f4istunna

Had it for sale locally for a little while at $1800 firm, lots of emails and calls but no one w/ cash so decided to part it out. Thought id see if you guys could use anything before i put it on ebay. Ive bought and sold quite a few things on here in the past and always had good luck :biggrin: Id love to keep it but I have to many toys as it is and could use the $$ to repair some rental prop. I picked up. Selling my 05 Se yfz also if anyone is interested lots of new parts a/m. As for the banshee it ran and shifted great, i rode it up until the other day when i started tearing down. Topend is off, bottom still complete at the moment. 120psi at each cylinder 66mm bore wiseco piston. Can sell motor complete or in parts. Crank i believe is oem but im not 100% ill have to dbl check ( I never had this motor apart until recently, havent needed to). Good bearings no up/down slop in rod. Pro circuit platinum pipes and silencers w/ the usual discoloring up near the cylinders otherwise nice Everything on the quad works good. Stock suspension (white springs) White Plastics, gray seat. Axle and a arms straight. I have quite a few sets of spare tires/wheels im going to be selling as soon as i get a chance to go through them all. I only have pics of the quad whole at the moment, Ill get some close ups of the parts as soon as I get a chance. Heres a quick list of what i have off the top of my head. Ill make a complete list soon. All prices plus actual shipping to your zip unless marked w/ shipping. Pro circuit plat. pipes and silencers no dents ( theres one small ding if i remember right on bottom, up near cylinder has a little build up that should clean up w/ some elbow grease. $225 Cylinder w/ pistons. had 120psi before tear down. 66mm unported, overall good useable shape. $160 shipped Oem head good shape very minimal buildup on one dome $ 25 Complete bottom end good trans, clutch, flywheel, stator, sidecovers etc. Will need seal on kicker shaft soon, just started seeping out every now and again. Case broke in the usual spot No leaks, been like this since i bought it. Rode it all year no problems. $600 obo complete Will split cases if no interest whole. Stock a arms w/ tie rods straight good balljoints no tears. Will need a few of the plastic bushings where it mounts to frame (they are all there but a few have slop). A arms are blue $125 Oem rear shock adjustable, resi good charge $45 Stock swingarm blue $35 95 Frame w/ bill of sale footpeg welded on but could easily be cut off, (threads need repaired) was like this when i got it holds up great. Straight, no cracks or dents. $100 Feel free to ask for anything you dont see listed, like i said ill make a complete list w/ pics as soon as i get a chance. Thanks

i have a nice seat w/ gray cover if your still looking, drop me a pm if so thanks

I have a set of white racecut fronts in good shape. One tab mount for the grill has a tear in it but still useable w/ washer. Ill try to get some pics today

I have a stock yfz frame if your interested its a 05 $150 in NE ohio

sent you an email w/ a cpl pics Thanks

NEW prices All parts are plus actual shipping prices. Ill box them up and get a shipping quote from usps or ups whichever is cheaper. 94 Frame with swingarm good shape, no bends or cracks, good threads (pivot bolt seized in, I dont really want to mess w/ removing $125 OEM Axle w/ carrier, locknuts, castle nuts, brake stay etc. straight, good bearings $45 Oem Clutch lever/perch assembly w/ cable $10 Crank needing rebuild. The normal left side rod bearing went out good shape otherwise $10 Oem Front shocks White springs (paint chipped up pretty good) $20 Stock rear shock spring (white) Spring only nice shape $5 Oem white plastics w/ graphics kit (very nice shape) full fender uncut complete set $115 matching Gripper CEET $45 seperate or $125 w/ fenders Blue plastics good shape no cracks front, rear, grill, sides front race cut $45 Stock rear shock linkage $10 Front fender supports/mounts $10 Set of 3 Gytr flame shock covers $15 like new blue/white Eyeball headlight covers like new $10 Left side plastic engine cover $10 A arms set of 4 $20 a peice or $50 for all 4 (right lower has a dent) painted black Id really rather not ship the frame and plastics but i can if needed. Im located in NE ohio if anyone is close by I can meet up within and hour or 2 if need be. I have pics of most of the parts just need your email if interested. I cant seem to get them to post on the site.

Recently Cleaned out my garage and came across a few things I can part with. Most of the parts were from a very clean 94 i had some were from a 98 that was in good shape other than previous owner spray painted some of the parts. I have pics of some of the stuff from before. Ill get my camera back from my buddy this week and take pics of the rest. All parts are plus actual shipping prices. Ill box them up and get a shipping quote from usps or ups whichever is cheaper. 94 Frame with swingarm good shape, no bends or cracks, good threads (pivot bolt seized in, I dont really want to mess w/ removing it lol) $175 OEM Axle w/ carrier, locknuts, castle nuts, brake stay etc. straight, good bearings $60 Oem Clutch lever/perch assembly w/ cable $10 Crank needing rebuild. The normal left side rod bearing went out good shape otherwise $20 Oem Front shocks White springs (paint chipped up pretty good) $20 Stock rear shock spring (white) Spring only nice shape $5 Oem white plastics w/ graphics kit (very nice shape) full fender uncut complete set $150 --matching seat w/ blue/white CEET cover $50 ($175 for plastics and seat) Blue plastics good shape no cracks front, rear, grill, sides front race cut $85 Stock rear shock linkage $10 Front fender supports/mounts $10 Set of 3 Gytr flame shock covers $15 like new blue Pink stock front shocks One looks like it maybe tweaked a tiny bit but its hard to tell $20 Eyeball headlight covers like new (on ebay) ITP Rear wheels polished good shape 9" 4x115 (on ebay) f4istuntin is my screen name if anyone is interested Id really rather not ship the frame and plastics (always ends up being a pain lol) but i can if needed. Im located in NE ohio if anyone is close by I can meet up within and hour or 2 if need be. I still have to clean the basement when i get time im sure ill run into another box or 2 of banshee parts. Ill be sure to list them if so. Ill get some pics up asap.

sold the only cables i had left w/ the carbs and twist sorry...

