Mootsman

It wasn't so much the size of the wrench that impressed me, but rather how much wrench I got for $24.00

I don't like using pipe wrenches to tighten axle nuts because of the gouges they leave in the surface. So, I went to Harbor Freight today and picked up a very large crescent wrench. It's on sale right now for $29.99 and if you take a 20% off coupon, its only $24.00. Good news is that it will work on aftermarket and stockers. Actual size shown below and yes my tool IS REALLY THAT BIG - 24" TO BE EXACT. Now go get you one and quit tearing up axle nuts.

Found me one! Thanks guys Shawn

Bump...my stock swinger isn't cutting it.

Looking for a +2 roundhouse swinger with carrier and good bearings. Let me know what you have! Thanks Shawn

Price on the +4 swinger and who makes it? Thanks.

I would be honest with yourself about exactly what you want to do with the bike (riding style, terrain, etc) and that will tell you where to spend your money.

How well it holds up to heat will depend on how the surface is prepped and what type of powder you use. I use hi temp powders for exhaust components and haven't had any fade or peeling. I have used standard TGIC polyesters on brake calipers and banshee jugs and they look as good as the day I coated them. Cast aluminum parts should always be preheated to allow oil, air and other contaminants to escape from the metal in preparation for coating.

Ok. I'm interested if its in really nice shape.

How's the polish job on that dog bone? Looks like a lot of scratches on that pic. Any rust on the Chrome plated connector? Thanks

Will you be selling that kick starter?

Yeah, I sourced the clutch cover, but I still need the domes.

Sent you a pm about those 21 cc domes.

Need a couple of domes for my cool head and a stock clutch lever. Let me know what you got. Thanks Shawn

How do those tank covers attach?

Are those fattys or golds?

Interested in the pipes and silencers. Toomey T-5's? Also, the rear grab bar if it is aftermarket.

Still need those extended brake lines. Nastyracing, get back to me if you still have some available. Thanks

Parts acquired. Thanks quadpro.

Sounds good. Paypal?

Bump

I don't need an outer pressure plate though.

That's right...previous owner sheared an ear off the stock basket...and broke a post off the inner hub..

Looking for a stock clutch housing (don't know if I can reuse my gear) and a clutch boss (inner pressure plate). Let me know what you got and how much. Thanks Shawn

Interested in those a-arms if they are +2+1...also some extended brake lines and the tie rods.