lowbuckracing

Austin,donate that to the lowbuckracing fund...I will send you some stickers..Lol..That swinger is sick..

Jorge and I talked for 20 minutes discussing some ideas for the hq build seat embroidery..I know he does great work for our company and will do a sweet job on the hq build.He wants art work for the side of the seat and the rear of the seat.He also is asking about making custom shock covers so the designs will flow.If you need any personalized stuff done also give him a pm,Jorge asked that the hq members draw up something custom and see what he can do..If you got some skills let some some simple yet cool designs..Thanks guys,Lowbuckracing!

Dont know what is going on at the moment...Tryed to cal also and no reply..Hope everything is ok....

Kevins #760-815-1316,Tell him Lowbuck sent you.....He will answer all your questions and if you live in Sandiego your right around the corner..Look up some of theire port work on herrjugsracing.com,He has greart customer service and will back up his work. Thanks,Lowbuckracing!

NYUK,,,,,Thanks for the kickdown again!!!!!!..Gonna put you down for some yoda time.. :thumbsup:

I will personally take your jugs to hjr or herrjugsracing.If you want them ported, kev does a great job.I live in Banning and will meet you on the 10,Im always going to Escindido and would drop them off for you..Go to herrjugsracing.com or just ask around..Pm me if interested..Kevin is also a member here on the hq.!There are also a few other good motor guys that are also members here and do great work!

LOL :yelrotflmao:

Kev does great work..He is also should be able to tell you the exact jetting you should run on his port.Oh yeah,when you get it all back togother you better hold on tight!!LOL..Call em..Lowbuckracing!

If your not confortable you aint flying over shit...Now with the thumb we can rock and roll...pm me when you make a trip to Glamis..Looks as if you are a dunner also!,Lowbuckracing!

I thought I wanted a twist,went to Glamis one time and felt like a kid trying to ride for the first time again..Thumb for me!Twist is unforgiving over heavy bumps and woops...Guess it depends on your ridding to..I will be selling the twist setup pretty soon unless I trade the bike with it on..Hit me up if you havent bought one yet..

Where did you find a black alligator and how did you make him stay still while you put that puller on him?

ttt

They have to be just right...The best way to adjust is get a purge bottle you can hang and connect to your carb withit off,with a two way valve .Instead of putting on the carb evey time...Check to see if your air scews are the same..Turn them all the way closed,then 1.5 turns out on both..

There is a overflow tube that is supposed to run between the frame and the swinger..The reason it is pouring out is because you need to clean the carb bowls out..Your floats are sticking...Its pretty easy..Just take the carb off,un screw the four screw on the bottom of the carb and pull the slider pin out from the float and be carful not to lose the pieces in the spring return area....get some carb cleaner and make sure it all looks bling bling..No green..Mine as well clean main jet and pilot while your there..Good luck,lowbuckracing

If its sputtering out then your not getting enough fuel,you add numbers for bigger jetting.Depending on how accesable jets are I would go 10 first then 5 if you need to still do it..General rule is to always start high then work your way back down...but if your close then just add 10 and see what happens.It would really help to know if there was any motor work done also..You should do a compression check to make sure you that your running the proper octane for the build...

I need thoseA-arm bolts for the hq build..any partial trades on tickets..let me know

Got a polished stator cover..If so how much?shipped to 92220..Thanks..Lowbuckracing

Did you clean out both jets on each carb?just checkin..If so you will prolly need to get bigger mains..let us know...

sounds like the main is clogged on one side,try to switch plug wires to eliminate the coil or a wire being bad....let us know

Hey Pete,Lowbuckracing here..Are you running the 2 into 1 set up I sold you?If so switch the carb out with yours and see if thats it..If it is send me the carb and I will upgrade that one ..Let me know,Thanks..JB

Dam...Wish 'I Had some cash..Killer deals!

impact...works for me...

Still forsale!

We are gettin to the point were I need all the parts for the HQ Build...I need to start getting everything prepped for Paint,assembly, PC, Chromers,Embroidery,etc.If you still have parts lying around take a lil time and please send them off.Thanks to everyone so far..The frame is awesome and Im sure the rest will follow suit.Pm me if you cant ship what you said and I can repost for that item..no names will be disclosed and no explanations needed..just need to keep parts list updated.!Also if anyone wants to buy tickets for the raffle,make sure your a premi member and send money to [email protected] - then pm me and I will ship tickets asap. Thanks for all your help and hard work guys..Lowbuckracing!!! Ship to: Lowbuckracing 315 Santa Rita Place Banning Ca 92220 cell # for any?951-823-3175 JB