BOWTIEKV23

I got a good deal on a set of sleeves and heads. as of right now i have a set of sleeves put in the heads and forged pistons from vitos it is at 68mm. i was looking to get a port job done on the heads if it is worth it seeing that ive read that people say you can not do too much with the fact of how small the transfers are. Primary Use is Aggressive Trail, Little MX Fun, All around i would say more of a play toy. So all in all my question is can i get some opinions in which direction i should go. What Pipes? What Carbs? 30mm? Would a 4mil crank be a good idea? Play Port? From Which Machinist? Any opinions would be greatly appreciated just trying to get some ideas

stock cylinders* for dune* or agressive play* maybe what he means haha

hell i just joined about a month ago, dont ahve many posts but i have a stock crank big bore 68mm and would be willing to buy a set of these if you can sell these discounted price to us. i dont mind paying and testing once i get my setup on a dyno that is local

anyone have an opinion if these these would be a good idea for my 68mm big bore stk crank bike. its just a basically standard port match as far as the sleeve to the stock cylinder. its basically a fun bike that i take to mx tracks but usually arent real tight tracks.

do you have any idea wht you want for the plastics i dont know off the top of my head what they go for. pics?

if you dont mind just asking for a price you have in mind, i dont want to lowball you on it. thanks kevin

how much for the gibson arms

well im glad im not the only one that enjoyed it.

Probably not posted in the right place but this is funny. http://philadelphia.craigslist.org/mcy/576993035.html

This may have been answered before but could use some help on this any opinions would help. This is a fun/trail/mx used shee. Its a 68mm setup using the stock crank. What size carbs should i use ive been told 34s and as little as stock. just want to get a nice tune out of it not looking for insane power just to run nicely. Thanks Kevin

its more fun/mx/trail. i just didnt think i could get the stockers to flow enough.

i have a 68mm big bore and probably going to be putting DMC Aliens on. what carbs should i use? thanks for any help that can be provided.

well im about an hour and a half away from you so if you give me a good enough deal then ill buy and come pick them up.

do you have an approximate of what you want?

what would i have to do to obtain a title

Has anyone used this kit? What carbs are best to use for it 28mm 30mm? 2 into 1? Do you have to use the pistons from prox/LA Sleeve?

a decent amount

Title says it all

using airplane fuel may not be a good idea. some have additives for cooling ultralights. just my .02.

Sale Pending :biggrin:

very interested, in pa. is it still available?

hey hows it going, im interested. so this does have a clear title?