f4istunna

gordo id consider selling tank cover and rad shroud seperate make offer they are red and good shape.

i cant text pics guys sorry still in the stoneage when it comes to my phone... I can get pics and email them Make offer on bottom end / cases. if worth while ill split motor down kenny i dont have title for frame its 97 when i bought it had vins ran it came back clean so im sure could file for it if needed. supreme if you have email i can send pics of grab bar i tried to post a few but they are too big to upload and im not that great with computers to mess around with resizing

Havent been on here in awhile but decided to part out latest banshee project so figured id see if you guys wanted anything. Had plans for it but i just dont have time to mess with it and doesnt look like i will anytime soon. Its been apart in boxes for almost 2 years. Its basically all stock besides dg bumper, fmf fatty exhaust. Engine ran great when tore quad down. I was told by previous owner that its stock engine i never got around to opening it up. its a 97. Willing to ship everything besides frame and plastics I can meet up with those in youngstown oh area if nearby. . I can get pics of all parts. everything is in good overall condition. Ill listen to offers. Complete engine 750 or willing to split up... Front wheels with new tires ill have to dbl check what brand tire cant remember 100 rear wheels painted black with worn holeshots 30 White full fenders not cut with hood and shrouds 150 gas tank with petcock and cap 20 headlights both in good shape good cages 100 tail light 20 grab bar 20 dg bumper 40 fmf fatty exhaust pipes with silencers 150 wiring harness uncut 40 cdi 50 headlight / run switch 30 ignition switch and key 25 both carbs 50 good straight frame no cracks 100 thumb throttle and cable 30 front brakes complete master/lever lines and calipers 40 Complete rear brakes master/lever lines caliper 70 rear brake rotor/hub 25 radiator 20 airbox with lid tubes and filter 40 clutch lever/cable 20 intake/carb boots 20 axle with carrier good bearings 100 swingarm with linkage 30 Rear resi shock 50 front shocks 30 a arms (all4) and tierods 80 front hubs with rotors 30 spindles 25 rear wheel hubs 25 steering stem 30

ended up finding a box of my old banshee parts in with some raptor spares i had, and bought cpl other things i needed As of now looking for seat cover or maybe whole seat stock plastic air filter cage/filter if cant find that ill just put proflow setup on it. might be interested in stock plastic heelguards also if find cheap set

ill do that. Thanks for the tip

Been awhile since ive been on here. Havent had a banshee in years. Come across a good deal on pretty decent project last week. It just needs a few things stock filter cage Front fender brackets Shifter shaft Good seat or a cover plain black will do its going to be red and black with white fenders so some red or whatever on cover would work too. shoot me some pics and prices if any of you guys have something i can use. thanks

pics sent of orange tank/rad plastic and black maier front fenders. ya +2 a arms are long gone. only have whats listed above

bottom end, clutch, covers, and rear rotor are sold.... sidewayz whats going on buddy, I already have a set of yam, rims with paddles sittin away for if i ever make to the dunes, thanks though. Id be interested in trades for anything i could use though... outdoor pwr equipment, tools, toys whatever... bansheeboi whats your email for pics?

ya boots are gone

Still have bottom end Chrome stem complete oem clutch thumb throttle rear hub/rotor kicker lever/knuckle headlight switch seat that needs recovered and misc plastics make offers if you guys are interested in anything. Im going to list whatever is left next week ona package deal on ebay.

lol, ya all i have left is whats listed above. MAke offers need to sell this stuff off to make some room and raise a few $ for the winter rebuild.

never had headlights sorry Cylinders are sold now aswelll. Ill take offers on the rest looking to clear some room in the garage Chrome steering stem stock height. $60 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have a very small little chip missing from the chain hitting, outer crank bearings will need replaced. $200 Complete oemclutch , basket plates everything very nice shape $50 Thumb Throttle assembly (tors plug cut off) $10 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10\ Kickstart lever and knuckle assembly $20 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20

swiingarm was just sold last night sorry.

spindles/hubs just sold yesterday sorry carrier sold also heres whats left +4 Swingarm, pc silvervein some of the powdercoat is chipped off. Its solid no cracks or repairs. Comes with longer chain. $150 Chrome steering stem stock height. $60 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have a very small little chip missing from the chain hitting, outer crank bearings will need replaced. $200 Cylinders 64.5mm Good bore/crosshatch ( only .5mm over stock Means lots of bores left in them) $225 Complete oemclutch , basket plates everything very nice shape $50 Thumb Throttle assembly (tors plug cut off) $10 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10\ Kickstart lever and knuckle assembly $20 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20

i have orange tank and rad plastics id sell for $25 plus the ride

Toomey's Shifter and radiator are sold. Im putting alot of whats left on ebay tonight when i get home

Lsr +4 Swingarm, pc silvervein some of the powdercoat is chipped off. Its solid no cracks or repairs. Comes with longer chain. $225 Full Toomey T5 exhaust system (pipes and silencers) Good overall shape normal chrome wear up near cylinders. 225 Chrome steering stem stock height. $60 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have a very small little chip missing from the chain hitting. $300 Cylinders 64.5mm Good bore/crosshatch ( only .5mm over stock Means lots of bores left in them) $225 Complete clutch , basket plates everything $50 Stock radiator $10 Thumb Throttle assembly (tors plug cut off) $10 Intake boots with crossover tube $10 Chrome spindles with front wheel hubs and rotors Good bearings. $50 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Axle carrier Good bearings $50 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10\ Kickstart lever and knuckle assembly $20 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Shifter, Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20

bansheerilla pics sent to your email, let me know if interested in any of it. VTbanshy I still have the stock radiator and stock shifter. $15 + shipping for both... 951 the reeds are sold.

clutch is in great shape good basket, no grooves. I have a sale pending on it though., and another guy in line for it

Toomey's are sold

heres what i have left Lsr +4 Swingarm, pc silvervein some of the powdercoat is chipped off. Its solid no cracks or repairs. Comes with longer chain. $225 Full Toomey T5 exhaust system (pipes and silencers) Good overall shape normal chrome wear up near cylinders. 225 Douglas front rims nice shape Straight, few little dings on outer lips from trail riding. $50 Chrome steering stem stock height. $60 seat custom cover orange/checker $50 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have the normal little chip missing from the chain. $300 Cylinders 64.5mm Good bore/crosshatch ( only .5mm over stock Means lots of bores left in them) $225 Complete clutch , basket plates everything $50 Stock radiator $10 Thumb Throttle assembly (tors plug cut off) $10 Intake boots with crossover tube $10 Chrome spindles with front wheel hubs and rotors Good bearings. $50 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Axle carrier Good bearings $50 Stock rear wheels with 1/2 tread tires (few plugs) $50 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Shifter, Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20

rear shock is good man, Ill email you a pic of it later this afternoon. or just call/text me if you just want to see it. rob

Still have complete engine, modquad head (21cc), Toomey T5s, +4 swingarm, 3 bar bumper, VForce Reeds, Chrome steering stem, wheels, alot of plastics, And alot of stock parts... Rear shock, spindles, hubs,

i have one with good bearings, id sell for $40- 45 shipped depending where you are

Frame, Oversize tank, protaper bars, Case saver, front and rear brake systems, and ohnins shocks Sold