Banshee4Drag

30# pilot sounds BIG... i run 27.5 in a drag bike....But the high idle sounds like you have your slides in wrong carbs. Check and see if the slides are correct... really slides like you have them mixed up. Which would either Not idle or High idle...But would run almost strong otherwise

I understand what it is short for...you ride with them? sen them and Sand Drags in Bonne Terra, they did not fair so good...

GT Perf?

Ok does a Short Axle make a difference on a drag banshee? Is the shorting of the axle done for 1)Makeing the bike stay stright under load, which in thorey a shorter axle should... 2)getting weight to tire' which just because the axle is shorter, you still weight the same, But this would put center of gravity closer. which would in return get power to the ground faster right? 3)Something Longer turning in radius loose's power wich in a axle cause would lose HP the longer travel it has right? 4) Or im tottaly off track and people do it for the look's which does make a drag bike look better, but also makes you lookf fatter....HeH Anyone have any input on this....I shortin my axle ALOT ran full floating brakes NO carrier and it make a HUGE difference, Pullin a stright line, and luanchin harder...Anyone have any insight on this....

i have a set of T-5 pipes everything with them even throw in the jets you will need...Im just guessing around 310 with pipes and K.N but who knows.....225 for the T-5

all banshee axle or going to fir minus hub's....Raptor axle's will fit too, wait wait so will a blaster just have to use a floating brake AkA blaster brakes and make a 3 inch spacer all depends what your tring to make...

Missouri

yea i talked to him, and PM him last night but hes not around and i need these by friday

need skat trak hauler's are any stright paddle....20-11-8 22-11-8 need by this weekend

Few things here. 370 is not a big bore. 2) fill the boost bottle with sand and use it as a paper weight, If they worked at all you would seem them on drag bikes and duners but instead you see crossover tubes R new intakes with no crossover tube at all..More air always means more dirt. and just adding air, and upping a jet size will not make a huge difference, And i seemded to have forgot whats the American Quad? a Gas Gas? there motors and moveing parts are made in china and and put toghter in USA... But If any USA shop would make a Twin cyd. screaming bike that only thing holding it from growing wings and flyin is the wallet in the pocket i will buy that thing!!!!

Im looking for stock stroke clyinders, but drag ported, might go will 4 mill dont know yet.. +8 swingarm, and tire size im not to worried about, 20-11-8, 22-11-8, anything in a 8 inch

Hey i need DRAG ported cyd. +6 or 8 swingarm, and some good cont. Skat Trak Haulers or any stright paddle from skat trak. Any help. Looking to build this bike in 1 month

i have a set of 10' rims has some tires on themm HeH good luck getting them off there dougles black label i belive PM with offer

I dont see why not. the TORS? If you have not removed it, you better. they just cause problem's anyways. Get a kill switch if your worried about it...

hey thats now the question...but maybe you answered it in your own way...HeH

LMAO.... Ok this is great a banshee starting and going backwards....LMAO...the funny thing here is that my banshee did the same thing and noone in town would belive me....BIGWILL the reason a banshee run backwards is ONLY from back fire.....the motor has to be back fireing bad when you kick it, the crank can turn backwards and fire, which makes the the bike start but you have reverse... now there are few things that will do this MAJOR reason is the flywheel not on correct.. Buy a new key for 4 bucks, and make sure it lines with the key way in the fly wheel...Im willing to bet this is the problem...there are 2 others that can cause it to happen every now and then...But the flywheel missalligned is the problem with yours...

Do reed spacer's make a difference, or a difference you can tell. if so is it better to pull the reeds away from the motor are pull the carbs away from the reeds? And how wide should the spacer's be?

hey man i have a set of carbs, stock if thats what your running, they need a clean job, and put all your insides in them... let me know great price on them too...

noss cool head, port polish, K&N filters,adjust stator plate....low budjet

looking for 22-11-8 Skat Trak hauler, taller hauler Extrmeme, a paddle for sand drag

looking for 22-11-8 Skat trak Hauler's ,taller hauler Extreme, , a skat trak paddle for drag let me know

but the out of frame looks better

1 for shearer....do they make an out of frame..i want that out of frame look

Ok the million doller question... What Pipe will out perform... Im looking for out of frame small bore...Does rocket pipes make an out of frame? Are CPI better than a shearer? Who has run different pipes Im looking for good mid range and rip your arms off High rev.....what pipe can take a short shift and still pull...??????

Ok, count me in this, i know i will win...(HeH)