dirtydownunder

whos banshee eater ?

testing lead to lead with no plugs caps gives me 5.8ohms. i tested my mates coil and that was exactly the same, as well as the mixed polarity wiring to the coil. (both 08 banshee's) im running outa things , trying to find a dyna coil, but as my work is closed on holidays i cant get it delivered. thanx guys.

i have two different multimeters and they both read the same (both digital, one is autorange auto that n this and the other is manual and is only .4ohm when wires r crossed.) with testing lead to lead i get 16.01ohms with testing lead to neg on coil i get nothing with testing - + of coil it flickers from .5 to .9 ohms thanx.

hey!, i was tuning the bike and could not shake this hestitation at high gear, low speed, wot and mid rpm (before it gets on the pipe) it felt like ignition but i thought i was there and should try jetting anyway. so i went from 155main and all the clip position to 158 and 152 mains. the bike takes off awesome if you go 1,2,3,4,5,6 and is great when your on the pipe but say you cruising and hit some boggy sand and go wot (high engine load situation) it sorta misses and hesitates (doesnt backfire or pop), enough for me to get off the throttle asap. tests came back coil primary .5 - .9 (.28 - .38) factory ohms coil secondary O/C- O/C ( 4,700 - 7100) factory ohms coil plug 5.19 ohms coil plug and lead 5.22 ohms pickup coil 117 (94-140) factory ohms pickup gap .19 thou charging coil 18 (13.7 - 20.5) factory ohms spark plug gap .6mm so it appears to be the coil, and whats worse is that it was wired up backwards from the dealership !! that may have caused its short life, it also sucks that im trying to tune a new setup with this happening. i did a plug chop to see what its burning like but when i took off 1,2,3,4 i had to stop so i pulled clutch/shut off and did it again (on the same new plugs). ( due to loose dirt it did not take long to get though the gears so not much engine load) chop was done on 155mains clip in middle position on oko 30s avgas/94 mix what is a good coil to get ?? and does 141/141psi comp on 20 cc domes, ASL with dune/play port sound normal ? thanx guys.

its a shit job haha i dred it everytime. If its really dirty i remove all the plastics and give it a good clean with a brush and soapy water then test drive it dry. if its not that dirty i just get the not so hi pressure cleaner, stand back and spray. a full clean can take upto 3 bloody hours make shaw you dry all your stuff because it will rust other wise, thats why i test ride them dry.

yeh, stick with the sponsors, you're safe with them. sorry i didnt write it in capslock

ive always used his e-bay store.

welcome, to this humble abode , if you need anything its here. post some pics up of ya banshee's and maybe some hot g/f's haha j/k.

brandon helped a brother out, answered my questions and sent the part out and shipping was cheeeeap !! thanx man !

they seem to talk alot ! and offer this mod aswell : i hope their porting isnt like that.

i prolly wouldnt have thrown her out, even tho how fun it would have been to do. shes in debt to ya, use that, if she doesnt comply then throw her ass out

that double sided tape used to be straight !

send wicked arms a message on ebay, he has to make the arms up anyway, he might not even charge more to move the mount.

just got some stuff from chariot, i am very happy with the machine work and their price's are great.

man, you need to flush that cooling system !!!! you could give the cylinders a bit of a clean up, theres quite a bit of sleeve showing through the ports, the sleeve even looks twisted ? you dont have to use premix, normal gas is fine but a bit ovekill, id just use degreaser and make shaw the dome side of it is spotless. if the domes dont have numbers on them, get a syringe with cc/ml on the side and insert a spark plug into the dome and use the syringe to squirt fluid into the dome (counting how many cc's go in) you need something flat with a hole in it so you can put it over the dome and squirt through the hole into the dome. you could even use the clear cd that comes on top of the cdrw stacks.

glad you stuck with it, and worked it all out. it looks heaps better with the banshee fenders, those raptor ones are horrible, even on a raptor.

240 is lean, even lean with the airbox and lid, are you running the airbox with lid ?

dammit !!!, im a beanie wearer from way back.

haha did it even happen, or did your mates dress up and get fake camera's and mic's, is your name even shogs ?, do you even have a banshee

there could be a surprise in there, but doubt it being that it has stock pipes and stock everything.

ordered some parts and Jeff shipped them out , fast and a great price. will buy from again !

but i though you guys said................. haha , all shits n giggles man.