Bill
-
Posts
826 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Bill
-
Looks great,setup real nice.
-
The fronts are the same but since you have an 89 the rear hubs are larger(4x156 spread? :shrug: Ask the seller what the bolt pattern is for the rears.The rears should be the same spread as the fronts.
-
I bent my foot back the same way you did only it broke three bones in the top.Trust me youll know if its broke because you cant even walk.Might not be A bad idea to get the x-rays.
-
One of those spacers that go around the lockring you dont use for the banshee.Inside the locknut there is A recess that goes around the lockring.
-
Ordered it on friday and got it today,fast shipping and A great deal.Thanks! :thumbsup:
-
I know when I swapped over to an a-arm frame I had to use newer calipers and spindles.I dont know for sure if you could use a-arm spindles and calipers on j-arms,give it A shot.If it dont work out I got 89 spindles and calipers that are in good condition for cheap.
-
Just bought the bar clamp,thanks.
-
Fastenall can get any kind of bolt you want.the best way to do it is to hit up there website,get the part #,and have the store order it.Two to three days it will be there.
-
I dont think its supposed to be that tight,mabey your calipers need to be taken apart and regreased.The two bolts that the caliper slides on could have dirt in them.
-
Nope just get the old one out with A curled pick and put the new one in,no need to split the cases.
-
My first banshee & New to banshee HQ
Bill replied to LamboShee's topic in General Banshee Discussion
Sweet ride,luvin the orange. :thumbsup: -
Im thinkin its the stator.
-
Yea I guess I could do that,what about using recessed srcews in the rotor?I could cone those holes out with out any problems couldnt I?
-
Its almost like my front hubs are tightening in to much.The rotor bolts are only hitting by an 1/8in,and the calipers are not seized.
-
Im putting my banshee back together and the calipers wont go on.The bracket that bolts to the spindle gets hit by the bolts that connects the rotor to the hub.I bought these calipers of ebay,they are off A 2001 Raptor and are supposed to be the same as A banshees.Will they work or did I get A bum deal?
-
Looks like A stock frame to me. :shrug:
-
Is that axel extended,if so how much and what brand.
-
24 from MI. :thumbsup:
-
Is that A Gremlin?pretty sweet.
-
need help with my a-arm install...please!
Bill replied to qboronyrican's topic in Banshee Repairs and Mods
You need to get your spindles reamed,some aftermarket a-arms require this.Some say you can do it yourself with A tappered bit/step bit,or you can send them out to get done. -
I have A set off an 89 that ill let go,ball joints are tight and the bushings and sleaves seem good.$50 shipped.
-
Thanks man that website is great,did you ever have any problems ordering from them?
-
Does anyone know where to find the upper a-arm bolts and nuts?I dont want to go to A stealership and pay $100,000 A bolt :biggrin: .Do any of you guys/gals have any you want to get rid of.thanks
-
Good guy to deal with,met up with him,traded some paddles for A frame,it was all good.
-
I didnt use A weld in conversion kit I just got A different frame.