RoostRocket

i used the hammer and screwdriver technique once and destroyed the fucker in the process... i would either go make your tool like others have said, or buy the tool from the dealership. its a 30mm bolt thingy with a 3/8th drive hole so you can use a rachet on it.

i think its possible you will probably have to do some sidehilling to get up thought.. if you do it i would make sure and do the oil injection block off first, because of the angle and length of the hill it probably wont inject oil into the gas.. i know ive blown up a couple blasters on knarly hills lol... good luck and remember to get pics and or video :thumbsup:

yfz450 headlight covers SOLD!!! cascade t5 pipe clamps SOLD!!! thumb throttle levers SOLD!!! HEP taillight SOLD!!! grab bar sold pending payment!!! TTT... edit: i also have a stock brake rezzy and throttle cover if anyone needs them. free you just pay shipping...

i will take that taillight off your hands if you still have it.

yep still got them. they just need rubber its like 5 or 10 bucks from cascade.

welcome to the HQ bro! good find btw i havent seen any other gusset kits being manufactured i wish they showed the banshee kit on the site though. edit: i just noticed you are tpr. do you have any pics?

pm sent... all pm's replied to!!!

[email protected] thanks kiel!

my favorite past time aside from atvs would have to be working out and partying :beer:

banshee wide rear grab bar $30 cascade pipe clamps for t5's $15 (needs new rubber like new) 1 1/8th universal bar adapters $10 2 thumb levers $5 bucks a piece stock shifter for banshee $10 yfz450 drop in k&n air filter $20 yfz450 cascade headlight covers $10 small tear in one. yfz450 HEP products led taillight practically new $30 really f'n bright! stock 06 axel, heel gaurds, upper a arms make offers! all prices shipped. here is the taillight mounted om my 450. could easily be modded to work on a banshee. it is a tail/brakelight...

i know your trying to trade but i got one just like the one you want off ebay for 100 bucks and i love it. edit: i just noticed they went up to 150 now...well it was a good deal

thanks for the help guys, but i got ahold of him and we started talking then next thing you know ive got him ditching the 250 project to start a banshee project....

thanks zach ill go check it out... shit i didnt even know there was a quadracerhq. as far as i know he needs everything chasis related a arms, swinger, frame, axel, hubs etc...

stock banshee shocks are only like 14.5 eye to eye so at 16 inches. they would fit about like yfz450 shocks and put a lot of stress on the ball joints... i personally have never heard of them maybe someone else has experience with them and will chime in.

i not sure ill ask him as soon as i can but it would need to be shipped out to washington. hes got a motor and everything its just the chassis that he needs. thanks.

TTT... nobodys got one laying around?

s&s motorsports on riverroad in puyallup is a good place. the owner and builder there is kenny hes a good guy/builder, but prepare to wait forever to get your shit back... overall best local shop ive done business with as far as motor work goes. i personally like using cascade mike is a great builder and his turn around times are great and hes about the most honest guy ive had first hand experience with in this business but its about a 3 hour drive to drop your bike off there. before this gets off topic into the my builder is better than your builder shit these are just my experiences. :thumbsup:

my buddy needs a frame for an lt250 if you got one pm me a price and you can send pics to [email protected] thanks! oh and he also need various other chassis components so let me know what you have...

DONT DO BUSINESS WITH THEM!!!! i had him do some work for me and he fucked up and refused to make it right. mike from cascade who rebuilt my motor after marty, the owner of nw custom sand toys fucked my shit up said that it looked like a rookie rebuilt my motor. then to top everything off my brother in law took his 450 to him without knowing of my problems and charged him 1100 to install a steering stem and do a valve adjustment. he is a shady mother fucker who will take you for what your worth.... if you end up using him dont say i didnt warn you.

i have to say that eddy has been getting much better over the last few months... shit i remember when i would get pissed off trying to understand what the fuck he was saying... lol. but seriously if you are having a hard time spelling you should get help even if it means spending a little less time on the HQ.

alright so after a month of waiting i got my laker custom plastics and they are f'ing sick!!! they are made thick like fullbore but they still have the boxy banshee look. anyways ill try to get some pics of them tommorow but ive been drinkin and im not sure i could operate a digital camera lol... :beer:

ill take the ss rear brake line if it is still available and in good shape. send pics and paypal info to [email protected] thanks!

yeah florence is cool especially since so much of winchester bay is getting closed off. go to them both and check out coos bay while your at it.

my favorite spot is winchester bay IMO it has the most diverse terrain out of all the oregon dunes from some knarly hills to trails to jumping or whatever, you can do it all there... i think the sound limit is like 93 or 98 there but ive only been caught once and that was with a raptor blowing almost 120db. you have to pay to camp on the sand or in any of the parks im not sure on price thought. i always stay at windy cove camp grounds its like 15 bucks and it has a shower... hope that helps.

mine held up great for a couple years before i had to replace it. the clutch in my yfz450 however burned up after less than a year.