Duneman101

so then tell me where the fluid went??? it didn't evaporate and it didn't leak out and as far as i know, none of it escaped through the overflow.

what kind of paint did you use? brand? spray can or paint gun? did you clear coat?

i just did my frame and Aarms with the bedliner... it looks real good so far, i have a pic of it in my avatar... i did 4 coats and it is tough shit... just takes for ever to full cure and harden... i painted the frame and started let it dry for an hour or two then i started fiddling with it because it was dry but had a rubbery feel to it and the stuff pretty much scraped off with my finger nail... so i touched it up and was pissed and left the whole thing alone for a couple days and it is hard as nails now.... i started scraping and it takes a pretty good scrape to take it off.... click here

i have one in my 250R, it's been in there for 2 1/2 years or so and seems fine, i pulled the cyl and looked for wear or cracks and there were none to be found.

i have seen a couple of warrior frames with ninja motors in them that seemed to fit pretty decent... i don't even remember seeing any frame cuts, just some custom motor mounts... i would also recomend not using a ninja, unless you just have one sitting around with a great motor wrecked frame... find something like a gsxr or fj1200

i am pretty sure they work... i was heating up pretty bad out in the dunes and noticed the bottle was full, so i pussyfooted it back to camp and by the time i got back it had gone down to half full, then after it sat for a while back at camp it emptied completley... well worth it in my opinion... that would have been 20 or so ounces of coolant my bike needed in the sand instead of the cooling jackets.

That was funny.... Are you able to cut custom grills if i have a design in mind or on paper... i think it's something that would be a good seller too.

i think that money/value wise you will end up on top... would he get pissed if you turned around and sold it, then put the cash towards another banshee that will beat the one you just traded him?

there are some factors that need to be taken into account... temperature humidity coat thickness was the paint area well ventilated stuff like that... usually a couple hours is sufficient if the temp is warm enough (70's 80's) and the humidity is low....

He is a member over on E2S.... he seemed like a pretty good guy and was real helpful... he's been trying to get his name out there.

I don't get hangovers luckily due to a great number of drunks in my family, i guess i have mutated or something, but my ex used to get them real bad. We found these pills called chasers and she would just take them before drinking and would never get a hangover if she did. found em at like walgreens for like 6 bucks a bottle.... also stay away from sugary stuff like cheer leader beer, daquiri's, and themed martini's. Also if your hittin hard liquor try to stay with similar kinds for instance if your drinking Crown Royal, stick with it or some other kind of canadian whiskey.... there are different sugars in adult beverages that when digested cause toxins...

Bought the crank and all i can say is WOW.... Great shape and he mailed it same day as i paid for it.... BUMPITY BUMP for great seller B_SANDGREN

how much for the crank? also looking at the timing plate.... shipped to 84015

i am looking for pipes, axle and rear end.... pm or email me some pics...

I am newer to the site and i have most of a banshee on it's way thanks to SKMUP, but i am in need of a few more parts. if anyone has some or all of these let me know. Crank stock or 4 mil Pipes prefereably CPI, T5, or T3 Full rear end axle, carrier, brake rotor hub, brake rotor, sprocket hub, wheel hubs

i ride with few of the guys that build these and ride with a few guys that have bought them and there have never been any complaints... and they are solid and light weight.

pm sent

Are you willing to ship it?