5150banshee

you could throw t5 silencers they will match up i have seen that done before and toomey sells them for like 120 bucks.

i would try cascade inovations,the usually do crazy seat covers.if you cant find it let me know my guy could do it.

ignorance actually saved alot of us money back then,now look how much we spend on these bikes. :biggrin:

you guys have any pegs.

ebay has some for 10 bucks right now i saw 3 pairs.

i have an adjustable stator plate that i got off ebay for 40 bucks and they are good thing to have to replace stock,very easy to use and install.

i ride nothing but sand and i ride a lot and my rear axle is chrome,and it does get beat up i usually re chorme once a season.no that u brought it up im thinking about a pc job on it.

i still have not heard from him or got my swinger or my money back,like i told you pn the phone i just found a round house on ebay for him for 225,i still want my shit from this guy.i think i will contact lee see what he could do for me.

a shee is not a shee unless you kick it over!!! F#$k that electric crap.

you gotta remeber that the chain should be lose when your off the bike and when you sit on it,the chain should be level and snug.if you make it tight while off the bike when you sit on it it has even more tension wich creates more stress on the trans,thats why the noise got louder.

when you throw an after market gas cap like an RIS or a modquad they have those gaskets in them,so yes its an actual aftermarket banshee part.

i was thinking the same thing

looks like someone will be having a fun time. :thumbsup:

thanks bro,i actually thought about would i really sell it and after a week she is up for sell.after a couple mounths ill build another one,i need to sell it asap.

well need to have money to make money so i have an investment im going to do but im a little short so i need to sell the shee and after the investments done i will have all the money to build 2.so shee's gotta go 1998 banshee 4mil stroker blaster pistons 35mm carbs billet intake no boostbottle k&n pods&outerwears milled head polished head&cylenders chrome clutch cover,water pump&insert billet stator cover everything on it is chrome(pegs,shifter,a arms,brake etc etc.) +6 swingarm paddles all the way around on new blue label rims custome paint jolley rancher green and chamillion with matching seat all ss lines and terry cable short throw throttle i cant remeber everything that done to it but this is the basic im asking 5500 and local pick up only or arrange your own shipping i dont wanna deal with shipping it out,i have an extra 5 gal of 110 octane matching helmet flags oil coolint etc etc,bike is really fast.

i have a set 35's on my bike but the stockers in the garage ill take them apart this weekend and send you a pic.

the stock one will work but i would spend 60 bucks and get some nice billet ones from john at sandtoyz

i heard that it was going to be on saturday,i might be able to bring some lights and a generator,as far as the grader im assed out dont have one.

i ran it on my bike and i liked the power it gave me but i did not like the major wear and tear it put on my motor.i had a fogger system so we had to tap it into the carbs,i dont think you have enough done to the motor and you are going to definetly need bigger carbs i was using 35's and have quit a bit done to the motor.

talk to jeff at F.A.S.T ot give majicmike a jingle either of those guys will get you set up withe motor you would want,cause thats the first thing you do.

what r u mixing at mine did that when i was running 36 to 1 so no i run 40 to 1 and it stopped it just means too much oil.

looks good,need lots of chrome nothing looks better then green and chrome!!!

call 1800 500 sand and talk to john.

why not just buy a new one they are only 40 bucks or so.

if i where u and money was tight i was just shave them down and wait to get it done the right way.just beacuse if you end up spray painting them when u got to get an actual paint job it's gonna cost you more money to have them stripped down.