peak-j

Sold! Thanks sheeridee11 Sent from my iPhone using Tapatalk

$135 Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

I have an adjustable width banshee axle, not sure on brand. The chrome has started to come off in a few spots, splines are great, threads are good. Axle measures 40" end to end, +4 axle. $150 obo. Buyer pays PayPal fees. Thanks! Sent from my iPhone using Tapatalk

Sold! Sent from my iPhone using Tapatalk

Yes Sent from my iPhone using Tapatalk

Pm sent Sent from my iPhone using Tapatalk

TTT Sent from my iPhone using Tapatalk

TTT Sent from my iPhone using Tapatalk

$250 Sent from my iPhone using Tapatalk

ttt Sent from my iPhone using Tapatalk

Have a used hot rods crank, I never personally ran it, it is used, bearings feel great. Only reason I'm selling is because I'm selling my banshee also. $285 plus shipping and buyer pays PayPal fees. Thanks! Sent from my iPhone using Tapatalk

I put the 290's in it, pulls hard through all gears. It will either go or blow at the dunes next weekend! Sent from my Motorola Electrify using Tapatalk 2

Here is one with 260's-280's. Left to right Sent from my Motorola Electrify using Tapatalk 2

Here are the 280's! For nothing being done to this thing, other than the air filter doesnt that seem a little big! I know the plugs dont lie but damn. I only ordered up to 300's Sent from my Motorola Electrify using Tapatalk 2

It looks like its getting more of a line to it, but still pretty light! These are with 270's, gonna throw in 280's Sent from my Motorola Electrify using Tapatalk 2

I will give the 270's a shot tomorrow, need to pick up some more spark plugs! Lol Sent from my Motorola Electrify using Tapatalk 2

It runs awesome through all gears also, forgot to mention that! Sent from my Motorola Electrify using Tapatalk 2

I warm it up good on the old plugs, go to a starting point. Put new ones in, fire it up, go full throttle through all 6 gears, pull clutch in, kill it, put old plugs back in and drive back to the shop! I do the same as i did with my old banshee, but on it i always got that nice ring around the bottom like the other guy posted. Sent from my Motorola Electrify using Tapatalk 2

Ok, heres the 260's, getting a weird looking pattern on the side! Still not getting the fine line towards the bottom. Any ideas as to why its making this marking on the side? Thanks for any help guys! Sent from my Motorola Electrify using Tapatalk 2

I went ahead and ordered 250-300 mains. Im slowly gonna add things to it so that way i will have them. Thanks for the quick responses, i will try 260's and do another plug chop! Sent from my Motorola Electrify using Tapatalk 2

Ok, i did a plug chop and here is what i got. Toomey 2-1 air filter no box, i was told just the reed petals were changed out. Everything else on the engine is completely stock down to the pipes, carbs synced. Warmed up to temp, put new plugs in, ran it full throttle up to 6th gear for about 5 seconds and ran out of room. Clutched it, killed engine, removed plugs and put old ones back in. Has 240 mains right now, 3rd clip. Let me know what you think. Thanks Sent from my Motorola Electrify using Tapatalk 2

Everything installed Sent from my Motorola Electrify using Tapatalk 2

Dont mind the brake line, i still have to change it out. Here is a pic looking from the front and the balljoints it uses. Sent from my Motorola Electrify using Tapatalk 2

Dont think they are stainless they are quite a bit bigger than stock. The upper a arms have one hell of a angle in them at the ball joint. I will get a pic after i get the rest of it bolted up. Nothing looks bent at all, it goes through the up and down motion fine, no binding or anything like that. I just dont like the looks of that upper a arm either! Sent from my Motorola Electrify using Tapatalk 2