f4istunna

A ARMS SOLD

ill send pics of exhaust shortly wiring harness, ignition switch, airbox, and footpegs are sold.

Axle is Sold. Sale pending on wire harness, airbox, and ignition switch

NYZ called you no answer left msg with # get back to me thanks

sorry man. I didnt even expect the payment i sent pics out to everyone that gave me email address. Guy that bought them sent the paypal. 2strokelve thanks i noticed that after looking at a few other sets. I was told they were V3 and didnt know the differnce at the time. Nyz just got back home will be calling you in few mins.

Carbs are SOLD

ok finally got a little time to sit down. Uploading some pics to post. For those that asked #'s on carb PWK 29SBOQET http://imageshack.us/g/18/1010685m.jpg/

I didnt even list half that stuff for sale ?? lol cdi and coil are stock, stock rotors, its a modquad head not shifter, stock clutch.... joe pm returned

i got a few people asking so wanted to mention , i forgot to state in on the first page. All prices are + shipping if you need parts shipped. Anything i can fit in a flat rate box i will, others i can weigh, get a quote and let you know exactly what shipping will be. Thanks Charging my camera now, then all you guys awaiting pics will have them in email

i just got home, gotta get up early, day was alot longer than supposed to be. Ill get you guys pics of what i havent already sent tomorrow . Sorry

Stamped pwk on the side.

06 sent pics nyz ill call you tonight when i get home

Parting out a complete 01. Engine runs, shifts good. Compression was getting low. Located near youngstown ohio. Local pickup on the frame. I can ship the rest if needed. I accept paypal or money orders. I will ship by next business day after payment. +4 Swingarm, with chain. pc silvervein $250 pretty sure its lonestar but not 100% sure on that +2 chrome a arms with good balljoints and tierods (not sure brand) $175 +2 Durablue Axle $125 Modquad head with 21cc domes oringed 125 Full Toomey T5 exhaust system (pipes and silencers) 250 IMS oversize gas tank blue with petcock and cap needs cleaned up (prev owner painted, i stripped most off. $75 Vforce 3 carbon fiber reeds with spacers $125 Dual filter aluminum intake / airbox $40 Ohlins front shocks (standard travel) $250 Douglas front rims nice shape $50 Protaper Se bars $30 chrome flame grill / radiator guard $30 Aluminum front bumper $30 29mm keihin PWK carbs tors eliminated with terry cables. ( Good except choke doesnt stay up) $125 for the set Chrome stock height steering stem $60 seat custom cover $50 Heavy duty billet case saver with bolts $20 Bottom end is good, cases has the normal small peice busted from chain no leaks or issues stock stroke, good crank and bearings, good stock trans. Comes with flywheel and good stator with covers $350 Cylinders 64.5mm with pistons good shape pistons need rings. $250 Complete clutch , basket plates everything $70 Stock radiator $10 Shifter $5 Thumb Throttle $20 Ignition switch with key $20 Complete wiring harness with coil, cdi etc. (plug is cut off going to stator (was wired directly) $40 Stock rear shock $50 Rear linkage $10 Frame, Pc orange nice shape $150 Intake boots with crossover tube $20 Front wheel hubs with chrome spindles $50 Rear wheel hubs $40 Brake hub and rotor rear $20 Complete front brake assembly (master cylinder, both calipers and braided lines) $60 Complete rear brakes lever/master, braided line, caliper $60 Complete engine mount set $15 Axle carrier Good bearings $50 Stock rear wheels with 1/2 tread tires (few plugs) $50 Yellow tank cover and radiator plastic good tabs $30 Yellow tank cover $15 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $15 Might have forgot a cpl things so if you dont see it listed ask . Ill keep the list updated as stuff sells. If you see it i still have it. i have a few pics I can get pics of anything you guys are interested in just ask. I need to resize the ones i have ill do that when i get home tonight Thanks

Anyone have a seat laying around? Mainly just looking for an all black seat that has a good cover. But ill consider others. i was gonna just recover mine but the foam is split pretty good in a few places so figure its about time for a new one. let me know if you guys have anything thanks

i agree id split the cases if it were me might cost a few bucks in gaskets and some time but think of how much your gonna spend if somethings in there and wipes out your motor. Thats the way i try and look at it in those situations.

thats all sold sorry. just have whats on the list above on this page aside from whats been marked as sold in the posts following the list.

Seat sold

Clutch assembly Sold

sold the front hubs/rotors . Still have the rest of stuff on the last list.

clutch seat

i have a set of stock 4x115 rears straight. they have normal nicks and scratches on the lips. Id take $30 plus shipping for the pair (probably 15 or so to ship).

was cleaning out my basement yesterday and found another box of banshee parts. Also found a few sets of spare handlebars, stock silver yamaha rear wheels 4x115 if anyone is interested. $10 per pair of handlebars, most are steel one peice moose, msr or similar, have a cpl aluminum, renthal and nice set of tapers $20 per set. $30 for the pair of stock yamaha rims. -Frame straight and solid needs new paint or powdercoated. Has footpegs welded on $50 (local pickup) -Stock swingarm with axle carrier and stock linkage (bearings included but not sure condition) $30 -Seat with black Factory effex (FX) gripper cover. has one tiny tear (smaller than pinky nail) good pan, foam and latch $25 - Purple rear fender has a crack a few inches long behind seat and faded but useable, yellow tank plastic, and yellow radiator plastic $20 obo will ship take and rad plastic but prefer local pickup if you want the rears - Stock gas tank with cap and petcock $10 - 3 Rear sprockets 41 tooth with sprocket hubs, and one 15t front sprocket $10 all -Swingarm pivot bolt $5 Headlight/fender mounts $5 - Factory concepts billet clutch basket with complete clutch. Good plates, hub and pressure plate, bolts/springs and hardware inc. Bolts on gear on back of basket are grinded down some but worked fine basket has no grooving just normal wear. $50 - ( 2 ) Front brake master cylinders / levers with lines $20 - Stock clutch lever with cable and parking brake cable $10 - Kicker gear/spring assembly $5 - Front wheel hubs with rotors $20 - Rear wheel hubs $30 - left and right spindles $30 -Aluminum ac grab bar $20 -Stock radiator $5 - Rear brake hub and rotor $10 - Clutch cover with waterpump and stator cover *(stator cover has damage but useable) clutch cover/waterpump good $10 -shifter shaft $5 misc hardware engine mounts, chain tensioners .... if anyone is interested in taking it all shoot me an offer on the whole lot. i have pics of everything but couldnt get them to upload. ill try again later when i get home or send your email if you want to see anything thanks

i have a seat w/ black gripper FX cover. has one very small tear in the side otherwise very good shape. Good pan, foam and latch. Ill get some pics tonight if your interested.

coil sold still have the rest, make offers.

i have a good stock tank with cap and petcock $10 plus shippin