tundish2800

ttt........... This is light than stock. Made from chromemoly.

http://www.youtube.com/watch?v=bq9993iJlYU

Comes with bars. All chrome is in good shape.175 shipped to your door

IS the carrier 35mm if so ill take it pm me and let me know thanks.

I have a stock steering stem if you need one pm me.

your killin me smalls Looks good makes mine look stock

Dam had a good deal on one. Savage love the avatar

Can you use a yfz 450 axle on a banshee?

I have the allozbolts stainless as well i don't get my bike dirty i only sand drag and dune ride on occasion. But its a clean look and the head won't strip out on them.

Get through this and you can have it. I have a 12 gauge that keeps a look out too. I live in a good neighborhood but there is always a few bad apples around. I just keep my truck blocking the driveway so no bikes can go between the house. If they try to lift it over the fence my room is right there. I live with my sister and she saw a guy run through our backyard one time and the cops were there in less than 3 minutes. The street behind me is a fire route and there is always cops on it.

rdz and ggr pipes are loud as hell. Both of these pipes are louder than cpi or shearers.

I would make the guy fix your frame and pay to have it recoated.You should not have to change your setup because of his fuck up. just my .02

I ran 14/41 on a stock cylinder 4mil. The bike weighs 350 and i weigh 245 i was running 4.83@68mph spinning the whole way down the track. I only had ten paddles on last year this year i have 12 paddles.

x3

I ran the ones from lowes and never had a kink in them. Just have to cut them to the right length. I just change them every year for a little insurance. It would cost you like 7 bucks at lowes instead of a 110 for the aftermarket ones.Just make sure you get the ones that have the thread through them.

I HAVE ONE ALSO

Just go to home depot and get the clear ones. It would cost you like 7 bucks for all of them. Just use the stock one that goes to the back of the head( the one that goes between the intakes).

Pipes are sold

Sorry i just got a set of chrome drag arms.

Cpi inframes come with fmf silencers. 375 shipped to your door. Add3% if using paypal.

I would start out with the stock gearing. That way you can figure out what you like. On my dune bike i ran stock gearing and it ran great.

I go a couple times a year, The noise check is hit or miss. Some weekends they check everyone some weekends they don't check anybody. Make sure you have sparkies they will check for those. They have a long stick they will put in your exhaust. Put your orv sticker where they can see it that will stop them from stopping you to look for it and any other problems they feel like starting. One more thing STAY OFF the THROTTLE when you are pulling up to the check station. That is one thing that will help you not get stopped.

How bout this pic for you http://t0.gstatic.com/images?q=tbn:eeicRKPha4ksxM:http://www.bl4nk.com/imgs/kb/kari_byron_shark_bikini_radio_belly_800x600.jpg

I have a half of banshee, It is getting redone over winter. My girl has a raptor350. But it's good little bike but no power like a shee.