the in side or your cylinders yellow .. well benol will at least I was usein benol till I saw was it was doin to my motor & switched to 927 & it cleaned my pistons up in about 3 races
-
I got just about everything you need I got Grand River Drag Pipes one out each side +8 swinger & 34mm alky carbs with adjustable powerjets everything came off my bike that blow up last saterday it was just bored .20 over & ran a 3.72