810darren

welcome to the hq hope you enjoy.show us some pics when ya get her home

i see you have a lid on i would start the jetting at 310 mains 27.5 pilots 3rd position on needle wich is stock position maybe even 290 see if the 310s are to rich 340s sound high for lid on.

if its fludding out at idle that would have to either be your clip position on the needle or your pilot jet.try moving your clip on the needle 1 position twards the top of the carbs and backing your air screw counter clockwise half a turn see if this im proves your problem if it gets better try another step higher on the needle.if no big differnce i would try a smaller pilot jet hope this helps

if you look at the underside of your frame by the back of the foot pegs there will be a hole on each side back there for water to drain.lot of times it will not all leak out also up front by where your pipe hangers are located behind there is another hole on each side.i just use an air blow off and put it to the holes and just blew it out as best as i could.but the other 2 holes are in the general area of the pipe hangers if i remember correctly.it would take years of setting before it would ever rust all the way threw you should be fine.hope this helps

hey i live in flint mi is there any decent riding spots other than the mounds off mt morris rd.id probally be to loud there.i get in with the dirt bike.ill have to take the banshee over there for a sound check pm me if ya want

this is the only dam pic i could get to work

thanks every one who helped with questions here is a pic.took it out today for about 10 minutes she seemed like she wanted to pull pretty hard.also wesw the 330 mains 27.5 pilot 4th clip seems to be workin good she fired up 3rd kick.will do a plug chop after shes broke in thanks again guys.

your right 40 to 1 would be less oil

got it broke not brooke sorry man

CHRIS I DONT KNOW YOU IM GETTING READY TO CLICK ON YOUR CLICKY BUT BEFORE I DO MY PRAYERS GO OUT TO YOUR FAMILY THREW THIS TOUGH TIME IN YOUR LIFE.I BELIEVE THAT MURDERES DESERVE EQUAL PUNISHMENT FOR THIER ACTIONS GOD BLESS.

YEA MY MOM I THINK HAS THE SAME THING OUR SOMETHIMG REAL SIMILAR SHE JUST GOT A NEW SET UP.SHE BOUGHT A E MACHINE.I THINK A PRINTER LIKE YOUR TALKIN ABOUT CAME WITH IT.LOOKS LIKE YOU WOULD NEED A DEGREE TO USE IT.ITS GOT A 2BY 2 SCREEN IF I REMEMBER RIGHT ITS A GRAYISH BLACK COLOR A LITTLE MORE TWARDS THE DARKER SIDE THOUGH.FRIKIN THING LOOKS SWEET THOUGH.HOPE YOU ENJOY YOUR NEW PRINTER MAN.

just take basic pics.stuff to throw on ebay and here of course..also vacation and stuff.thanks for your imput brooke.

i was looking at the kodak easy share but i dont know about this cause there sure is alot of refurbs out there may look at a cannon our olympus thanks guys just dont want to drop a but load of money into one

what a fuckin lunitic

i just put the dirt bike in my avitar cause i dont have any pics of the banshee yet had dirt bike pics so i just scanned them.need a digital camera.wish i had one to take you guys along for the ride threw out my progress.shit at this piont im about to borrow my moms.any suggestions on what brand.guessing that you will see when complete by time i get a dam camera.maybee ill go buy some film tomarrow.scan a few pics.

have a safe trip enjoy some of the sun for me.looks like we have a few more months around here.

man that sounds like some scarry shit.i live in michigan never seen a nasty lookin spider like that

motosport.com they have any tire you want thier tire combos 4 the 450 are $109 for front and rear for the dunlops.plus they have a professional race team.they have about 17 guys for phone sales that basically all ride.# is 1-888-676 8853 good luck hope this helps your buddy!

thanks for all the replies its kinda nice to get another side of every one.just wanted to change it up a bit.been reading alot of bitching lately

happy b day man

then you know michigan weather can suck.prolly pretty steady over there in az

i hane no problems with mexicans except every summer they come here and cut my dam under ground cable putting in them sprinkler systems

hey every body just thuoght i would throw this out there.i live in flint michigan and i love messing with my toys im 34.if you seen in my other posts im redoing a 98 banshee bought for 1,800 prolly will end up with about 3,500 into it when done.my son told me today my wife said she will be glad when im done with it because thats all she has heard about the last 5 months but hay im enjoying this shit im gonna ride as long as i can.anybody in michigan maybe hook up this summer go tear up some shit.where is every body from!