Figured id update the list before i put the rest on ebay this week to see if you guys could use anything. Stock bumper good shape Stock rear carrier w/ axle and locknuts White headlights w/ grills nice shape Stock front shocks (pinkish color) Stock head (one dome could use cleaned) Crank in need of rebuild boost bottle Front brake calipers w/ pads and lines left side (stator) cover Set of 4 oem white wheels good shape Graydon proline nerf bars blue nets Rear grab bar w/ taillight stock gas tank w/ cap and petcock Headlight/kill switch on handlebars Blue 7/8th tag handlebars Tie rods w/ ends Stock kick lever Also have but would like to sell locally to avoid shipping Frame w/ swingarm good shape White oem plastics near mint blue/white ceet matches graphics for plastics Im sure theres a few things i forgot, If you guys dont see something feel free to ask Taking best offer on everything, going on ebay this coming week. Thanks

i have a set ending on fleabay 24 hrs if you didnt get a set yet http://cgi.ebay.com/ebaymotors/ws/eBayISAP...078882&rd=1

I have one its on ebay now at $30 i think 2 days left screen name is f4istuntin

I have stock white fronts in good shape normal wear on the lips $50 for the pair

thats mootman glad your pleased. I would sell the axle w/out the carrier but the thing is i cant get the locknuts off lol. I took the chain and brakes off so didnt have a way to hold the axle still while i turned the nut. So instead of getting frustrated i figured id just sell the carrier w/ it :biggrin:

gmc ya cases split and on ebay along w/ crank and tranny Pm replied

I saw it on cleveland and pittsburgh. I feel bad for the ppl that fall for it and get ripped off, but it isnt hard to tell a scam most times.

04 i just listed them on ebay this morning (listed 20 auctions) mostly shee a few 400ex parts. names f4istuntin on there if your interested. I could put a buy now for you.

4smoke the pipes sold today sorry Pat, I still have the headlights ill send you a pic. Joel shoot me your email ill send you a pic too.

i have a set i have pics just need your email bore measured 64mm Could use honed

Engine parts Cases good shape no damage $110 tranny and all internal gears, shift mechanisms etc $110 Oem crank and rods good shape $60 Oem crank needs one lower rod bearing/rebuilt $10 Oem head some buildup on one dome could use cleaned up $15 Cylinders Bore bore reads just under 64mm 63.95 on one and 63.97 on the other. $100 Clutch assembly complete $50 Suspension Front stock shocks purple/pink springs $25 pair rear shock yellow spring nice shape $45 Oem swingarm $25 A arms good balljoints/boots w/ hardware Oem $90 set of 4 Tie rods w/ ends $25 pair Spindles $30 pair Oem carrier and axle $75 rear linkage $10 wheels, brakes etc... Oem white yamaha wheels 10" front 9" rear $50 for 2 or $85 for all 4 good shape normal wear ITP wheels like new $100 per 2 or $160 all 4 Complete front brake setup, master, calipers, lines etc $35 Rear master, line, resi, lever $25 Oem steering stem w/ 7/8th clamps $30 Front hubs and rotors $40 Rear wheel hubs $30 Footpegs $5 Stock heelguards metal and black plastic peices $25 Graydon pro line polished nerfs w/ hardware $65 Graydon proline swingarm skid w/ hardware $35 SOLD PRM belly skid w/ hardware $35 SOLD A arm skids (coveres top and bottom (2 peices each side)) w/ hardware $35 SOLD Blue Tag 7/8th bars w/ pad $10 V force reed valves $75 not sure if 2 or 3? Clutch lever assembly w/ cable $10 DG front bumper $30 Pro circuit platinum pipes and pro circuit silencers $180 Complete wire harness w/ components (cdi, coil, etc) $45 SOLD Headlight/kill switch $20 Oem airbox w/ filter $20 Carbs tors removed w/ twist throttle and cable $50 Radiator w/ hoses and overflow $45 Gas tank w/ cap and petcock $20 Grab bar w/ taillight $20 White headlights w/ grills $25 Stock bumper $10 Local pickup or meet w/in a few hundred miles of NE ohio Frame w/ swingarm $200 good shape no cracks, bends etc White oem plastic full fender uncut very good shape $100 Blue/white CEET seat $45

thanks i appreciate the good word... :biggrin:

I have one $50 shipped nice shape

Swingarm skid Belly skid A arm skids Wire harness SOLD Thanks

pms replied Im going to try and avoid shipping the plastics if i can. I just sent a set out the other day and lost out pretty bad on them (ups backcharged me) ended up paying the guy to buy them lol

Shipping shouldnt be more than $10 on the head. shoot me a pm if you want my paypal info thanks

Replied.... anyone know why i cant post pics??? It says attachment space used 793 of 768. I havent posted pics for months on here, is there a way to clear them so i can post pics for you guys??