alisn4x4

::FATTIES AND AXLE PENDING SALE::

pm sent. send me your email for pics.

::UPDATE:: :MOTOR HAS BEEN SOLD / PENDING PAYMENT:: :: FRAME PENDING SALE:: open to offers on the other items. pm me.

done.

tedd1 - you have PM buddy. who did you use to ship and how did you ship the frame?? never shipped anything this big so i have no clue. PM me and we'll figure out how to ship this thing and get you a price on it. thanks.

curve- ill go investigate a shipping price for it and go from there. duner440- you have PM

emails sent.

ok so imma start off fresh with a post on what i have left. parts are located in San Diego CA. i prefer local pickup for the large items tho shipping is possible. PM me your offers on what you'd like. - J-arm frame with NIB a-arm conversion kit. no cracks. no title tho had the numbers run and has no back fee's register it as a green sticker bike no sweat. - Complete motor. includes everything in the bottom end, clutch and all the covers. crank is stock with maybe 1 hour on it (if that) just resealed the bottom end. trans in PERFECT shape! (i have pictures of the gears before i sealed it) Jug's need to be bored out to match the 65MM pistons. i have a NIB wiseco pro-lite kit from Magic Racing. ($170 bux there) jug's have not been ported. so have at it. has stock intake with NIP boysen dual stage reeds not even installed. THIS IS FOR A NEAR COMPLETE MOTOR. ALL YOU NEED IS TO HAVE THE CYLINDERS BORED TO MATCH THE PISTON KIT, ASSEMBLE THE TOP END, SLAP YOUR CARB SETUP ON IT AND IT RUNS! - FMF Fattie pipe's and HIGHLY polished silencers (power core 2) pipe's have light rust int he usual place behind the pipe's where it dont show. otherwise in good shape, no ding's, no dents. silencers are polished to a mirror like shine, no dent's either. - Coffman raw pipe's and silencers. (mid-top end) pipe's are raw metal right now, no ding's or dent's. silencer's could use a clean up but are ding and dent free also. - complete stock rear axle with carrier, brake disk, hub, and sproket hub. no outter hubs. threads and splines on the axle are in good shape. - rear shock linkage. complete upper and lower linkage. lower dogbone is polished. - seat in perfect shape. 91 red, was reupholstered about 1 yar ago. - radiator in perfecdt shape. no dents. all fins are in great shape, inside is clean with radiator cap. - stock steering stem. good shape, straight. - front hubs, calipers, and spindles. in good shape. could use a going through. - stock thumb throttle. good shape. - front brake cylinder. good shape. i think thats all i got unless i run into any more parts i forgot to mention. PM me your offers for the parts you want. MOTOR IS SOLD COMPLETE AND NOT GONNA PART IT OUT SO PLEASE DONT ASK. pictures are available for serious inqueries ONLY.

kick starter is gone. shocks are in rough shape, i wouldnt wanna sell em to anyone.

anytime man. glad i could help. i know what its like to be in a pinch like that. rear caliper has been sold, so has the rear master. rather not ship the frame. might have a local buyer on the frame. coil is still avail. guys, please PM me on the stuff you want as its easier to keep track.

bump

np

yzf450killer has first call on the axle, carrier, hubs and lower polished link. you have pm. bigcrewduramax - flywheel looks like new. still avail. smokin 2 stroke - rear axle is pending on yzf450killer. if he dont want it you have next call. ellison445- whole piston kit 150. no less. its still wraped new in a box. pm me if you want it. hinkle- you want the complete wiring harness?

ill get back to you guys on prices by tonight...

plastics arent in the best of shape. the front fenders are in 2 peices and the rears would need a real good scrub down. pipes are in nice shape. no dents, light surface rust like any of em but nothing bad. silencers were recently polished to mirror like shine. looking for 330 shipped for the fatties still got lots of other parts left. pm me and ask for parts, and ill let you know if i still have them. ive been dealing with a family emergency so sorry for the late replies to everyone who's PM'd me the past week.

matt96shee- clutch might be taken... waiting on reply for that. streetsweepaz- upper j-arms are spoken for. the lowers i still have and are in decent shape. if yer gonna just chrome them its cool, they will need a blasting anyways. make an offer on em.

yup... i have a whole front end. PM sent.

matt96shee- the 2-1 carb and manifold setup have been sold. i still have the stock manifold and crossover. blaster rider- i have a set of ITP wheels. one has a dent on the inside of the wheel from some jackass accident at the dunes. outter lip and inner is still perfect. just a slight bulge on the inside. if intrested, PM me. luisg1- i have a set of tie rods with good boots too, ( i think last i looked they were alright) PM me make me an offer for em and where are they goin to.

more yet..

more stuff...

more stuff... and more to come.

pictures.... ill post more of everything else as i get to them. this is the first batch.

dilusi- make me your offer via PM on the seat, where's it goin. reupholstered about a year ago. ill post a picture of it. scooter- pm me your offer, and where theyd be shipped to i have someone also intrested. cylinders have all paint stripped bare. ill post pictures of those as well. refloyd- pm me an offer, and where they would be shipped to. matt96shee- yes, its a 2-1. sale is pending on the carb. grpark20- i dont have stockers. i have some beefy baja with rim guards type wheels. ill post pictures here in a few. okbeast- sorry, no cool head, just a stocker. pretty much iom taking offers on everything right now guys. if you are intrested in something, PM me with your offer, that way i can keep track of who asked first and what not. ill return your PM's in the order i receive em and as quickly as possible. im working on getting pictures of everything right after i post this.

hey guys, i ended up buying a whole bike and am looking to rid myself of everything off the other bike to cover the expense. i have everything from the bike, stock unless noted. top end needs a bore out to fit 65mm pistons. non-ported. also have the 65mm piston kit new in the box wiseco pro lite top end kit, includes everything including gaskets to redo a top end. i also have a kehin pkw 38mm carb with cable, intake and spacers in perfect shape. bottom end was just redone with all brand new seals. just placed a crank in it with 2 hours on it with the rod's already attached. pretty much this motor is ready to be placed together. just needs to rebore the cylinders to the pistons and its done. i also have a stock stator, plate, flywheel, vito's advance key, two sets of pipes and silencers. one set of FMF fatty pipes in good shape, no dings minor surface rust on the pipes, the other are coffman pipes also in good shape, chrome cooler rack, and a stock crank with rods... one rod has a bad bearing in it otherwise in good condition as well. also have the frame wich needs to be registered. its a 91 with j-arm front end, but i have the a-arm kit new in the box ready to weld in. frame is clear off the system. no paperwork. just go down and register the frame, no backfees on it. have steering stem, all the stock front end stuff including brakes, calipers, rotors brake lines, hubs, shocks, and bushings. i also have the seat recovered in red, rear swing axle, and all the bushings, rear axle with the carrier still attached in good shape, rear caliper, shock wich needs a revamp. if you need something, let me know and ill see if i have it. ill post pictures on here once i get the camera back from my buddy's house tonight. ill post prices on the items once i get the pictures up tonight as well. or, you can PM me offers on the items listed if you wish. thanks. items are located in san diego, ca

theres three that go on the front. one egg shaped one that goes near where the chain enters within the frame rails and two round roller type sliders. magic racing has a complete kit with all included for around 70 bux.