okbeast

This is sweet man. Whenever you're ready to build me a battery tray and wheelie bar and weld up some pipes lmk. Got a lil work needed done

Do 350 cubs count?

bump I know someone's got some stock shocks laying around

I need the lower steel bushings out of the stock shocks. I also need one of the stock lower bolts/washer/nut.

That's not too shabby. Even got a soft strip to keep your vagina from getting hurt.

Good luck man, any recommendations where to send shocks for work?

Where you live in dfw tnt?

M&M's cranks are better than hotrods or wiseco's or any of the other run of the mill cranks available.

We'll be there. Stayin' up top somewhere

This. Just sucks when you figure it out in the final round at a race lol

Need one for my banshee. Preferably adjustable between 11.5" and 12.5".

M&M has some sweet deals on serval kits right now. Definitely check him out.

Ya I'd be really weary about running it like that. I mean you can but why waste the money on having to get new cases etc. when you know it's going to crater and soon. If you want a playbike I'd suggest a 421 serval or even a stock stroke serval. Just depends what kinda crank you have laying around (thought you said you had one) and what not. Give Andy at M&M a call. He has 1-day shipping to the dallas area which is sweet IMO.

I put a switch inline on the black wire going to the coil. No problems for 3 years except for the switch going bad.

Boy I would HATE to see what they cost new. Was J Menz running them on his 3.97 when he made the 3.5x pass or w/e he made?

Ya, hell make sure you put a rag under the piston when you pull it apart in case any pieces decide to fall apart. If you run into any issues holler at me, I'm just over by Cleburne.

I don't know what the actual spec is, but I would think it would only be .5mm to 1mm of rotational play just from all the tolerances in the separate components. Replace the bearings and see if it helps.

Have any builders tried using these to see what they can get out of them?

I guess I forgot to add that part too. We do it on concrete and it leaves a residue if it has oil in it.

Pour some out and set it on fire. If it smokes it has oil in it. Best way we've found lol

I'm gonna test a set of 14 extremes this weekend at the track. If I like them I'll take these for sure.

My 4mil cub with similar mods and 35 pwks has 155 main and a 48 pilot. That's around 1300 ft. elevation and I believe it is a safe jetting. You might want to start a little higher just to be safe though.

Yeah the Lectrons I have seen already have idle screws.

Yes it is a complete motor. I sent you a PM with all the details, chances are I forgot something though. I'll try to get some pics here soon.