DOTD

We have room over here on the Colts bus for ya! Ha Ha.

Lights will ship tomorrow, along with the seat cover.

Paypal ID is [email protected]

Still have all of it except for the seat cover, and heel guards

Looks fine. But 2 things. 1st: Get rid of that stock donut chain slider, The aftermarket ones that are more like an arm are much better, and won't wear out the pivot tube. 2nd: The chain adjustment will be determined by the chain. Move it all the way in then cut your chain to fit. Then you adjust it out to set the slack. Other than that you're good to go!

From that pic you have that adjuster inside out. Turn it around so the marks are to the inside. Then you can line them up on the carrier so both sides are even. Not sure what you mean about how adjusting will affect the brake line length. It should not move that much, because as you tighten up the chain slack the carrier will pivot upwards. Post a pic of the whole swinger so we can see if you have it on correctly. I found a guy on ebay that makes steel braided lines any length for pretty cheap. His id is: jeff89120. The line is very well built and shipping was really fast.

I bought the same ebay swinger from CFM, who is a member here. There are a few differences in this swinger than stock. So you will want to get an aftermarket slider. RMATV has the Modquad one for $25. The new swinger crosstube diameter is smaller than the stock cross tube. You will see this when installing the bearing seals. Now they are no longer a functioning seal. Go figure :thumbsup: ! The two washers you got are for shimming the top carrier bolt. Make sure the bolt holes line up for the lower chain guide. Mine were about 1/4 inch too close to eachother, so any lower guide I use will have to be drilled out. Nice huh? I must have got one of those "blems" he was trying to sell on here. I sent a PM to CFM about it, which he did read, but he never replied.

Seat cover sold

PM sent

Yeah, ID is [email protected]

I am past the point of ever putting back any stock parts I have reoplaced, So here you go: Headlights with screens....$25 shipped Headlights without screens, bulbs, and harness clips....$10 shipped Stock Reed cages with reeds....$15 shipped Seat cover no rips or tears perfect condition....$10 shipped Parking brake actuator....$10 shipped Parking brake rubber lever cover and clutch sensor switch....$5 shipped Air cleaner, and snorkel....$10 shipped Stock Timing Plate bead blasted after the pic....$10 shipped Key switch cover....$5 Doublewide welded stock pegs....$40 shipped Stock Complete heelguards....$40 shipped **Paypal id [email protected]** Items ship UPS ground next business day after payment, and tracking # will be PM'd

???? Its a done deal

I'll take it! Whats your Paypal?

" i didnt know theyve been making the banshee for 50 years?, found this on ebay" DOH!!! :: Looks like that one blew up in your face huh? Thats the second retard I have heard say the same sentence in a week about an aniv. Banshee!

Sold

Never got a PM, so I sent you one with the Paypal info.

Ok $150 shipped thats the lowest I'm going, low ballers don't bother, I'll smash these Fawkers before I go through the hassel of shipping them for less.

Its off the 2000 in my sig. I returned your PM too.

PM sent

Yeah I want to trade my black clutch perch and lever + my Black master cylinder and brake lever for a good silver one. I don't want black hand controls. I am going to buy a CR style clutch perch and lever. Can I see pics of what you have to offer?

Anyone want to swap my Black master cylinder, and brake lever on my bike, for your silver ones? They are in perfect shape, just looking to get the silver ones. I will even throw in the clutch side with parking brake junk machined off to match it

Don't do it! Keep the Sand Stars! Then I'll for sure get you ! Ha Ha. Get the 8 paddle.

Probably out playin with all the cash he made during Christmas!

I saw those too while planning to buy some Haulers. They look like the same tire, and they may be just as good but only time will tell. $99 for just the tires is kinda high for off brands since you can get Skat Trak's mounted on wheels for $199 shipped to your door over at RMATV. I decided to go with the tried and true.

Sold, thanks Josh!