tripledsracing

for the other guys ? id say around 230 hp on motor... thanks for the compliment,im looking for a twin cub,dm,cougar,etc...lmk what you have and we may work out a deal..

be a good race id say!..nope wouldnt be a fun trail ride for sure..lol..thanks for the bump!

yea just change the needle and seats...the pump would not benefit!..

another paint chip eater!..its a rigid drag bike duhhh!..

i do have a fuel pump id sale with it for 25 bucks..

i got a set of 30mm alky carbs that were 28mm and bored 2mm and ran them on a 6mil stck cyl and worked great..they are setup for a pump..no pics but can get some if needed but not askin much for em id take 75 bucks shipped..

pics..this swinger is for a lonstar drag frame..needs cleaned up didnt have time.. Uploaded with ImageShack.us Uploaded with ImageShack.us

got a stock head off a 05 35 bucks+ship!...got a milled head thats oringed off a 6mil stck cyl take 50 bucks+ship..chrome rear grab bar..25 + ship..aluminum front bumper take 35 + ship..front brake lever 20 shipped.. stock head Uploaded with ImageShack.us Uploaded with ImageShack.us stck head oringed Uploaded with ImageShack.us Uploaded with ImageShack.us rear chrome grab bar Uploaded with ImageShack.us front lever Uploaded with ImageShack.us bumper Uploaded with ImageShack.us

thanks..make someone a FAST bike..

i got a 16mil dm triple on a 100in lonestar frame,it does have a billet tranny,etc..it has the best of everything..also be willin to trade let me know what you have and what your asking for yours..im asking 15k for mine and is stupid cheap just ask kim what it cost to build the motor alone...anyway lmk here is a pic of my bike.. Uploaded with ImageShack.us Uploaded with ImageShack.us

agree kim is the shit on turbos!..actually everything he touchs screams..which dan a&s does too!..

bump ttt.

should be a perfect paddle for your setup..i run the same paddle on my 4mil..what gear you gonna run?

got a nice 10 over swinger lonestar..i have a 16 over on my triple and this one is just like it..350 + ship..here is a pic..

wanna be fast well here ya go!..

ttt

oops sorry i was responding to killer but was agreein about the compression with you...which my lil 4mil had 130 comp and suppose to be 185-190 and the bike screamed but was bout to explode too..lol..so lower compression shouldnt hurt it unless you are talkin really,really low comp but 90 from 120 dont sound that bad to me,but if the bike has a air leak that would cause it to run like shit..jmo..trust me ive had a few bikes that done this and we chased it for months and was suckin air at the key way on the crank on my triple!//..

New A&S 18mm DM, 160.3 HP Dyno information available thru Dan. Polished Stock cases, 6 speed full overide tranny, V-Force 3's. Long Block will include: Cases, billet crank, tranny, pistons, cylinders, domes/head, reeds and intakes all for $5,500.00 Uploaded with ImageShack.us Uploaded with ImageShack.us

you are correct 120 comp but it still should run decent have you checked for a air leak?..also the reed will cause it to bog and be hesitant so for sure change those and make sure u do a air leak!

u can also get a key that will advance it also,but id get a timing plate so when you upgrade you can change to what ever degree you need..here is one on ebay for 30 bucks shipped http://cgi.ebay.com/ebaymotors/Yamaha-Banshee-YFZ350-Adj-Timing-Plate-10-_W0QQcmdZViewItemQQhashZitem1c167d47f0QQitemZ120636393456QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

no shit!..bunch of em on here has eat alot of paint chips!

my buddy has a pipe that may work il see if i can get pics and let n20 look at it and see if it would work if so he would sale it to ya im sure..also maybe call dan or kim and get some info from them before you go to far with it!..but i hope you figure it out so i can start to build me one if you are successful with it just keep us uptodate on the build if u dont mind!..good or bad and if its bad heck at least you gave it a shot..

lol..you better listen to n20 about the turbo bikes they are hell to get right and if you do get it running good well the next pass it could go all to crap,blow up,etc..there is only a few builders i know that can get a turbo to work and they(k&t-a&s)have a heck of a time out of em as well..i was gonna build a turbo bike until i seen dan at a race tuning on his every pass and always something breaking or adjusting constantly but when u do get it going please let us know how it goes,which i know how its gonna be a disaster waitin to happen!..and a snomo and a banshee is 2 different beast!..

u guys dont relise what a deal this is!...rudy kurtz is da man and you cant build the motor for 3500 bucks let alone how this bike runs!..bump ttt