Jump to content

bombedbanshee06

Members
  • Posts

    167
  • Joined

  • Last visited

Everything posted by bombedbanshee06

  1. My bike dose not like the air box lid beeing off it seems to choke what would be this cause cheers Ian
  2. them motor must be pretty poor.the banshee motor will be heeps better in there
  3. what the im new too this a bit thick ::
  4. JUST PUT NEW REEDS AND A BOOST BOTTLE NO IT REVS REAL HARD BUT NOT GOING ANY WERE ITS NOT THE CLUTCH I THINK IT MITE BE THE TIRES (THERE STOCK) WHAT DO YOU GUY THINK CHEERS IAN
  5. hI I VE GOT TOOMEY TR6 AND I REALLY HAPPY WITH THEM THEY PERFORM GREAT I JUST ADD A BOOST BOTTLE AND SOME BOYSEN POWER REEDS ASWELL BUT EVERY THIN ELSE IS STOCK. GOOD LUCK HOPE YOU FIND WHAT YOU WANT
  6. THEY LOOK GOOD MITE BUY THEM
  7. DONE THAT WHEN I RIDE IT THE FRIST TIME WITH THE TOMMEYS ON IT
  8. THAT GOT TOO SUX BIG TIME
  9. Good shit post some photos when you can
  10. how do you work out tires for your rims i want these 1 my rims are standard thanks Ian
  11. you are so right there it looks shittttttt
  12. motul 32:1l smells good but lots of $$$$$$$
  13. just put my tommeys t6 and my k&n on . i can t beleave the power increase they rock
  14. 50 years of Yamaha i fixed it now
  15. just brought the 2006 yamaha 50th Anniversary model here is a pic Its got tommey T6 on it now but
  16. really funny aren t ya it was just a thought
  17. look on the tommey site they show a dyno reeding for fmf and tommey t6 here the web site http://www.toomey.com/image/FMF_lg.jpg
  18. the oil ratio for 33 to 1 is 150mls per 5 litres or 114 mls per US gallon is this right . just like to make sure Ian
  19. The bike is brand new been ridden once
  20. i did them seperate
  21. its ok if the cable not attached
  22. VALVE, THROTTLE won t go down after change the neddle ii put the old 1 back in as it dose the same thing what could this be fixed it was the idle screw threaded
  23. Im at sea level if i put 310 main jet with the stock neddle and the fuel and air srew 1 and a half turn would that be just about right im running tommey t6 and a k&n with no air box lid
  24. banshee revs by itself after putting on t6 280 main jets and the neddle clip on 4th from the top it got a k &n on as well what shold this be thanks Ian
  25. im running tommey t6 with a k&n no snorkel airbox lid on and 12 1 inch air filter thing s that came with the tommet kit should i run the 280 main jet that it came with or go bigger to be safe i live in perth western australia Thanks Ian
×
×
  • Create New...