firefighterjosh

I had about the same mods you did and I was about mid pack most the drags. Really depends on who you are dragging. Get a good set of paddle (i did not) and you should be able to get them. My friend had a stock 450r with the hrc kit and at home in the field I could take him all day long. Now in the sand we where about even. All in the traction

Thanks for the responese. I posted a link to this topic and hacen't heard a word since

Thanks for the reply yes ppl have been saying it has a rev limiter to me quote: -------------------------------------------------------------------------------- Originally posted by firefighterjosh 2 strokes do not have rev limiters NONE OF THEM....the cdi box controls the spark not the rev limit -------------------------------------------------------------------------------- If that is the case how come if it controls the spark why will it still run the same with the cdi box unplugged? they guy that quoted me thinks it has a rev limiter

Just need some info...kinda little fight going on between me and some ppl. What does the CDI box do for the banshee? Someone says its a rev limiter Some say it controls spark Some say the banshee can run without it Let me know what your thoughts are

I want a whole seat with no tears or holes. Let me know what you have :biggrin:

sorry for the late reply I have been a busy man with racing season just started. The quad has been sold.

I was going to part it out but I have no time right now. PICS SENT!

Sorry that was the parts list that goes with the banshee. it is in good shape. needs clean. It had a Outwear on it and is in good condition. I am trying to stay away from parting it out for right now

OK I was going to part this thing out but now racing season has started and I want this thing GONE!!!! I have no time to mess with it. :: I want 2k Out of this. I really do not want to ship and I am willing to drive up to 50miles free. Anything over that I would appreciate gas money :thumbsup: Its a 2002 Yamaha Banshee. It had alot of aftermarket parts on but I recently parted most out. What it does still have...... Almost new belly skid 2 swing arm skids...1 brand new Delta V-Force Reeds Tors Removed Vito Forged Pistons, 3 years on engine but hasn't been rode in about 8 - 9 months. Started 6 months ago last. Always ran 32:1 ratio gas and oil mix. Never had any tranny problems. K&N Filter with Prio Design system Adjustible Timing plate, new higher watt stator and fly wheel fromt ricky stator Comes with ITP Race Ring Rims with Razr tires in rear (1/4 tread) Regular ITP rims All stock rims (seen in pic) Nice PC Blue Silver Vein Frame. Blue plastic - some white stress marks where the bolts were touching GWC +1 Steering Stem X5 Tag Bars I have stock pipes but its still jetted out for T6 Pipes. I can't think of much else. I also have alot of aftermarket stuff Like I said first 2k OBO to my house gets it. I live in Columbia City Indiana which is 20miles West of Fort Wayne Indiana. I have pics upon request

Thats for the advice but I don't think the trannys are like that anymore "Gear changes happen courtesy of a four-speed transmission in a 1-down, 3-up configuration" http://www.motorcycle-usa.com/Article_Page...2526&Page=2

Send me your email and I will send you a parts list and bigger better pics

2k is the best I can do. Not worth it for me to sell it for less. Its getting warmer out and I could sell if for alot more then that together. I wont be online anymore this week so my number is 260-609-1705 if you wanna buy it. I live in 20 miles west of Fort Wayne Indiana

No what I am saying I think last time there was 70 PPL in that class and most of them are freakin insane ppl that want to try ot win instead of being consistent. Nothing wrong with that but I would never go in that class. Just a bunch of nutty rookies lol.

Dosen't matter what brand I ride. Just want someting that is decent;y reliable. I am on a couple mini pit bike forums and they say they are a good machine

Ya its a pretty nasty race. Ruts get very deep get ready to be on 2 wheel part of the time getting around the track. Also be careful of the water crossings 1st lap isn't too bad but the rest are hell. Also I would stay aeay from the 1st year racer class. they are nuts

Both my Grandpas somewhere around 65 ride but there slow as turds. My grandma who is around 65 as well also rides but she is slower then poo too. What can you expect they ride Rancher 350, popo 500 and a 250ex :yelrotflmao:

I knowe somone that has a Outty 800 and he beat a stock 450 by about a quad link. Now check out this vid of the Renegade killing a otty 800 just ot give you a idea :thumbsup: and I don't think they even topped out yet http://www.youtube.com/watch?v=sC5uU7hJhyw

I race XC locally here in Indiana. Where do you live? I go to the iroman every year. Its always really muddy. I suggest leave the airbox on and lid, good set of tires, full skids, Nerfs are your prefrence. I like them. I would put screen of some sort over your radiator for the start and maybe 15 mins after that. Something duct tapped on so you can year it off. It gets pretty crazy at the start. Work on your dead engine starts. I always Put it in 1st gear held the clutch in and gas at 1/4 throttle. When the flagged droped I would kick it over and the machine would be revving when I dumped the clutch. Got anymore quetions let me know. :beer:

Drag racing yes. XC No

Yup

YES it does have a title

I would go with a Edge chip and just strait pipe the exhaulst. My buds cummins http://vids.myspace.com/index.cfm?fuseacti...eoID=1110047178

Here is the ad 2005 125x pister pro pitbike,trade for complete banshee roller. 2005 pister pro,excellent shape. wanting to trade for complete banshee roller. Billie I think I am going to sell the engine outta my 02 banshee chassis and sell the chassis separate. this guy offered to trade strait up for my 02 chassis which I had for sale at $1200. Think its a good trade I know nothing about pit bikes. It would be my first :thumbsup:

TTT :thumbsup:

You just missed it. I had one but I gave it away about a week ago to a buddie that needed it for parts. I will keep a look out and PM ya if I see anything