AZ Erik

Well this is pretty much all that's left.... no title but it's a damn nice frame. Little spot in the front where the coating got a little rubbed due to being towed, a front bumper would hide that easily. 1 foot pg bolt needs to be ez-outed as it broke off when I was tearing down the bike. (I paid over $300 to coat the frame alone last april) I'm asking $200 + shipping Last one I shipped to Cali was about $32 to ship. Comes with everything you see on it Ping me here please

Most everything is on ebay currently. The Fullbores are not perfectly flawless as they even had scratches in the very back when I got them. Current listings minus the motor: http://search.ebay.com/_W0QQsassZeriklarsonaz

THe J arms were sold. Just the A-arm and spindles remain.

motor will be on ebay shortly, the builder is listing it, should have been up by now.

The bike being parted: Current ebay auctions for little items: http://search.ebay.com/_W0QQsassZeriklarsonaz Prices are shipped in the states, I am open to offers and accept paypal Chrome swinger $170 shipped (small chip in chrome where axle carrier clamps) Chrome J-arms $90 shipped includes billet blue bearing caps Chrome A arms $90 shipped includes billet bearing caps Frame with radiator and stem ($320 shipped)no title or visible vin Axle $40 + shipping Rear hubs powder coated blue includes lugs ($25 shipped) Front hubs powder coated blue with fresh bearings and seals, includes lugs $45 shipped Front Spindles powder coated blue $35 shipped Powder coated blue rear sprocket hub with stock gear (steel) $35 shipped Powder coated blue rear brake hub with rotor ($30 shipped) Cascade castle nut covers with pins and o rings $50 shipped, need clean up polish Powder coated blue axle carrier with fresh bearings and seals ($50 shipped) Swing arm link $22 shipped polished, needs clean up polished Full set of chain guides All blue, chain slider, upper and lower chain rollers and swinger guide. all 10 hours old $30 shipped Carbon fiber black/blue tank cover, real CF not a faker. $40 shipped

I'm having to part this bike due to no decent offers. I have a candy blue powder coated frame with clear coat (no title) that I am not sure if I want to put on ebay or not. This bike is being parted: Fullbore rear fenders $275 shipped (couple scratches nothing more than sand scuffs) Candy Blue frame with clearcoat, 87 frame, includes radiator and random stainless bolts ($350 shipped, I paid over that to powder coat the frame) NO TITLE ON FRAME **Needs 1 footpeg bolt removed from right side, I don't have the tools Chrome J arms, chrome is in OK condition, couple rust spots in the weld areas $100 shipped, includes blue billet bearing caps) Chrome a arms, in same condition $120 shipped Includes blue billet bearing caps +4 chrome square tube swing arm. $270 shipped, there is a small chip of chrome missing at the axle carrier mount, I can get a pic of it, not a big deal. front smooth buffs $100 shipped front and rear shocks Great condition, red springs under the shock covers with tribal shock wears ( $150 shipped) Motor will be on ebay listed by AZ Custom Quads Anything anyone is looking for? I am in Tucson AZ, can ship Current auctions: http://search.ebay.com/ebaymotors/_W0QQsassZeriklarsonaz

Price drop to $4300 you pick it up. Now includes Trailtech lights. as well. I am open to serious offers. I REALLY don't want to part this one out. Ping me here or email me at [email protected]

Here she is, the newest one is up for sale. I've changed my mind again on what I really want to ride this dune season so this one is up for sale now. It is a fast Banshee. I weighed 290+ and was eating up nearly anything on the flat drags. With a lighter rider (180lbs) not much at the hills stood a chance (aside from big bore cubs and stuff like that) It's an 87, nearly everything is new. This is a clean bike, probably have 12 hours total on it since the ground up building of it that was completed in April of this year. Ridden on 5 dune trips. Powder coated candy blue with flake frame. +4 chrome swing arm Stock lower engine, stock bore. Severe port work (about 8 hours total spent on porting) Kehien 36mm carbs Tomey T5 pipes Prodesign coolhead with 20 cc domes, pump gas ready, I have 18 cc's that puts the motor over 185 at Glamis Fullbore candy blue fenders. Front is ready for paint (I can try to paint this however you would like) Duncan racing reed valves Duncan racing billet intakes Dyna FS 4 way programmable ign with stock and 3 performance curves ESR big bore filters Trailtech big bar clamp and big bars Trailtech hi powered lights. Skat Trak 10 paddle haulers Lots of Billet as normal. Carbon fiber tank cover I removed the front brakes and am pretty sure I have them around here somewhere. Chrome J-arms, a - arms, swing arm and random other things. I have all the build pictures for this bike. Only ever been ridden in the dunes. I am willing to let it go for $5,000 or trade for a Raptor 700 (only a Raptor 700) I do not have a title on it currently but can if one is needed. I am located in Tucson, AZ Can ship within 200 miles myself, anything more than that buyer should schedule delivery. Please PM me here if serious or email [email protected]

