samc

it says on the website, free bearing, im doing all the work so thats not a problem.

whos the cheapest on the net to have it done by can you guys give me some website links? -Thanks

okay thanks! you think thats the best place to buy wiseco piston kits?

lol why would they laugh at you? if they wanted to promote there company thats what they would do is give a discount code to banshee hq members. thanks for the link ill deff going to be looking into the wiseco piston kits. :biggrin: thanks again!

thanks, yeah im trying to save as much money as possible... magic looks like they got good prices, do they give discounts out to banshee hq members? if so ill order all my parts i need for my shee there.

i cant find the magic website... i never heard of them before.

my pistons are still good, my dealer told me they have alot of ring gap in the rings, he told me if i wanted i can still run the same pistons it will be cheaper but by the time i order rings and all i could of ordered these pistons as listed. thanks everyone for there support on this topic

i had some guy tell me like 85 bucks or something? thats a rip

my engine is going to be pretty stock, just pipes, reeds, boost bottle and filter.

pm me

where did you get your "knock off" kehin carbs and how much..

how much am i looking to spend on shaving the head, and whats the best company to go with? as cheap as possible and fast service?

yeah i wanna run them but if they really suck i dont want to waste my cash, jeremy on sport atv central said they suck because the piston skirts break easy

http://cgi.ebay.com/ebaymotors/Banshee-Nam...VQQcmdZViewItem i know everyone is going to say wiseco, pro-x.. i just want to see everyones oppion on these products the feedback.

try running engine ice, stuff works good cools your bike down fast

shee rips - where did you get your head shaved for $30 at? lmk im deff going to get it done for that. . (dude above me)- thanks, im dont really want to spend the money for a port job inless i can find somebody that will do it for really cheap (decent job), im going to look into that timing plate. does that mess with the jetting at all? when i checked my carbs i had a 200 main jet. i was on billspipes.com and found that it says to ran a 300 main. this is what came in the bike so they never re jetted when the pipes were added. i think im going to paint my bills pipes, im not sure yet. im not sure how they feel.

how much for the stock bumper? hopfully cheap im low on cash and trying to rebuild my topend, and would you part a right headlight from the 2?

how much for gas tank?

i need a gas tank for a 1990 banshee as cheap as possible shout me some deals that i cant refuse.

yeah i dont have that kind of cash tho. if i get any pipe im going with the LRD's

thanks for the replys. ill keep this stuff in mind, what timing plate would be the best? im thinking maybe just throw some wiseco pistons in there and get the head shaved with my pipes and filter and should have a good running bike. i want something with a hard powerband...

okay since im rebuilding my engine im thinking of the best things to get my engine redone, this is what i thought - bills pipes (already got them) - boyesen power reeds $60 - bored .50 over (already done) - wiseco pro lites ($120) - uni filter ($20) - fmf boost bottle ($40) - +4 timing degree key ($10) - milled head ($75 i think?) - jet kit ($50) - open air box. (free) - outerware airbox lid cover ($20) is that a good set up? im going to be doing all around, hard riding trails, track, w/e i can do the bike is going to be ran hard. will have have to run race gas with them mods? also my buddy has a yz125 carb hes going to give me, will that be big enough to run 1 carb on the 2 cylinders?

thanks, all tanks fit all years? this one just dont want to come off and when i got it off it wont go back on.

okay since im on a budget to get my banshee going can i reuse the same metal gaskets? i was thinking about putting gasket sealent on them to seal up real good. also my gas tank so so hard to get off idk why but i dont think its the right one. are all the gastanks the same on banshee all years or they just plain hard to get off? i ended up putting a hole in mine and i was thinking about putting plastic expoxy on it but i think the gas might eat right threw the epxoy.

duncan makes nice graphics.