Keyser Soze

ttt

ttt...got a few pms but everyone is really far away....would be willing to drive a reasonable distance.....

CGR where do you ride. I will be there will my crew as well. Your going to want to bring your camera if you have never seen a 250lb man free style on his banshee. Ive heard this place is kind of lame so I will be bringing materials to build some pretty basic jumps.

Banshee is ready for the trails. Extra's include; Toomey t-3 pipes, pro flow adapter w/moose foam filter, tors removed, boyesen carbon fiber reeds with reed spacers, brand new tusk clutch, has been ported. I'm not sure on who did the port work but the bike has a ton of low end, Roost boost ignition ignitor!!! Razor II's are 70%+ Imperfections include; Various chipped areas of powder coat, small oil leak from bottom case. $1200....may consider trades for a automatic.

Last year we had a couple of HQ trips....15+ http://www.youtube.com/watch?v=kWwXtcj3Elg

I'll give you your asking price...consider it sold

Cover has some brake rash and one tiny flaw in the powder. You can see both in pictures. I will also include the seal for the kicker, water pump bearing, impeller and shaft, water pump seal. Will come disassembled so you can inspect the bearing, and seal. Everything was in working order when taken apart. Looks much better in person than in pictures.....$50 shipped. Located in Indiana.

I just completed my little pc setup.....gun from Harbor freight....85 bucks..came with a few pounds of powder....sand blasting cabinet $100 bucks.....$40 for an oven....and $30 for the 220 outlet. Ive already pced enough parts to make it worth it. I started off using a toaster oven and had zero problems....

Dammit travis!!! beat me to it.

$13

Does that come with pistons and domes?

What is that thing..Is that even a banshee?

Just started coating yesterday. So far I have done a kicker, head, jugs. What wondering how the rear caliper wold hold up to 300 degrees. Also curious if the master cylinder could be coated.

thanks

Been awhile since I have seen a stock head. I dont remember how much material is between the head/dome. I bought this at LS off a 9 year old kid. He told me it was not milled. I was going to go .20 but it looks like it may have already been cut......here is a pic http://www.flickr.com/photos/34019197@N02/5115857470/

SOLD!

5DP39 needle is right in the middle. I dont know what you mean by nozzle.

I couldnt find any numbers on the slides. Looked everywhere.

5DP39 350 main jet stock slides

I picked up the nut for the carb today. For $120 Ill include a set of Uni dual stage filters....For $50 you can get f@$#%ed

One side is missing choke lever, and I lost the little lock that locks the throttle cabel..I went without it never had any trouble. These carbs were a big improvement over stock. I am located in Indiana...$100 shipped

Cylinders sold late last night

Modquad cool head comes with 18cc domes, O-rings are still on it but I would replace. There are some scratches on top from removing plugs. $125 shipped 28mm flatsides were an awesome upgrade to my trail ported bike. One is missing the lock nut on the cap. The choke lever is missing on the right one, I just pulled it up with my fingers. $125 shipped. Trail ported cylinders at .30 over. I was told they were done by a guy in Terra Haute Indiana. Bike ran awesome with em. Had an air leak and burnt em up. They need bored .20...may be able to get away with .10 $125 Shipped. All items are located in central indiana. HEAD http://www.flickr.com/photos/34019197@N02/5094095563/ http://www.flickr.com/photos/34019197@N02/5094001847/ http://www.flickr.com/photos/34019197@N02/5094002483/ CARBS http://www.flickr.com/photos/34019197@N02/3380926806/ OLD PIC OF CLYINDERS http://www.flickr.com/photos/34019197@N02/4414892619/

Roasted my top end in the middle of the day on thursday. M&M hooked me up with ported jugs with fresh bore, new pistons, complete gasket set for a hellva deal. Changed everything in the parking lot and was riding on friday. I'm not the type to spend 1,000's on banshee parts...not a high end customer or anything, but M&M earned my business