Lethaface

Not at the moment. I wanna sell out right but if it dosn't sell o i get no offers i may consider it. Thanks stacy, as long as your able your more than welcome.

Up for grabs is my drag bike.. I Just finished the build about a month ago and it's been out to the strip twice.. Less than 15 1/8th mile passes on it.. The only reason i'm selling is to fund a car project. Only thing left stock on the bike is the a-arms and ingnition system. No short cut's taken with this quad. Started building it in september of '06 and finished it September of '07. It was built from the ground up so everything has been went through. The bike has all new bearings, seals and bushings. Motor has 185lbs of compression @ 2000 feet elevation. There is absouloty nothing at all wrong with it, just want to build a car. Mod list is as followed.. -Engine- 68mm Cheetah Cub cylinders Hot Rods Long rod 4mm Stroker Crank 1-5 RDZ override Trans. with neutral down Port Matched Cases CPI out of frame Drag Pipes for Small Bore FLOW TECK Lightened Flywheel Cut Stator for 4 deg. Timing advance 39mm PWK air stryker Alky carbs Dave Moore Powerjets for methanol K&N Clamp On filters with outerwears Mikuni Fuel pump Billet Clutch Basket Barnett R6 Clutch System Majic Performance Clutch Lockup Pro Design Cool Head Majic Performance 18cc domes Wiseco Pro lite 68mm Blaster pistons Trinity Stage lV Intakes with Crossover tube elimator TDR epoxy reed with ported cages TDR Reed Spacers Pingel Dual Feed Fuel Valve All bolts replaced with Stainless allen head and acorn nuts -Body- Lightened, 3 stage pc'd Frame with all excess tabs removed CFM +6'' Swingarm 8500 ft lb non o-ring chain Polished Axle Custom Cut seat front lowering shock 05' Special edition plastics Custom Graphics(Special made by BRMoffroad, only set in the country) Custom Grill by H3welds Billet Amber Light Headlights UPP Long Chain slide system All cables by Pro motion Adjustable Ride height Rear Strut Adjustable Wheelie bar Chrome Drag Bars MSR levers Chrome Shifter and brake Lever Stainless brake line Double wide foot pegs ITP .190 wheels Hoosier 60-15-10 Rear tires Billet Hi-Flow Gas Cap Majic Performance EZ change clutch cover TON'S OF BILLET AND CHROME!! I'm not gonna list it all just look at the pics.. That's all i can remember atm, i'm sure there is much more i'm overlooking.. Ask anybody who's seen this bike it's super clean and very fast! Asking $7500 OBO or will consider trade for a V8 mustang/muscle car of equal value.. Will also take a lesser valued car and some boot.. Bike will be at I40 dragway in crossville this saturday if potential buyers would like to have a look at it or watch it run.. This really is a TURN KEY AND FLY!

As of now it looks like mac to me. He has the most experience it seems..

I agree about wiseco. I've never had a problem with one of there pistons.. I've never had a melt down or piston failure to date. On the other hand i have nothing bad to say about WSM as i've never had any experience with them, but i would stay away from vito's..

he'd do the same thing for me.. BTW, got the money for the pipes.. Thanks! jeremy

Stacy had to be taken to the hospital wed. night. He had to have his appendix removed.. I will be taking care of the shipping for those of you who ordered.. The cubs will go out in the morning.. Sorry for any inconvience, Jeremy

Free bump!.. Don't let the low post count shy you away from buying from him, he's legit and a good friend.. TTT!

Sorry everything is sold..

Ohhh i didn't mean it to discredit you.. I will send the money now through paypal if you want it.. I just like i said intended on just paypaling it to you the day they showed up as i was a couple days late when we were both supposed to ship out so i figured it would be the same either way.. Your call though man pm me the paypal addy and you'll ahve your money tonight.. Jeremy

Sure somethings not up with the P.O. chase?? I know before you recieve money from myself, you always have my stickers in the mail and i normally recieve them before you get money or at least paypal you on the day or day after.. However, It's been something like 10 days and mine havn't got here yet either.. Wonder if somebody went postal at the Post office down there in miami lol.. I'm Not at all saying the way he handled it is right, he should have contacted you if there was a issue, but you never know after it leaves your box man..

I was wondering what happened to him.. He was in tennessee one night on his way to get my banshee and then i never heard from him again.. I assumed he had, had a change of heart..

Need a set in good shape! No boot rips or anything like that..

Yeah i agree.. The transfers on a set of stock cylinders are already small enough.. Adding the big bore sleeves just make them worst.. Besides paying for the kit remember those sleeves have to be pressed in.. My buddy ended up having about $700 in his set before porting.. Also the pistons are getting harder to get.. ProX isn't making them anymore so you have to buy a different type that is about $300 a kit.. We were lucky to find a builder who had a set on a shelf.. Like bad said, I would just get a set of stock cylinders and have them ported.. For 700-1000 to get them set up, you could have a stock stroke cub motor..

Need to sell these things pretty quick.. They fit 34-36mm carbs and come with the crossover tube.. $110 shipped paypal only

Crossover tube in place?? The tube that connects the 2 carbs?? Also check the carbs and make sure they are sync'd..

As far as using a fuel additive, Just do it right and take them apart.. Check your pilot jets like said before, that will also make it hard starting..I highly doubt your petcock is a issue but if it makes you feel more comfortable take the gas line off and make sure gas flows freely.. Also blow threw the gas cap line and make sure there is no obstructions in the line.. Not that i think that is your starting problem but may be your lack of fuel problem..The air fuel screw is the little screw thats to the bottom left of the fuel inlet.. They are normally 1.5-2 turns out from lightly seated..

not sure if i missed it but remove the filter and look into the airbox while you have somebody slowly push the throttle in.. Make sure both slides are coming up and down at the same time.. Had a issue like this once and it was the culpret..

Klotz R50 @ 40:1

Damn dave you get those sparkies that fast??? Thanks rhonda glad you like it..

Several transactions with this fellow.. Always top notch!

Your one stop spot for chainsaw parts

Ahhh shit, I knew this guy was up to no good.. He was trying to work out a trade with me, told me he had no paypal yet i brought up a page where he sent paypal to bansheerage.. If any of you have his address post it up so you guys can call his local police station..

thanks man i appreciate it.. Jeremy

Wanting to trade my complete set of yellow plastics for white or black.. May consider other colors(no yamaha blue)..Mine comes with custom grill and plastics..My only requirements are the plastics must be clean with no breaks, repairs or stress marks.. Mine are a very nice clean set and thats what i'm wanting to trade for.. Preferably from a dune or drag bike.. Basically something that hasn't been scratched to death by trees.. Will also throw in some boot or parts on a set of full bores..

Still for sell..Just selling them to buy a different color plastic Comes with graphics and grill.. $300 shipped