06BaNsHeE

Im still looking..Can I see some pics?

Yea you need 110 or higher with that timing and compression

You need to come down to miami then

Oye boricua :biggrin: porque las jentes de tu Pais se ponen bravo si tu dice que te pico un bicho? Sorry Guys thats spanish but IM just so Curious about something...

I need stock cylinders.65mm or under.My builder told me to try and stay under 150 because anything over and he will find me a better deal.Dont care if they need to be bored or not.Tell me what you got.Thanks.THEY CAN NOT BE PORTED

Is there sand in that place?

IND @ TEN Indy GB @ NYG Green Bay CIN @ CLE Cinci HOU @ CAR Carolina NO @ TB New Orelans BUF @ PIT Pitt ATL @ JAC Jacksonville SF @ STL Rams MIN @ DET lions SEA @ ARI Seattle DAL @ MIA Miami KC @ CHI Chicago NYJ @ BAL Balitmore OAK @ DEN Denver SD @ NE Pats(No way there going to stop Randy) WAS @ PHI- Philly

Call jeff at FAST.Hes will talk to you and set you up

95 hp with a 10mm Cub???Thats not impressive at all

Oh shit nevermind what I said...PLease slap him for me then

Sorry man but if your stock and he has a decent runnig 440ex I think he will beat you.You need some Pipes and Filters so you will never ever loos to a 400ex

yea man thats a ton of oil. Run 32:1.Thats what i have always ran and I barely foul plugs.Good luck with new shee :thumbsup:

Im like your height or a little bit taller and like 45 pounds less and I feel just fine on my banshee

I go riding sometimes with a 5mm cub with drag pipes and duneable override trans and he does fine with pod filters.He just stays away from the water tho.But if it mud only and you can avoid water I say go for it.Ofcousre the mud I ride is the type of mud that is Dry and sticks on to your bike ::

I would go for T5s for more playing around type of power.If your into drag racing then Shearers.stay away from CPIs unless you get them Cheap

I have a friend with a 450r that will run you..Im sorry but your bike is slow as shit with only those mods

When My bike would run on one cylinder it would go more than 20 atleast.

I have called Jeff at fast,Rob at RDZ,And Nate McCoy.Jeff phone was disconected so I didnt get to talk to him,Rob just told me hell call me back and never did.But Nate spend about an hour explaining to me my different options with my budget And my weight.He taught me alot over the phone even tho he may not know it lol.SO hes going to be the one building my motor.I also sent rob a message through ebay about some pipes and he never responded.So I guess he doesnt realy need customers that bad

Sounds like a parking brake problem to me.

Im going to run a pingel on a 4mm cub with 38pwks and large billet bowls.Thats on gas.My builder told me to run a fuel pump if Im going to run alky

Sorry just trying to trade

OK guys cylinders for now are sold Pending payment.ANd head also. Carbs are still available.They have 320 Jets in them right now and TORS eliminator kit

Anyone wanna trade Inframe Shearers for OOF?They need to be small bores and Chrome.I prefer them to be one out of each side bit really dont care.

WTF did you just Say??

Cylinders,pistons,head,carbs,and airbox are going on ebay on tuesday.Jhuges ill let you know when I have the crank out.Ill send you a PM