Here she is, the newest one is up for sale. I've changed my mind again on what I really want to ride this dune season so this one is up for sale now. It is a fast Banshee. I weighed 290+ and was eating up nearly anything on the flat drags. With a lighter rider (180lbs) not much at the hills stood a chance (aside from big bore cubs and stuff like that) It's an 87, nearly everything is new. This is a clean bike, probably have 12 hours total on it since the ground up building of it that was completed in April of this year. Ridden on 5 dune trips. Powder coated candy blue with flake frame. +4 chrome swing arm Stock lower engine, stock bore. Severe port work (about 8 hours total spent on porting) Kehien 36mm carbs Tomey T5 pipes Prodesign coolhead with 20 cc domes, pump gas ready, I have 18 cc's that puts the motor over 185 at Glamis Fullbore candy blue fenders. Front is ready for paint (I can try to paint this however you would like) Duncan racing reed valves Duncan racing billet intakes Dyna FS 4 way programmable ign with stock and 3 performance curves ESR big bore filters Trailtech big bar clamp and big bars Trailtech hi powered lights. Skat Trak 10 paddle haulers Lots of Billet as normal. Carbon fiber tank cover I removed the front brakes and am pretty sure I have them around here somewhere. Chrome J-arms, a - arms, swing arm and random other things. I have all the build pictures for this bike. Only ever been ridden in the dunes. I am willing to let it go for $5,000 or trade for a Raptor 700 (only a Raptor 700) I do not have a title on it currently but can if one is needed. I am located in Tucson, AZ Can ship within 200 miles myself, anything more than that buyer should schedule delivery. Please PM me here if serious or email [email protected]

Up for sale are my Maxxis Rooster v paddles. Clean rims, not a single repair on the tires. Rims need a tiny amount of polishing on the lips as normal. I really have mabe 10 hours of ride time on these. Never ridden on the street. Well worth it. Damn expensive tires $150 plus shipping (about $20 in the US) Paypal accepted 20x11x10's on ITP rims (no sure what the rim is, looks like a shamrock but the lip appears to be about a 160, Rocky mountain says T-9 Grand prix wheels, .190)

Yes I do! PM'ed you sir

must be mint or near mint. Let me know if ya have one.

I have the seal, the problem is I'm only missing this piece and there is no part number for it. I made a bronze bushing for this trip but it's not perfect so the thumb is harder to push than normal plus the 2 35mm PWK's. I just really need that stupid piece that is circled.

Somewhere along the line of powdercoating something got lost inside my thumb throttle. It's like a bushing and a seal or something. I'm looking for anyone that might have these pieces laying around. Possibly an entire stock thumb throttle if it really comes down to it. please let me know if you happen to have these parts.

Looking for a nice set of 10 paddle 22 inch haulers. This is the only size I am looking for. I have a set of 8 paddle Roosters for possible trade.

Perfer Black or a dark color. I only need the rear fenders. Normal color fading is ok but no cracks. I'm planning on dune cutting them so scratches are not a big deal. PM me let me know what ya got. I'm going to end up painting them so color outweighs price :biggrin:

any chance you want to seperate the seat and cover? I'm digging the cover but don't need the foam and all

That looks 10000 times nicer :beer: I'm missing those plastics already

I paid him last night for the lights :beer:

Nothing yet. I'm not holding my breath though, I had a truck stolen 7 years ago from about the same neighborhood and they found it 4 months later pretty much where they said it would be 4 months before. I just realized some other stuff I don't have anymore, I'm updating the list again.

Just the J arms, not the lowers? (BTW they need ball joint covers) I need to find out how much I was charged to blast them.

Plastics and seat cover sold.

Yep

Tucson. Price doesn't include shipping but shipping can't be that much. If your kinda close I'll deliver or meet you somewhere. I'm heading through PHX Thanksgiving day and Dec 2nd. I'm currently trying to locate the motor, swinger, front tires that were removed from my truck yesterday. I have a pretty damn good idea who the punk or punks were as only a handful of kids in this neighborhood ride or have ever shown interest in the bike. Currently I'm missing the motor, the CPI's and 1 of the stingers (I still have the right side) the swingarm, my billet bar clamp, with the bars still attached, Front sandstars probably something else. I've unloaded the bed of the truck so I'll keep what's left in my possession. My wife was nice enough to back the truck out of the garage to get down some of the Christmas crap, she left it out there all day. I noticed around 6:30 when I went and took the trash out the truck wasn't in the garage and the door was closed, I thought someone jacked my truck! I spent saturday night, sick, looking around the desert of my house for any place they might have stashed stuff. Got a couple nice dents in the truck bed thanks to this as well. I'm just thrilled at this point. I even had the motor sold to a nice guy in Michigan. This is my luck..

Updated orginal post.